[Mon Jun 24 22:20:46 2013] Detection parameters:
  Position = (387.9, 351.5) = 8 22 45.30 -43 18 58.4
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 448.0 +/- 35.6
  Background counts = 3231.4
  Rate = 0.01 +/- 0.0008

[Mon Jun 24 22:20:51 2013] Off-axis axis estimate = 7.54'
[Mon Jun 24 22:39:50 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Mon Jun 24 22:39:50 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Mon Jun 24 22:39:50 2013] source mask rpix=2.3, npix_max = 32, mask sum = 11, frac = 0.340
[Mon Jun 24 22:39:50 2013] Skipping simple spatial due to low active detector fraction
[Wed Jun 26 11:54:49 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:54:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:54:49 2013] Assessing source extent using major
[Wed Jun 26 11:54:49 2013] Source does appear to be extended
[Wed Jun 26 11:54:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 11:54:49 2013] Source is confused with source 133
[Wed Jun 26 11:56:03 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 11:56:03 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Wed Jun 26 11:56:03 2013] source mask rpix=2.3, npix_max = 32, mask sum = 11, frac = 0.340
[Wed Jun 26 11:56:03 2013] Skipping simple spatial due to low active detector fraction
[Fri Jun 28 20:49:39 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:49:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:49:39 2013] Assessing source extent using major
[Fri Jun 28 20:49:39 2013] Source does appear to be extended
[Fri Jun 28 20:49:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 28 20:51:19 2013] XMMSAS src. selection expression = ellipse(33695.204559, 30531.997345, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 28 20:51:19 2013] Writing source region out to fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_src.reg
[Fri Jun 28 20:51:19 2013] Extracting stamp from image fullrun_pn_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (313, 276) - (463, 426)
[Fri Jun 28 20:51:19 2013] XMMSAS bgd. selection expression = annulus(33695.204559, 30531.997345, 2175.000000, 4350.000000, X, Y) && !ellipse(27822.450600, 42978.201820, 8773.992252, 5304.984153, 56.196800, X, Y) && !ellipse(28223.130000, 35707.438200, 8806.224253, 6216.096179, 345.943100, X, Y) && !ellipse(22036.250980, 43029.497220, 11773.776339, 10466.160301, 62.305700, X, Y) && !ellipse(21578.114000, 42663.314000, 12823.392369, 12823.392369, 0.000000, X, Y) && !ellipse(25126.906000, 41626.240000, 10648.200306, 10648.200306, 0.000000, X, Y) && !ellipse(23457.841600, 41119.924000, 6270.912180, 5340.624154, 65.906600, X, Y) && !ellipse(25172.606000, 39788.054000, 5890.056169, 5890.056169, 0.000000, X, Y) && !ellipse(21596.706000, 38566.890000, 10251.384295, 6295.776181, 342.466700, X, Y) && !ellipse(25296.558000, 39334.580000, 10850.616312, 6709.896193, 81.285150, X, Y) && !ellipse(24217.651000, 38556.288000, 5708.688164, 5708.688164, 0.000000, X, Y) && !ellipse(25745.626400, 38755.194000, 5724.360165, 5126.256148, 49.268000, X, Y) && !ellipse(33427.064800, 39200.129860, 6134.496177, 2328.501667, 39.666800, X, Y) && !ellipse(25696.194000, 37671.426000, 5303.376153, 5303.376153, 0.000000, X, Y) && !ellipse(32353.494800, 37620.034000, 7813.968225, 4443.096128, 93.941180, X, Y) && !ellipse(31371.458000, 36451.210000, 1861.192054, 1573.264045, 357.948370, X, Y) && !ellipse(28762.372000, 35567.898000, 1670.400048, 937.744027, 35.629400, X, Y) && !ellipse(32866.171800, 36462.488000, 11642.640335, 7114.464205, 19.872200, X, Y) && !ellipse(25945.302000, 36413.256000, 5096.568147, 5096.568147, 0.000000, X, Y) && !ellipse(31643.424469, 35541.679199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.336200, 35510.866800, 1805.752052, 490.492814, 24.073500, X, Y) && !ellipse(34364.494965, 35634.737976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31006.052000, 35581.852140, 1775.336051, 698.167220, 356.230060, X, Y) && !ellipse(29533.531097, 34837.254791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27765.996000, 35634.068800, 10009.584288, 6027.432173, 193.928000, X, Y) && !ellipse(36527.555298, 34745.305817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34660.363464, 34056.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.906372, 33948.720032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32946.600464, 33365.200348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31481.616364, 33512.902283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33993.005920, 32936.280365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29139.099200, 33493.913000, 1578.664045, 684.504820, 357.528120, X, Y) && !ellipse(31878.702545, 32781.439056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.374359, 32631.575928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33360.118622, 33017.739319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29782.517090, 32428.243164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28749.224823, 33105.851776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31599.526215, 32039.899994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32657.518219, 32150.192566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37623.662903, 31717.935211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29414.654816, 31213.638947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37533.673340, 31086.115234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29959.846497, 29251.381134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33898.728485, 29599.171387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31554.547363, 30574.573395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30419.517029, 28917.620056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29267.786560, 28182.426514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36419.145142, 27949.259186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30674.705170, 27916.177521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30350.037567, 26999.486176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.969574, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31941.196625, 26661.641663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25071.778000, 36083.494000, 10725.648309, 7805.928225, 11.117800, X, Y) && !ellipse(29426.185608, 30372.236267, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 28 20:51:19 2013] Writing fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178.gif
[Sat Jun 29 05:13:35 2013] Mean detx,y = (7630.71, 2968.41) 
[Sat Jun 29 05:13:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 05:14:12 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 05:14:12 2013] Setting source spectrum file to fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_src_b10.pi.gz
[Sat Jun 29 05:14:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_bgd.pi.gz
[Sat Jun 29 15:21:42 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 29 15:21:42 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:34:58 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:34:58 2013] Total counts from fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_src_b10.pi.gz = 23837.00
[Sun Jun 30 14:34:59 2013] Total counts from fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_bgd.pi.gz = 24775.00
[Sun Jun 30 14:34:59 2013] Got source and background scale factors 4274695.000000, 8718664.000000
[Sun Jun 30 14:34:59 2013] User source parameters:
  Position = (387.9, 351.5) = 8 22 45.30 -43 18 58.4
  Extent = 21.7" x 21.7", rotation angle = 0
  Source aperture counts = 11690.0 +/- 155.4
  Background aperture counts = 12147.0
  Rate = 0.3 +/- 0.004

[Sun Jun 30 14:34:59 2013] Updating counts from extracted products
[Sun Jun 30 14:34:59 2013] Set source signif. to 11690.00/110.21 = 106.07
[Sun Jun 30 14:35:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:35:13 2013] Using photon index=1.80, rate=0.282, arf fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178.arf
[Sun Jun 30 14:35:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:35:13 2013] Updating source flux to 2.3e-12
[Sun Jun 30 14:39:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:40:10 2013] xmm0690970201/analysis//spectral/fullrun_pn_xmm0690970201_pi300-10000_pass1_cl_src178_pl.csv not found, spectral fit skipped or did not complete