[Wed Jun  5 01:14:16 2013] Detection parameters:
  Position = (363.2, 399.0) = 7 22 38.60 -25 40 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.4 +/- 7.3
  Background counts = 7.2
  Rate = 0.002 +/- 0.0006

[Wed Jun  5 01:14:17 2013] Off-axis axis estimate = 8.68'
[Wed Jun  5 02:28:21 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 02:28:21 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Wed Jun  5 02:28:21 2013] source mask rpix=2.5, npix_max = 35, mask sum = 24, frac = 0.678
[Wed Jun  5 02:28:21 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.77"
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src14.ximg exists
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed Jun  5 03:10:39 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src14 appears to have run properly
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed Jun  5 03:10:39 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed Jun  5 04:05:29 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.402706 pixels away
[Wed Jun  5 04:05:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:29 2013] Assessing source extent using major
[Wed Jun  5 04:05:29 2013] Source does appear to be extended
[Wed Jun  5 04:05:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 05:08:40 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 05:08:40 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Wed Jun  5 05:08:40 2013] source mask rpix=2.5, npix_max = 35, mask sum = 24, frac = 0.678
[Wed Jun  5 05:08:40 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 10.77"
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14.csv
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14_1.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14.csv
[Wed Jun  5 05:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14.csv
[Wed Jun  5 05:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 06:24:07 2013] Spatial fit model total counts = 126.174000, observed total counts = 105.000000
[Wed Jun  5 06:24:07 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun  5 06:24:07 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:07 2013] Assessing source extent using major
[Wed Jun  5 06:24:07 2013] Source does appear to be extended
[Wed Jun  5 06:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 07:08:11 2013] XMMSAS src. selection expression = ellipse(31551.865784, 34668.333862, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing source region out to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun  5 07:08:11 2013] Extracting stamp from image fullrun_mos1_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (326, 362) - (401, 437)
[Wed Jun  5 07:08:11 2013] XMMSAS bgd. selection expression = annulus(31551.865784, 34668.333862, 1087.500000, 2175.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17.gif
[Wed Jun  5 07:11:22 2013] Mean detx,y = (3847.66, 7619.24) 
[Wed Jun  5 07:11:23 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 07:11:47 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 07:11:47 2013] Setting source spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun  5 07:11:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun  5 07:22:27 2013] Not generating rmf since there are only 28 counts
[Wed Jun  5 07:22:27 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:38 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:38 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 82.00
[Wed Jun  5 07:37:38 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 365.00
[Wed Jun  5 07:37:38 2013] Got source and background scale factors 1203156.000000, 9409603.000000
[Wed Jun  5 07:37:38 2013] User source parameters:
  Position = (363.2, 399.0) = 7 22 38.60 -25 40 25.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.3 +/- 10.1
  Background aperture counts = 46.7
  Rate = 0.002 +/- 0.0005

[Wed Jun  5 07:37:38 2013] Updating counts from extracted products
[Wed Jun  5 07:37:38 2013] Set source signif. to 35.33/6.83 = 5.17
[Wed Jun  5 07:37:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:39 2013] Using photon index=1.80, rate=0.00163, arf fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17.arf
[Wed Jun  5 07:37:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:39 2013] Updating source flux to 3.7e-14
[Wed Jun  5 07:37:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun  5 07:37:48 2013] xmm0691190101/analysis//spectral/fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete