[Mon Jun 24 22:24:45 2013] Detection parameters:
  Position = (199.6, 480.7) = 8 24 0.21 -43 9 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2400.3 +/- 89.4
  Background counts = 614.9
  Rate = 0.06 +/- 0.002

[Mon Jun 24 22:25:01 2013] Off-axis axis estimate = 15.03'
[Wed Jun 26 03:29:18 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 03:29:18 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Wed Jun 26 03:29:18 2013] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.692
[Wed Jun 26 03:29:18 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 13.94"
[Wed Jun 26 11:54:23 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19.ximg exists
[Wed Jun 26 11:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19.csv
[Wed Jun 26 11:54:23 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Jun 26 11:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19.csv
[Wed Jun 26 11:54:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 11:54:26 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Jun 26 11:54:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 26 11:54:26 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Jun 26 11:54:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Jun 26 11:54:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 11:55:18 2013] Spatial fit model total counts = -9.506160, observed total counts = 30305.000000
[Wed Jun 26 11:55:18 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 26 11:55:18 2013] Source 5 is offset by 2.170637 and 2.356004 pixels which is larger than
2 X fitted extent = 1.972800 x 12.994621, not incorporating fit results
[Wed Jun 26 11:55:18 2013] Warning, spatial fit 19 centroid is now closest to src. 8
[Wed Jun 26 11:55:18 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:18 2013] Assessing source extent using major
[Wed Jun 26 11:55:18 2013] Source does appear to be extended
[Wed Jun 26 11:55:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 11:55:19 2013] Source is confused with source 12
[Fri Jun 28 10:45:33 2013] Using EEF radius (= 13.94 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 10:45:33 2013] Initial guess for spatial extent in simple fitting = 13.94"
[Fri Jun 28 10:45:33 2013] source mask rpix=3.2, npix_max = 54, mask sum = 38, frac = 0.692
[Fri Jun 28 10:45:33 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 13.94"
[Fri Jun 28 20:49:15 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jun 28 20:49:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19.csv
[Fri Jun 28 20:49:15 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jun 28 20:49:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19.csv
[Fri Jun 28 20:49:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:49:16 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jun 28 20:49:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 28 20:49:16 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jun 28 20:49:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri Jun 28 20:49:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:50:10 2013] Warning, spatial fit 19 centroid is now closest to src. 6
[Fri Jun 28 20:50:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:50:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:50:10 2013] Assessing source extent using major
[Fri Jun 28 20:50:10 2013] Source does appear to be extended
[Fri Jun 28 20:50:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 06:21:15 2013] Counts = 2400.257324, rescaling region sizes by 2.000000
[Sun Jun 30 06:21:15 2013] XMMSAS src. selection expression = ellipse(17320.291458, 41772.568329, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 30 06:21:15 2013] Writing source region out to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 30 06:21:15 2013] Extracting stamp from image fullrun_mos2_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (125, 406) - (275, 556)
[Sun Jun 30 06:21:15 2013] XMMSAS bgd. selection expression = annulus(17320.291458, 41772.568329, 4350.000000, 8700.000000, X, Y) && !ellipse(15712.323410, 41117.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16145.443649, 40724.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.657600, 39285.200800, 1908.104055, 1012.168029, 66.779200, X, Y) && !ellipse(16974.793823, 42097.204071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21608.612200, 35124.267600, 2623.432075, 1491.128043, 345.827800, X, Y) && !ellipse(20366.312000, 34845.278000, 1771.496051, 915.360026, 51.319500, X, Y) && !ellipse(17936.802536, 42228.012054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21147.266800, 33959.394200, 1658.912048, 565.765616, 311.914700, X, Y) && !ellipse(14857.804000, 39704.582000, 3218.176093, 1599.512046, 90.000000, X, Y) && !ellipse(25115.838470, 39883.679596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.548233, 34912.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.529892, 34888.348175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16754.180801, 40573.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15013.115400, 39095.906000, 2181.912063, 980.952028, 47.873700, X, Y) && !ellipse(21897.817400, 42698.050600, 1945.936056, 1100.624032, 329.697700, X, Y) && !ellipse(19936.307200, 33960.965400, 2291.600066, 973.368028, 125.549000, X, Y) && !ellipse(26045.134000, 38088.324000, 1849.816053, 1849.816053, 0.000000, X, Y) && !ellipse(16210.180000, 38549.860000, 1527.696044, 786.374423, 53.236900, X, Y) && !ellipse(21285.102200, 33014.986000, 2224.184064, 2224.184064, 0.000000, X, Y) && !ellipse(27777.884000, 43177.782000, 2123.592061, 773.988822, 65.599900, X, Y) && !ellipse(15230.496000, 38942.584000, 2136.816061, 2136.816061, 0.000000, X, Y) && !ellipse(19847.223557, 39276.453156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19941.931107, 35323.077362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20615.194763, 33481.397705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.927521, 33795.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.991000, 37160.428000, 1409.416041, 588.390417, 309.292000, X, Y) && !ellipse(18591.340000, 41810.132000, 2153.592062, 1142.824033, 313.770600, X, Y) && !ellipse(21852.218048, 32530.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.718048, 43364.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.778000, 36337.812000, 1204.312035, 662.260819, 337.632800, X, Y) && !ellipse(19186.922800, 38623.048000, 1996.464057, 610.107218, 319.666400, X, Y) && !ellipse(26416.178000, 32097.492200, 1437.160041, 1158.080033, 52.007900, X, Y) && !ellipse(19590.972076, 37294.707428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.672058, 36387.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18269.805603, 38832.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26806.038086, 36437.090485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.526000, 37125.928000, 3278.192094, 1176.088034, 40.762600, X, Y) && !ellipse(18205.770279, 41799.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.872000, 32152.078000, 1482.824043, 864.464025, 46.367700, X, Y) && !ellipse(18103.128174, 39310.588867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22466.924000, 33188.226000, 1612.016046, 532.333615, 141.759000, X, Y) && !ellipse(21535.381454, 33528.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18073.662000, 36784.804000, 1862.648054, 1862.648054, 0.000000, X, Y) && !ellipse(24872.420074, 36842.149719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21043.096000, 44005.164000, 1945.496056, 1458.696042, 212.010000, X, Y) && !ellipse(23304.179230, 39268.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20392.093979, 43665.251099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19411.726400, 35227.632000, 1765.000051, 1765.000051, 0.000000, X, Y) && !ellipse(19139.639664, 42657.070099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.074814, 43543.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23396.664520, 36431.541473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19539.818000, 40929.636000, 10617.600306, 6655.872192, 129.915000, X, Y) && !ellipse(26036.098175, 37525.620636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21386.811325, 32267.568756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19827.674576, 39824.732635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17243.166000, 39053.917400, 1220.664035, 950.448027, 327.923400, X, Y) && !ellipse(14764.824432, 38244.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22298.979828, 44187.776794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20932.614000, 42191.504000, 3242.384093, 1427.904041, 320.246600, X, Y) && !ellipse(20200.786000, 42483.198000, 2153.592062, 2153.592062, 0.000000, X, Y) && !ellipse(19160.079407, 41379.634613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18323.023800, 36330.023000, 1228.528035, 885.368025, 41.068100, X, Y) && !ellipse(25698.946000, 33140.454000, 1022.248029, 1022.248029, 0.000000, X, Y) && !ellipse(18019.172165, 40220.329346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.724075, 37434.197357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.135071, 37492.451355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.906000, 30845.594000, 2595.240075, 1406.552040, 145.602700, X, Y) && !ellipse(26090.932495, 41638.069855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19954.071228, 43191.774414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19715.904480, 36856.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.151001, 41627.911713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16477.614365, 33249.892426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20594.188171, 42830.039948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16557.167007, 33894.233521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18594.997574, 41176.349640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.863220, 42839.571503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.313110, 39875.895050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.094452, 42025.746613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18248.970261, 35278.587036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15304.056900, 37115.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24028.229614, 40201.794586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.616821, 41267.852570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17235.939850, 34415.142303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22387.474609, 38841.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.924000, 37358.260000, 1749.472050, 523.248815, 317.753998, X, Y) && !ellipse(15954.241714, 33967.591980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16385.864517, 37728.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16533.055359, 34803.644775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21654.913528, 38839.708801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17564.623184, 33803.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15430.315491, 36413.904114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15802.497498, 34401.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17378.286591, 33162.568512, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 06:21:15 2013] Writing fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5.gif
[Sun Jun 30 07:10:06 2013] Mean detx,y = (-2294.91, 15824.09) 
[Sun Jun 30 07:10:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 07:10:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 07:10:47 2013] Setting source spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 30 07:10:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 30 11:11:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 11:11:09 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:36:39 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:36:39 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 37330.00
[Sun Jun 30 14:36:39 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 9343.00
[Sun Jun 30 14:36:39 2013] Got source and background scale factors 3233312.000000, 10645813.000000
[Sun Jun 30 14:36:39 2013] User source parameters:
  Position = (199.6, 480.7) = 8 24 0.21 -43 9 26.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34492.4 +/- 194.2
  Background aperture counts = 2837.6
  Rate = 0.8 +/- 0.005

[Sun Jun 30 14:36:39 2013] Updating counts from extracted products
[Sun Jun 30 14:36:39 2013] Set source signif. to 34492.37/53.27 = 647.51
[Sun Jun 30 14:37:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:37:38 2013] Using photon index=1.80, rate=0.834, arf fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5.arf
[Sun Jun 30 14:37:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:37:38 2013] Updating source flux to 4e-11
[Sun Jun 30 14:38:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:39:18 2013] xmm0690970201/analysis//spectral/fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete