[Wed Jun 5 01:13:47 2013] Detection parameters: Position = (206.2, 293.2) = 7 23 29.16 -25 48 6.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 67.8 +/- 11.6 Background counts = 19.1 Rate = 0.003 +/- 0.0006 [Wed Jun 5 01:13:47 2013] Off-axis axis estimate = 6.70' [Wed Jun 5 01:16:33 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 01:16:33 2013] Initial guess for spatial extent in simple fitting = 9.78" [Wed Jun 5 01:16:33 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.192 [Wed Jun 5 01:16:33 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 9.78" [Wed Jun 5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27.ximg exists [Wed Jun 5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27.csv [Wed Jun 5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27_1.ximg exists [Wed Jun 5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27.csv [Wed Jun 5 02:28:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists [Wed Jun 5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27.csv [Wed Jun 5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists [Wed Jun 5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27.csv [Wed Jun 5 02:28:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 04:05:23 2013] Source 28 is offset by 7.419960 and -5.068141 pixels which is larger than 2 X fitted extent = 1.123821 x 1.123821, not incorporating fit results [Wed Jun 5 04:05:23 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 04:05:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 04:05:23 2013] Assessing source extent using major [Wed Jun 5 04:05:23 2013] Source does appear to be extended [Wed Jun 5 04:05:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 04:05:50 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 04:05:50 2013] Initial guess for spatial extent in simple fitting = 9.78" [Wed Jun 5 04:05:50 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.192 [Wed Jun 5 04:05:50 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 9.78" [Wed Jun 5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27.ximg exists [Wed Jun 5 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27.csv [Wed Jun 5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27_1.ximg exists [Wed Jun 5 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27.csv [Wed Jun 5 05:08:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists [Wed Jun 5 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27.csv [Wed Jun 5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists [Wed Jun 5 05:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27.csv [Wed Jun 5 05:08:40 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 06:24:02 2013] Spatial fit model total counts = 266.292000, observed total counts = 226.000000 [Wed Jun 5 06:24:02 2013] Poor agreement between spatial fit and data for source 28 It may help to tweak spatial fit manually Not incorporating fit results [Wed Jun 5 06:24:03 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 06:24:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 06:24:03 2013] Assessing source extent using major [Wed Jun 5 06:24:03 2013] Source does appear to be extended [Wed Jun 5 06:24:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 06:24:29 2013] XMMSAS src. selection expression = ellipse(17891.640488, 25459.895752, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 06:24:29 2013] Writing source region out to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_src.reg [Wed Jun 5 06:24:29 2013] Extracting stamp from image fullrun_pn_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (169, 256) - (244, 331) [Wed Jun 5 06:24:29 2013] XMMSAS bgd. selection expression = annulus(17891.640488, 25459.895752, 1087.500000, 2175.000000, X, Y) [Wed Jun 5 06:24:29 2013] Writing fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28.gif [Wed Jun 5 06:42:28 2013] Mean detx,y = (-8474.55, -1727.21) [Wed Jun 5 06:42:32 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 06:43:03 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 06:43:04 2013] Setting source spectrum file to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Wed Jun 5 06:43:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_bgd.pi.gz [Wed Jun 5 07:06:15 2013] Not generating rmf since there are only 67 counts [Wed Jun 5 07:06:15 2013] rmf not generated due to insufficient counts [Wed Jun 5 07:37:34 2013] Updating aperture counts using extracted products [Wed Jun 5 07:37:34 2013] Total counts from fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 182.00 [Wed Jun 5 07:37:34 2013] Total counts from fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 956.00 [Wed Jun 5 07:37:34 2013] Got source and background scale factors 1155009.000000, 9791222.000000 [Wed Jun 5 07:37:34 2013] User source parameters: Position = (206.2, 293.2) = 7 23 29.16 -25 48 6.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 69.2 +/- 14.5 Background aperture counts = 112.8 Rate = 0.003 +/- 0.0007 [Wed Jun 5 07:37:34 2013] Updating counts from extracted products [Wed Jun 5 07:37:34 2013] Set source signif. to 69.23/10.62 = 6.52 [Wed Jun 5 07:37:36 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 07:37:36 2013] Using photon index=1.80, rate=0.00345, arf fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28.arf [Wed Jun 5 07:37:36 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 07:37:36 2013] Updating source flux to 3.2e-14 [Wed Jun 5 07:37:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 07:37:52 2013] xmm0691190101/analysis//spectral/fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete