[Wed Jun  5 01:14:16 2013] Detection parameters:
  Position = (337.6, 336.9) = 7 22 46.83 -25 44 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 12.4
  Background counts = 7.3
  Rate = 0.005 +/- 0.0006

[Wed Jun  5 01:14:17 2013] Off-axis axis estimate = 3.98'
[Wed Jun  5 02:28:21 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Wed Jun  5 02:28:21 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Wed Jun  5 02:28:21 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054
[Wed Jun  5 02:28:21 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.42"
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun  5 03:10:39 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun  5 03:10:39 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun  5 03:10:39 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun  5 04:05:29 2013] Spatial fit model total counts = 130.042000, observed total counts = 141.000000
[Wed Jun  5 04:05:29 2013] Offset between fit and detection position for source 10 = 0.046950 pixels
[Wed Jun  5 04:05:29 2013] 127.740300 total counts/ 61.873800 bgd. counts: snr = 8.373580
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.046950 pixels
  Position = (337.6, 336.9) = 7 22 46.83 -25 44 57.7
  Extent = 5.1 (3.6-6.5)", rotation angle = 0
  Source counts = 65.9 +/- 11.3
  Background counts = 61.9
  Rate = 0.003 +/- 0.0005
[Wed Jun  5 04:05:29 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 04:05:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 04:05:29 2013] Assessing source extent using major axis lower bound
[Wed Jun  5 04:05:29 2013] Source does appear to be extended
[Wed Jun  5 04:05:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 05:08:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun  5 05:08:40 2013] Initial guess for spatial extent in simple fitting = 5.11"
[Wed Jun  5 05:08:40 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.068
[Wed Jun  5 05:08:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.11"
[Wed Jun  5 05:40:20 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5.csv
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun  5 05:40:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5.csv
[Wed Jun  5 05:40:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun  5 05:40:21 2013] fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun  5 05:40:21 2013] Fit fullrun_mos1_xmm0691190101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun  5 06:24:07 2013] Spatial fit model total counts = 124.790000, observed total counts = 137.000000
[Wed Jun  5 06:24:07 2013] Offset between fit and detection position for source 10 = 0.030856 pixels
[Wed Jun  5 06:24:07 2013] 121.959200 total counts/ 54.087100 bgd. counts: snr = 9.228783
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.030856 pixels
  Position = (337.7, 336.9) = 7 22 46.82 -25 44 57.6
  Extent = 5.3 (3.8-6.7)", rotation angle = 0
  Source counts = 67.9 +/- 11.0
  Background counts = 54.1
  Rate = 0.003 +/- 0.0005
[Wed Jun  5 06:24:07 2013] Vigneting correction estimate = 1.000000
[Wed Jun  5 06:24:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun  5 06:24:07 2013] Assessing source extent using major axis lower bound
[Wed Jun  5 06:24:07 2013] Source does appear to be extended
[Wed Jun  5 06:24:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 07:08:11 2013] XMMSAS src. selection expression = ellipse(29327.459600, 29261.265600, 318.128409, 318.128409, 0.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing source region out to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun  5 07:08:11 2013] Extracting stamp from image fullrun_mos1_xmm0691190101_pi300-10000_cl_sm2.00.img.gz, (319, 319) - (356, 355)
[Wed Jun  5 07:08:11 2013] XMMSAS bgd. selection expression = annulus(29327.459600, 29261.265600, 530.214015, 1060.428031, X, Y) && !ellipse(28173.638000, 28131.084120, 346.032010, 346.032010, 0.000000, X, Y)
[Wed Jun  5 07:08:11 2013] Writing fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10.gif
[Wed Jun  5 07:09:05 2013] Mean detx,y = (64.01, 3183.05) 
[Wed Jun  5 07:09:06 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 07:09:14 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 07:09:14 2013] Setting source spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun  5 07:09:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun  5 07:21:29 2013] Not generating rmf since there are only 67 counts
[Wed Jun  5 07:21:29 2013] rmf not generated due to insufficient counts
[Wed Jun  5 07:37:37 2013] Updating aperture counts using extracted products
[Wed Jun  5 07:37:37 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 79.00
[Wed Jun  5 07:37:37 2013] Total counts from fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 90.00
[Wed Jun  5 07:37:37 2013] Got source and background scale factors 313896.000000, 2575992.000000
[Wed Jun  5 07:37:37 2013] User source parameters:
  Position = (337.7, 336.9) = 7 22 46.82 -25 44 57.6
  Extent = 5.3 (3.8-6.7)", rotation angle = 0
  Source aperture counts = 68.0 +/- 9.9
  Background aperture counts = 11.0
  Rate = 0.003 +/- 0.0005

[Wed Jun  5 07:37:39 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun  5 07:37:39 2013] Using photon index=1.80, rate=0.00314, arf fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10.arf
[Wed Jun  5 07:37:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun  5 07:37:39 2013] Updating source flux to 5.6e-14
[Wed Jun  5 07:37:45 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun  5 07:37:48 2013] xmm0691190101/analysis//spectral/fullrun_mos1_xmm0691190101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete