[Wed Jun  5 01:14:40 2013] Detection parameters:
  Position = (437.6, 393.6) = 7 22 14.65 -25 40 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.0 +/- 21.2
  Background counts = 8.1
  Rate = 0.005 +/- 0.001

[Wed Jun  5 01:14:42 2013] Off-axis axis estimate = 12.23'
[Wed Jun  5 03:10:39 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 03:10:39 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Wed Jun  5 03:10:39 2013] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.765
[Wed Jun  5 03:10:39 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.54"
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6.csv
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6.csv
[Wed Jun  5 04:05:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun  5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun  5 04:05:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jun  5 04:05:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:36 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.610984 pixels away
[Wed Jun  5 04:05:36 2013] Spatial fit model total counts = 350.688000, observed total counts = 262.000000
[Wed Jun  5 04:05:36 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 04:05:36 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:36 2013] Assessing source extent using major
[Wed Jun  5 04:05:36 2013] Source does appear to be extended
[Wed Jun  5 04:05:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 04:05:36 2013] Source is confused with source 1
[Wed Jun  5 05:40:21 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 05:40:21 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Wed Jun  5 05:40:21 2013] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.765
[Wed Jun  5 05:40:21 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.54"
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun  5 06:23:52 2013] Fit fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun  5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun  5 06:23:52 2013] Fit fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jun  5 06:24:14 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 14.610984 pixels away
[Wed Jun  5 06:24:14 2013] Warning, spatial fit 6 centroid is now closest to src. 1
[Wed Jun  5 06:24:15 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:15 2013] Assessing source extent using major
[Wed Jun  5 06:24:15 2013] Source does appear to be extended
[Wed Jun  5 06:24:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 07:23:27 2013] XMMSAS src. selection expression = ellipse(38026.757416, 34194.429718, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 07:23:27 2013] Writing source region out to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun  5 07:23:27 2013] Extracting stamp from image fullrun_mos2_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (400, 356) - (475, 431)
[Wed Jun  5 07:23:27 2013] XMMSAS bgd. selection expression = annulus(38026.757416, 34194.429718, 1087.500000, 2175.000000, X, Y) && !ellipse(40476.916687, 37160.142578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37922.271393, 34604.467133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39379.095160, 31958.723200, 610.124818, 363.598410, 92.339856, X, Y)
[Wed Jun  5 07:23:27 2013] Writing fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2.gif
[Wed Jun  5 07:24:41 2013] Mean detx,y = (-13339.21, 545.98) 
[Wed Jun  5 07:24:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 07:24:50 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 07:24:50 2013] Setting source spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun  5 07:24:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun  5 07:34:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 07:34:46 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:40 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:40 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 201.00
[Wed Jun  5 07:37:40 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_bgd.pi.gz = 420.00
[Wed Jun  5 07:37:40 2013] Got source and background scale factors 1148356.000000, 10471528.000000
[Wed Jun  5 07:37:40 2013] User source parameters:
  Position = (437.6, 393.6) = 7 22 14.65 -25 40 41.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 154.9 +/- 15.2
  Background aperture counts = 46.1
  Rate = 0.007 +/- 0.0007

[Wed Jun  5 07:37:40 2013] Updating counts from extracted products
[Wed Jun  5 07:37:40 2013] Set source signif. to 154.94/6.79 = 22.83
[Wed Jun  5 07:37:43 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:43 2013] Using photon index=1.80, rate=0.00717, arf fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2.arf
[Wed Jun  5 07:37:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:43 2013] Updating source flux to 2.2e-13
[Wed Jun  5 07:37:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 07:37:49 2013] xmm0691190101/analysis//spectral/fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete