[Wed Jun  5 01:14:40 2013] Detection parameters:
  Position = (465.8, 427.7) = 7 22 5.61 -25 38 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 14.8
  Background counts = 7.4
  Rate = 0.007 +/- 0.0007

[Wed Jun  5 01:14:42 2013] Off-axis axis estimate = 15.33'
[Wed Jun  5 03:10:39 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 03:10:39 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  5 03:10:39 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Wed Jun  5 03:10:39 2013] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.786
[Wed Jun  5 03:10:39 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 14.09"
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1.csv
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1.csv
[Wed Jun  5 04:05:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun  5 04:05:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:36 2013] Spatial fit model total counts = -1267.950000, observed total counts = 294.000000
[Wed Jun  5 04:05:36 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 04:05:36 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:36 2013] Assessing source extent using major
[Wed Jun  5 04:05:36 2013] Source does appear to be extended
[Wed Jun  5 04:05:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 05:40:21 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 05:40:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun  5 05:40:21 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Wed Jun  5 05:40:21 2013] source mask rpix=3.2, npix_max = 55, mask sum = 44, frac = 0.786
[Wed Jun  5 05:40:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.09"
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun  5 06:23:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1.csv
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun  5 06:23:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1.csv
[Wed Jun  5 06:23:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun  5 06:23:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun  5 06:23:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun  5 06:23:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 06:24:14 2013] Spatial fit model total counts = -1305.700000, observed total counts = 294.000000
[Wed Jun  5 06:24:14 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 06:24:15 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:15 2013] Assessing source extent using major
[Wed Jun  5 06:24:15 2013] Source does appear to be extended
[Wed Jun  5 06:24:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 07:23:27 2013] XMMSAS src. selection expression = ellipse(40476.916687, 37160.142578, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 07:23:27 2013] Writing source region out to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun  5 07:23:27 2013] Extracting stamp from image fullrun_mos2_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (428, 390) - (503, 465)
[Wed Jun  5 07:23:27 2013] XMMSAS bgd. selection expression = annulus(40476.916687, 37160.142578, 1087.500000, 2175.000000, X, Y) && !ellipse(37922.271393, 34604.467133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38026.757416, 34194.429718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38581.328560, 38304.200240, 419.720012, 226.612007, 232.792802, X, Y) && !ellipse(41368.462250, 35659.846588, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun  5 07:23:27 2013] Writing fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3.gif
[Wed Jun  5 07:23:29 2013] Mean detx,y = (-16756.84, 2003.14) 
[Wed Jun  5 07:23:30 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 07:23:46 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 07:23:46 2013] Setting source spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun  5 07:23:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun  5 07:30:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 07:30:33 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:40 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:40 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 173.00
[Wed Jun  5 07:37:40 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 197.00
[Wed Jun  5 07:37:40 2013] Got source and background scale factors 769538.000000, 4151122.000000
[Wed Jun  5 07:37:40 2013] User source parameters:
  Position = (465.8, 427.7) = 7 22 5.61 -25 38 21.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 136.5 +/- 14.2
  Background aperture counts = 36.5
  Rate = 0.006 +/- 0.0007

[Wed Jun  5 07:37:40 2013] Updating counts from extracted products
[Wed Jun  5 07:37:40 2013] Set source signif. to 136.48/6.04 = 22.58
[Wed Jun  5 07:37:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:43 2013] Using photon index=1.80, rate=0.00631, arf fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3.arf
[Wed Jun  5 07:37:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:43 2013] Updating source flux to 4.3e-13
[Wed Jun  5 07:37:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 07:37:49 2013] xmm0691190101/analysis//spectral/fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete