[Wed Jun  5 01:14:16 2013] Detection parameters:
  Position = (246.6, 372.2) = 7 23 16.12 -25 42 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 10.3
  Background counts = 6.6
  Rate = 0.002 +/- 0.0005

[Wed Jun  5 01:14:17 2013] Off-axis axis estimate = 6.53'
[Wed Jun  5 02:28:21 2013] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 02:28:21 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Wed Jun  5 02:28:21 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.806
[Wed Jun  5 02:28:21 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.70"
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jun  5 03:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17.csv
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jun  5 03:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17.csv
[Wed Jun  5 03:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jun  5 03:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jun  5 03:10:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jun  5 03:10:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 04:05:29 2013] Spatial fit model total counts = 151.173000, observed total counts = 113.000000
[Wed Jun  5 04:05:29 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 04:05:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:29 2013] Assessing source extent using major
[Wed Jun  5 04:05:29 2013] Source does appear to be extended
[Wed Jun  5 04:05:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 05:08:40 2013] Using EEF radius (= 9.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 05:08:40 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Wed Jun  5 05:08:40 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.806
[Wed Jun  5 05:08:40 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.70"
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src17.ximg exists
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Jun  5 05:40:21 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src17 appears to have run properly
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Jun  5 05:40:21 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Jun  5 06:24:07 2013] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.582449 pixels away
[Wed Jun  5 06:24:07 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:07 2013] Assessing source extent using major
[Wed Jun  5 06:24:07 2013] Source does appear to be extended
[Wed Jun  5 06:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 07:08:11 2013] XMMSAS src. selection expression = ellipse(21408.408661, 32331.106262, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing source region out to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun  5 07:08:11 2013] Extracting stamp from image fullrun_mos1_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (209, 335) - (284, 410)
[Wed Jun  5 07:08:11 2013] XMMSAS bgd. selection expression = annulus(21408.408661, 32331.106262, 1087.500000, 2175.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9.gif
[Wed Jun  5 07:12:13 2013] Mean detx,y = (6436.30, -2481.62) 
[Wed Jun  5 07:12:14 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 07:12:34 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 07:12:34 2013] Setting source spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun  5 07:12:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jun  5 07:22:42 2013] Not generating rmf since there are only 45 counts
[Wed Jun  5 07:22:42 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:38 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:38 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 96.00
[Wed Jun  5 07:37:38 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 402.00
[Wed Jun  5 07:37:38 2013] Got source and background scale factors 1121462.000000, 10477444.000000
[Wed Jun  5 07:37:38 2013] User source parameters:
  Position = (246.6, 372.2) = 7 23 16.12 -25 42 14.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 53.0 +/- 10.8
  Background aperture counts = 43.0
  Rate = 0.002 +/- 0.0005

[Wed Jun  5 07:37:38 2013] Updating counts from extracted products
[Wed Jun  5 07:37:38 2013] Set source signif. to 52.97/6.56 = 8.08
[Wed Jun  5 07:37:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:39 2013] Using photon index=1.80, rate=0.00245, arf fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9.arf
[Wed Jun  5 07:37:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:39 2013] Updating source flux to 6.1e-14
[Wed Jun  5 07:37:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 07:37:48 2013] xmm0691190101/analysis//spectral/fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete