[Wed Jun  5 01:13:47 2013] Detection parameters:
  Position = (348.0, 298.7) = 7 22 43.49 -25 47 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.5 +/- 14.8
  Background counts = 19.6
  Rate = 0.009 +/- 0.001

[Wed Jun  5 01:13:47 2013] Off-axis axis estimate = 3.59'
[Wed Jun  5 01:16:33 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 01:16:33 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Wed Jun  5 01:16:33 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Wed Jun  5 01:16:33 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.22"
[Wed Jun  5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jun  5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26.csv
[Wed Jun  5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jun  5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26.csv
[Wed Jun  5 02:28:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jun  5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun  5 02:28:21 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jun  5 02:28:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Wed Jun  5 02:28:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:23 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.322317 pixels away
[Wed Jun  5 04:05:23 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:23 2013] Assessing source extent using major
[Wed Jun  5 04:05:23 2013] Source does appear to be extended
[Wed Jun  5 04:05:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 04:05:50 2013] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 04:05:50 2013] Initial guess for spatial extent in simple fitting = 8.22"
[Wed Jun  5 04:05:50 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Wed Jun  5 04:05:50 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 8.22"
[Wed Jun  5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jun  5 05:08:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26.csv
[Wed Jun  5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jun  5 05:08:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26.csv
[Wed Jun  5 05:08:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jun  5 05:08:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Jun  5 05:08:40 2013] fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jun  5 05:08:40 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Wed Jun  5 05:08:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 06:24:02 2013] Spatial fit model total counts = -314.690000, observed total counts = 273.000000
[Wed Jun  5 06:24:02 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 06:24:03 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:03 2013] Assessing source extent using major
[Wed Jun  5 06:24:03 2013] Source does appear to be extended
[Wed Jun  5 06:24:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 06:24:29 2013] XMMSAS src. selection expression = ellipse(30225.962738, 25937.163818, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 06:24:29 2013] Writing source region out to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_src.reg
[Wed Jun  5 06:24:29 2013] Extracting stamp from image fullrun_pn_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (310, 261) - (385, 336)
[Wed Jun  5 06:24:29 2013] XMMSAS bgd. selection expression = annulus(30225.962738, 25937.163818, 1087.500000, 2175.000000, X, Y) && !ellipse(28156.716800, 28125.947660, 351.276810, 351.276810, 0.000000, X, Y) && !ellipse(27773.903800, 26655.332400, 490.326414, 397.868811, 14.977996, X, Y)
[Wed Jun  5 06:24:29 2013] Writing fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27.gif
[Wed Jun  5 06:41:49 2013] Mean detx,y = (2712.73, 3395.94) 
[Wed Jun  5 06:41:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 06:42:15 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 06:42:15 2013] Setting source spectrum file to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun  5 06:42:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jun  5 07:05:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 07:05:59 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:34 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:34 2013] Total counts from fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 226.00
[Wed Jun  5 07:37:34 2013] Total counts from fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 996.00
[Wed Jun  5 07:37:34 2013] Got source and background scale factors 1144668.000000, 9913486.000000
[Wed Jun  5 07:37:34 2013] User source parameters:
  Position = (348.0, 298.7) = 7 22 43.49 -25 47 43.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 111.0 +/- 16.1
  Background aperture counts = 115.0
  Rate = 0.006 +/- 0.0008

[Wed Jun  5 07:37:34 2013] Updating counts from extracted products
[Wed Jun  5 07:37:34 2013] Set source signif. to 111.00/10.72 = 10.35
[Wed Jun  5 07:37:36 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:36 2013] Using photon index=1.80, rate=0.00554, arf fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27.arf
[Wed Jun  5 07:37:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:36 2013] Updating source flux to 3.9e-14
[Wed Jun  5 07:37:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 07:37:52 2013] xmm0691190101/analysis//spectral/fullrun_pn_xmm0691190101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete