[Mon Jun 24 22:24:51 2013] Detection parameters:
  Position = (249.0, 405.1) = 8 23 40.61 -43 15 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1880.3 +/- 88.5
  Background counts = 742.9
  Rate = 0.08 +/- 0.004

[Mon Jun 24 22:25:01 2013] Off-axis axis estimate = 8.53'
[Wed Jun 26 03:29:18 2013] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Wed Jun 26 03:29:18 2013] Initial guess for spatial extent in simple fitting = 10.69"
[Wed Jun 26 03:29:18 2013] source mask rpix=2.5, npix_max = 34, mask sum = 32, frac = 0.914
[Wed Jun 26 03:29:18 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.69"
[Wed Jun 26 11:54:22 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 26 11:54:22 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 26 11:54:22 2013] Fit fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_src6 appears to have run properly
[Wed Jun 26 11:54:25 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 26 11:54:25 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 26 11:54:25 2013] Fit fullrun_mos2_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jun 26 11:55:18 2013] Spatial fit model total counts = 14549.800000, observed total counts = 14484.000000
[Wed Jun 26 11:55:18 2013] Offset between fit and detection position for source 138 = 1.158652 pixels
[Wed Jun 26 11:55:18 2013] 14286.680000 total counts/ 11872.500000 bgd. counts: snr = 22.156367
Spatial fit parameters:
  Offset between fit and detection position for source 138 = 1.158652 pixels
  Position = (248.1, 405.9) = 8 23 40.97 -43 14 55.7
  Extent = 21.4 (18.1-42.8)" x 11.4 (10.1-13.1)", rotation angle = 7 (359-23) degrees
  Source counts = 2414.2 +/- 119.5
  Background counts = 11872.5
  Rate = 0.06 +/- 0.003
[Wed Jun 26 11:55:18 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:18 2013] Assessing source extent using major axis lower bound
[Wed Jun 26 11:55:18 2013] Source does appear to be extended
[Wed Jun 26 11:55:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.38
[Wed Jun 26 11:55:19 2013] Source is confused with source 154
[Wed Jun 26 11:55:19 2013] Source is confused with source 152
[Fri Jun 28 10:45:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 28 10:45:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 28 10:45:33 2013] Initial guess for spatial extent in simple fitting = 16.40"
[Fri Jun 28 10:45:33 2013] source mask rpix=3.8, npix_max = 72, mask sum = 60, frac = 0.823
[Fri Jun 28 10:45:33 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 16.40"
[Fri Jun 28 20:49:14 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 28 20:49:14 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 28 20:49:14 2013] Fit fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Jun 28 20:49:16 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 28 20:49:16 2013] fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 28 20:49:16 2013] Fit fullrun_mos2_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 28 20:50:09 2013] Spatial fit model total counts = 26331.500000, observed total counts = 26093.000000
[Fri Jun 28 20:50:09 2013] Offset between fit and detection position for source 138 = 1.789581 pixels
[Fri Jun 28 20:50:09 2013] 25827.000000 total counts/ 18679.900000 bgd. counts: snr = 52.292883
Spatial fit parameters:
  Offset between fit and detection position for source 138 = 1.789581 pixels
  Position = (248.9, 404.3) = 8 23 40.65 -43 15 2.7
  Extent = 32.8 (32.3-65.6)" x 18.6 (17.5-19.9)", rotation angle = 346 (342-350) degrees
  Source counts = 7147.1 +/- 160.7
  Background counts = 18679.9
  Rate = 0.2 +/- 0.004
[Fri Jun 28 20:50:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:50:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:50:10 2013] Assessing source extent using major axis lower bound
[Fri Jun 28 20:50:10 2013] Source does appear to be extended
[Fri Jun 28 20:50:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.62
[Fri Jun 28 20:50:10 2013] Source is asymmetric
[Sun Jun 30 06:21:12 2013] Counts = 7147.100000, rescaling region sizes by 2.000000
[Sun Jun 30 06:21:12 2013] XMMSAS src. selection expression = ellipse(21608.612200, 35124.267600, 3935.148113, 2236.692064, 345.827800, X, Y)
[Sun Jun 30 06:21:12 2013] Writing source region out to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_src.reg
[Sun Jun 30 06:21:12 2013] Extracting stamp from image fullrun_mos2_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (23, 178) - (475, 595)
[Sun Jun 30 06:21:12 2013] XMMSAS bgd. selection expression = annulus(21608.612200, 35124.267600, 13117.160377, 26234.320755, X, Y) && !ellipse(15712.323410, 41117.535431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16145.443649, 40724.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28261.673828, 35900.774567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25481.657600, 39285.200800, 1908.104055, 1012.168029, 66.779200, X, Y) && !ellipse(16974.793823, 42097.204071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20366.312000, 34845.278000, 1771.496051, 915.360026, 51.319500, X, Y) && !ellipse(17936.802536, 42228.012054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30518.570862, 33948.632416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21147.266800, 33959.394200, 1658.912048, 565.765616, 311.914700, X, Y) && !ellipse(14857.804000, 39704.582000, 3218.176093, 1599.512046, 90.000000, X, Y) && !ellipse(29473.576000, 36233.614000, 1740.952050, 719.649621, 137.460900, X, Y) && !ellipse(25115.838470, 39883.679596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.548233, 34912.694794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.434967, 36037.758148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28775.014000, 35768.488000, 2452.272071, 1496.760043, 136.004000, X, Y) && !ellipse(19472.529892, 34888.348175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16754.180801, 40573.833221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17320.291458, 41772.568329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15013.115400, 39095.906000, 2181.912063, 980.952028, 47.873700, X, Y) && !ellipse(21897.817400, 42698.050600, 1945.936056, 1100.624032, 329.697700, X, Y) && !ellipse(27900.313721, 36279.442810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19936.307200, 33960.965400, 2291.600066, 973.368028, 125.549000, X, Y) && !ellipse(30040.655600, 36815.006000, 1832.104053, 418.579212, 321.632100, X, Y) && !ellipse(26045.134000, 38088.324000, 1849.816053, 1849.816053, 0.000000, X, Y) && !ellipse(16210.180000, 38549.860000, 1527.696044, 786.374423, 53.236900, X, Y) && !ellipse(28301.418000, 36443.124600, 1749.920050, 473.180814, 354.638740, X, Y) && !ellipse(21285.102200, 33014.986000, 2224.184064, 2224.184064, 0.000000, X, Y) && !ellipse(27777.884000, 43177.782000, 2123.592061, 773.988822, 65.599900, X, Y) && !ellipse(33455.986000, 39213.653000, 2045.504059, 864.080025, 33.529800, X, Y) && !ellipse(26943.242035, 35621.892944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15230.496000, 38942.584000, 2136.816061, 2136.816061, 0.000000, X, Y) && !ellipse(32851.784000, 41579.790200, 2195.040063, 1717.888049, 325.892600, X, Y) && !ellipse(19847.223557, 39276.453156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19941.931107, 35323.077362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30114.264000, 37176.190000, 1857.280053, 1857.280053, 0.000000, X, Y) && !ellipse(20615.194763, 33481.397705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22108.927521, 33795.936371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25979.991000, 37160.428000, 1409.416041, 588.390417, 309.292000, X, Y) && !ellipse(18591.340000, 41810.132000, 2153.592062, 1142.824033, 313.770600, X, Y) && !ellipse(21852.218048, 32530.167084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19459.718048, 43364.672577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.778000, 36337.812000, 1204.312035, 662.260819, 337.632800, X, Y) && !ellipse(19186.922800, 38623.048000, 1996.464057, 610.107218, 319.666400, X, Y) && !ellipse(26416.178000, 32097.492200, 1437.160041, 1158.080033, 52.007900, X, Y) && !ellipse(19590.972076, 37294.707428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33726.953400, 39017.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19068.672058, 36387.144073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18269.805603, 38832.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26806.038086, 36437.090485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.526000, 37125.928000, 3278.192094, 1176.088034, 40.762600, X, Y) && !ellipse(18205.770279, 41799.323059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.872000, 32152.078000, 1482.824043, 864.464025, 46.367700, X, Y) && !ellipse(31512.734000, 30392.608000, 1282.144037, 1282.144037, 0.000000, X, Y) && !ellipse(18103.128174, 39310.588867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33145.334000, 41594.752000, 2214.056064, 1749.040050, 150.352000, X, Y) && !ellipse(22466.924000, 33188.226000, 1612.016046, 532.333615, 141.759000, X, Y) && !ellipse(21535.381454, 33528.203217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18073.662000, 36784.804000, 1862.648054, 1862.648054, 0.000000, X, Y) && !ellipse(24872.420074, 36842.149719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30491.368000, 37451.670000, 2250.680065, 2250.680065, 0.000000, X, Y) && !ellipse(21043.096000, 44005.164000, 1945.496056, 1458.696042, 212.010000, X, Y) && !ellipse(23304.179230, 39268.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.931915, 35855.670929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31512.930200, 30705.172400, 1508.048043, 1127.544032, 111.686600, X, Y) && !ellipse(32646.502502, 38231.598236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20392.093979, 43665.251099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19411.726400, 35227.632000, 1765.000051, 1765.000051, 0.000000, X, Y) && !ellipse(32841.373688, 40840.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19139.639664, 42657.070099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30438.086304, 35868.231873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21702.074814, 43543.488800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23396.664520, 36431.541473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22528.254883, 32182.337006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41136.848114, 35015.938263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19539.818000, 40929.636000, 10617.600306, 6655.872192, 129.915000, X, Y) && !ellipse(26036.098175, 37525.620636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35525.263153, 41535.806091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32472.846520, 30898.501400, 1030.344030, 386.803211, 302.467000, X, Y) && !ellipse(21386.811325, 32267.568756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32494.422800, 37878.260000, 1964.264057, 1323.496038, 308.339300, X, Y) && !ellipse(19827.674576, 39824.732635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17243.166000, 39053.917400, 1220.664035, 950.448027, 327.923400, X, Y) && !ellipse(27075.958800, 33362.559140, 743.684821, 743.684821, 0.000000, X, Y) && !ellipse(27397.538788, 37122.680115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33330.197600, 36112.453380, 729.029621, 574.088817, 40.915400, X, Y) && !ellipse(33115.704800, 33286.320000, 1714.256049, 728.912021, 215.557007, X, Y) && !ellipse(14764.824432, 38244.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22298.979828, 44187.776794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20932.614000, 42191.504000, 3242.384093, 1427.904041, 320.246600, X, Y) && !ellipse(34763.981293, 35445.896362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32161.346344, 30059.771179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.086000, 31127.310000, 1508.048043, 1508.048043, 0.000000, X, Y) && !ellipse(20200.786000, 42483.198000, 2153.592062, 2153.592062, 0.000000, X, Y) && !ellipse(28160.644653, 42186.630768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19160.079407, 41379.634613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32083.439819, 37983.164490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18323.023800, 36330.023000, 1228.528035, 885.368025, 41.068100, X, Y) && !ellipse(34090.262299, 41707.342224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26224.520294, 31183.265411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25698.946000, 33140.454000, 1022.248029, 1022.248029, 0.000000, X, Y) && !ellipse(18019.172165, 40220.329346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34227.535278, 27438.004089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16781.724075, 37434.197357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33650.241638, 42136.041840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.135071, 37492.451355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33353.536804, 33105.328735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26152.906000, 30845.594000, 2595.240075, 1406.552040, 145.602700, X, Y) && !ellipse(31310.000580, 36314.292725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31952.358368, 35957.990448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26090.932495, 41638.069855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19954.071228, 43191.774414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34790.730713, 34055.847809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.994476, 38083.421051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26198.426666, 30229.759430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34422.722412, 42053.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19715.904480, 36856.821411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23291.151001, 41627.911713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41538.628387, 34142.749573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31965.700600, 36651.652000, 1622.448047, 776.088822, 33.057000, X, Y) && !ellipse(22152.645233, 30750.792999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29384.825562, 33447.827515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25155.539124, 28204.096863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16477.614365, 33249.892426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20594.188171, 42830.039948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16557.167007, 33894.233521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28999.538330, 42412.358704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33977.731537, 29797.584381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17020.449707, 31258.389465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39142.751190, 37618.159027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31384.471497, 35785.758698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18594.997574, 41176.349640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.863220, 42839.571503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23395.313110, 39875.895050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.094452, 42025.746613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18248.970261, 35278.587036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31503.937195, 33167.047546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15304.056900, 37115.954926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30609.059570, 36401.574158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28839.466614, 37935.084564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41062.804657, 34578.325714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31205.048000, 35225.512000, 1757.376051, 1757.376051, 0.000000, X, Y) && !ellipse(24832.735352, 28211.538910, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33119.949982, 35362.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35062.311005, 41858.283295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31019.386000, 38191.184000, 1535.880044, 547.060016, 359.898000, X, Y) && !ellipse(24028.229614, 40201.794586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30968.904000, 35447.066000, 739.536021, 353.842410, 314.057800, X, Y) && !ellipse(25012.571106, 28843.884583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27886.143829, 16838.561615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37447.979614, 38689.728851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.151764, 32132.897705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37745.844696, 37888.095856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34368.766907, 38596.354126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24224.616821, 41267.852570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32364.987091, 36730.375641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17235.939850, 34415.142303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30182.138824, 42821.695190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31934.845795, 33508.680786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31107.727173, 32740.639221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22387.474609, 38841.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.924000, 37358.260000, 1749.472050, 523.248815, 317.753998, X, Y) && !ellipse(24277.783783, 28401.307129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29180.316620, 24775.556641, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(15954.241714, 33967.591980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23238.124756, 28512.640472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16385.864517, 37728.621521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20369.970947, 28404.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23715.578674, 28476.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34037.419250, 38349.242584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32402.544000, 39822.258000, 2125.488061, 1198.512034, 10.609800, X, Y) && !ellipse(25582.143921, 25952.677155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.851013, 37801.608276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22747.345245, 28141.677124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30650.703705, 23686.243256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35947.874786, 40941.552124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36423.387878, 27885.947357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30434.504669, 28920.046753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16533.055359, 34803.644775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31968.243408, 38946.618866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21654.913528, 38839.708801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18989.422089, 28048.039551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21880.520660, 28009.881470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32201.309845, 33103.810059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25657.655609, 29556.069641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32852.593842, 32301.728363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17564.623184, 33803.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20159.727142, 28995.290283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15430.315491, 36413.904114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15802.497498, 34401.336151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30551.100281, 27708.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35960.725128, 34406.577179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30475.907196, 28407.833191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22866.577301, 29013.328552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17378.286591, 33162.568512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36499.913788, 34660.857300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40534.406036, 36300.746765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39918.290558, 37186.955719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23192.808716, 27436.039368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33496.507477, 37789.894287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34272.992035, 36182.589996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.799377, 26745.415802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26097.434662, 25873.076721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42660.683594, 27700.097961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24754.839447, 27456.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29545.590240, 28411.898041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33205.245453, 37428.467804, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 30 06:21:12 2013] Writing fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138.gif
[Sun Jun 30 06:30:19 2013] Mean detx,y = (-1095.88, 8603.53) 
[Sun Jun 30 06:30:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 06:36:32 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 06:36:32 2013] Setting source spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_src_b10.pi.gz
[Sun Jun 30 06:36:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_bgd.pi.gz
[Sun Jun 30 14:36:34 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:36:34 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_src_b10.pi.gz = 128924.00
[Sun Jun 30 14:36:35 2013] Total counts from fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_bgd.pi.gz = 152656.00
[Sun Jun 30 14:36:35 2013] Got source and background scale factors 24080540.000000, 387553453.000000
[Sun Jun 30 14:36:35 2013] User source parameters:
  Position = (248.9, 404.3) = 8 23 40.65 -43 15 2.7
  Extent = 32.8 (32.3-65.6)" x 18.6 (17.5-19.9)", rotation angle = 346 (342-350) degrees
  Source aperture counts = 119438.8 +/- 360.1
  Background aperture counts = 9485.2
  Rate = 3 +/- 0.009

[Sun Jun 30 14:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:37:37 2013] Using photon index=1.80, rate=0.173, arf fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138.arf
[Sun Jun 30 14:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:37:37 2013] Updating source flux to 3.7e-12
[Sun Jun 30 14:38:37 2013] Flag c found in src. 138 procflags, skipping spectral fitting
[Sun Jun 30 14:39:18 2013] xmm0690970201/analysis//spectral/fullrun_mos2_xmm0690970201_pi300-10000_pass1_cl_src138_pl.csv not found, spectral fit skipped or did not complete