[Mon Jun 24 22:24:53 2013] Detection parameters:
  Position = (237.5, 385.4) = 8 23 45.20 -43 16 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 901.2 +/- 46.8
  Background counts = 517.0
  Rate = 0.04 +/- 0.002

[Mon Jun 24 22:25:01 2013] Off-axis axis estimate = 7.70'
[Wed Jun 26 03:29:18 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 03:29:18 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Wed Jun 26 03:29:18 2013] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.671
[Wed Jun 26 03:29:18 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 10.28"
[Wed Jun 26 11:54:23 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37.ximg exists
[Wed Jun 26 11:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37.csv
[Wed Jun 26 11:54:23 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Jun 26 11:54:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37.csv
[Wed Jun 26 11:54:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 11:54:26 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Jun 26 11:54:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed Jun 26 11:54:26 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Jun 26 11:54:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Wed Jun 26 11:54:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 11:55:18 2013] Warning, spatial fit 37 centroid is now closest to src. 190
[Wed Jun 26 11:55:18 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:18 2013] Assessing source extent using major
[Wed Jun 26 11:55:18 2013] Source does appear to be extended
[Wed Jun 26 11:55:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 11:55:19 2013] Source is confused with source 164
[Fri Jun 28 10:45:33 2013] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 10:45:33 2013] Initial guess for spatial extent in simple fitting = 10.28"
[Fri Jun 28 10:45:33 2013] source mask rpix=2.4, npix_max = 32, mask sum = 22, frac = 0.671
[Fri Jun 28 10:45:33 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 10.28"
[Fri Jun 28 20:49:15 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jun 28 20:49:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37.csv
[Fri Jun 28 20:49:15 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jun 28 20:49:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37.csv
[Fri Jun 28 20:49:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:49:17 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jun 28 20:49:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jun 28 20:49:17 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jun 28 20:49:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jun 28 20:49:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:50:10 2013] Warning, spatial fit 37 centroid is now closest to src. 157
[Fri Jun 28 20:50:10 2013] Spatial fit model total counts = 1988.160000, observed total counts = 5724.000000
[Fri Jun 28 20:50:10 2013] Poor agreement between spatial fit and data for source 179
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 28 20:50:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:50:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:50:10 2013] Assessing source extent using major
[Fri Jun 28 20:50:10 2013] Source does appear to be extended
[Fri Jun 28 20:50:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 30 06:21:19 2013] XMMSAS src. selection expression = ellipse(20615.194763, 33481.397705, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 30 06:21:19 2013] Writing source region out to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_src.reg
[Sun Jun 30 06:21:19 2013] Extracting stamp from image fullrun_mos2_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (200, 348) - (275, 423)
[Sun Jun 30 06:21:19 2013] XMMSAS bgd. selection expression = annulus(20615.194763, 33481.397705, 1087.500000, 2175.000000, X, Y) && !ellipse(21608.612200, 35124.267600, 2623.432075, 1491.128043, 345.827800, X, Y) && !ellipse(20366.312000, 34845.278000, 1771.496051, 915.360026, 51.319500, X, Y) && !ellipse(21147.266800, 33959.394200, 1658.912048, 565.765616, 311.914700, X, Y) && !ellipse(22020.548233, 34912.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19472.529892, 34888.348175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19936.307200, 33960.965400, 2291.600066, 973.368028, 125.549000, X, Y) && !ellipse(21285.102200, 33014.986000, 2224.184064, 2224.184064, 0.000000, X, Y) && !ellipse(19941.931107, 35323.077362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.927521, 33795.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21852.218048, 32530.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.672058, 36387.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.526000, 37125.928000, 3278.192094, 1176.088034, 40.762600, X, Y) && !ellipse(22466.924000, 33188.226000, 1612.016046, 532.333615, 141.759000, X, Y) && !ellipse(21535.381454, 33528.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18073.662000, 36784.804000, 1862.648054, 1862.648054, 0.000000, X, Y) && !ellipse(19411.726400, 35227.632000, 1765.000051, 1765.000051, 0.000000, X, Y) && !ellipse(23396.664520, 36431.541473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.254883, 32182.337006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19539.818000, 40929.636000, 10617.600306, 6655.872192, 129.915000, X, Y) && !ellipse(21386.811325, 32267.568756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18323.023800, 36330.023000, 1228.528035, 885.368025, 41.068100, X, Y) && !ellipse(22152.645233, 30750.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18248.970261, 35278.587036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.924000, 37358.260000, 1749.472050, 523.248815, 317.753998, X, Y)
[Sun Jun 30 06:21:19 2013] Writing fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179.gif
[Sun Jun 30 08:02:03 2013] Mean detx,y = (366.37, 7615.26) 
[Sun Jun 30 08:02:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 08:02:19 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 08:02:19 2013] Setting source spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_src_b10.pi.gz
[Sun Jun 30 08:02:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_bgd.pi.gz
[Sun Jun 30 12:02:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 12:02:48 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:36:45 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:36:45 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_src_b10.pi.gz = 6293.00
[Sun Jun 30 14:36:45 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_bgd.pi.gz = 765.00
[Sun Jun 30 14:36:45 2013] Got source and background scale factors 1017844.000000, 477180.000000
[Sun Jun 30 14:36:45 2013] User source parameters:
  Position = (237.5, 385.4) = 8 23 45.20 -43 16 22.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4661.2 +/- 80.3
  Background aperture counts = 1631.8
  Rate = 0.1 +/- 0.002

[Sun Jun 30 14:36:45 2013] Updating counts from extracted products
[Sun Jun 30 14:36:45 2013] Set source signif. to 4661.22/40.40 = 115.39
[Sun Jun 30 14:37:39 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:37:39 2013] Using photon index=1.80, rate=0.113, arf fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179.arf
[Sun Jun 30 14:37:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:37:39 2013] Updating source flux to 3.3e-12
[Sun Jun 30 14:38:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:39:18 2013] xmm0690970201/analysis//spectral/fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src179_pl.csv not found, spectral fit skipped or did not complete