[Wed Jun 5 01:14:41 2013] Detection parameters: Position = (425.3, 461.9) = 7 22 18.65 -25 35 52.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 27.5 +/- 6.7 Background counts = 6.4 Rate = 0.001 +/- 0.0003 [Wed Jun 5 01:14:42 2013] Off-axis axis estimate = 15.00' [Wed Jun 5 03:10:39 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 03:10:39 2013] Initial guess for spatial extent in simple fitting = 13.93" [Wed Jun 5 03:10:39 2013] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.985 [Wed Jun 5 03:10:39 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 13.93" [Wed Jun 5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25.ximg exists [Wed Jun 5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25.csv [Wed Jun 5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25_1.ximg exists [Wed Jun 5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25.csv [Wed Jun 5 04:05:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Wed Jun 5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25.csv [Wed Jun 5 04:05:11 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Wed Jun 5 04:05:11 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25.csv [Wed Jun 5 04:05:11 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 04:05:36 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 18.308412 pixels away [Wed Jun 5 04:05:36 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 04:05:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 04:05:36 2013] Assessing source extent using major [Wed Jun 5 04:05:36 2013] Source does appear to be extended [Wed Jun 5 04:05:36 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 05:40:21 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting [Wed Jun 5 05:40:21 2013] Initial guess for spatial extent in simple fitting = 13.93" [Wed Jun 5 05:40:21 2013] source mask rpix=3.2, npix_max = 54, mask sum = 54, frac = 0.985 [Wed Jun 5 05:40:21 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 13.93" [Wed Jun 5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25.ximg exists [Wed Jun 5 06:23:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25.csv [Wed Jun 5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25_1.ximg exists [Wed Jun 5 06:23:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25.csv [Wed Jun 5 06:23:52 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 06:23:52 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Wed Jun 5 06:23:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25.csv [Wed Jun 5 06:23:53 2013] fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Wed Jun 5 06:23:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25.csv [Wed Jun 5 06:23:53 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 5 06:24:15 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 17.137773 pixels away [Wed Jun 5 06:24:15 2013] Vigneting correction estimate = 1.000000 [Wed Jun 5 06:24:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 5 06:24:15 2013] Assessing source extent using major [Wed Jun 5 06:24:15 2013] Source does appear to be extended [Wed Jun 5 06:24:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 5 07:23:27 2013] XMMSAS src. selection expression = ellipse(36953.456512, 40139.085449, 652.500000, 652.500000, 0.000000, X, Y) [Wed Jun 5 07:23:27 2013] Writing source region out to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_src.reg [Wed Jun 5 07:23:27 2013] Extracting stamp from image fullrun_mos2_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (388, 424) - (463, 499) [Wed Jun 5 07:23:27 2013] XMMSAS bgd. selection expression = annulus(36953.456512, 40139.085449, 1087.500000, 2175.000000, X, Y) && !ellipse(38581.328560, 38304.200240, 419.720012, 226.612007, 232.792802, X, Y) [Wed Jun 5 07:23:27 2013] Writing fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18.gif [Wed Jun 5 07:29:28 2013] Mean detx,y = (-15046.85, 6142.37) [Wed Jun 5 07:29:29 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 5 07:29:47 2013] Binned source spectrum to 10 counts/bin [Wed Jun 5 07:29:47 2013] Setting source spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Wed Jun 5 07:29:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_bgd.pi.gz [Wed Jun 5 07:36:35 2013] Not generating rmf since there are only 27 counts [Wed Jun 5 07:36:35 2013] rmf not generated due to insufficient counts [Wed Jun 5 07:37:43 2013] Updating aperture counts using extracted products [Wed Jun 5 07:37:43 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 52.00 [Wed Jun 5 07:37:43 2013] Total counts from fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 160.00 [Wed Jun 5 07:37:43 2013] Got source and background scale factors 1029416.000000, 4706923.000000 [Wed Jun 5 07:37:43 2013] User source parameters: Position = (425.3, 461.9) = 7 22 18.65 -25 35 52.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 17.0 +/- 8.3 Background aperture counts = 35.0 Rate = 0.0008 +/- 0.0004 [Wed Jun 5 07:37:43 2013] Updating counts from extracted products [Wed Jun 5 07:37:43 2013] Set source signif. to 17.01/5.92 = 2.88 [Wed Jun 5 07:37:43 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 5 07:37:43 2013] Using photon index=1.80, rate=0.000787, arf fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18.arf [Wed Jun 5 07:37:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 5 07:37:43 2013] Updating source flux to 3.3e-14 [Wed Jun 5 07:37:48 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Jun 5 07:37:49 2013] xmm0691190101/analysis//spectral/fullrun_mos2_xmm0691190101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete