[Mon Jun 24 22:22:31 2013] Detection parameters:
  Position = (185.7, 477.9) = 8 24 5.76 -43 9 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4659.7 +/- 96.3
  Background counts = 411.7
  Rate = 0.1 +/- 0.002

[Mon Jun 24 22:22:45 2013] Off-axis axis estimate = 15.37'
[Tue Jun 25 15:34:11 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 15:34:11 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Tue Jun 25 15:34:11 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.874
[Tue Jun 25 15:34:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 14.11"
[Wed Jun 26 03:29:13 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 26 03:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5.csv
[Wed Jun 26 03:29:13 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 26 03:29:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5.csv
[Wed Jun 26 03:29:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 03:29:16 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 26 03:29:16 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 26 03:29:16 2013] Fit fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 26 11:55:03 2013] Source 5 is offset by -7.339775 and -4.524975 pixels which is larger than
2 X fitted extent = 4.894207 x 4.894207, not incorporating fit results
[Wed Jun 26 11:55:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:04 2013] Assessing source extent using major
[Wed Jun 26 11:55:04 2013] Source does appear to be extended
[Wed Jun 26 11:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 28 01:18:00 2013] Using EEF radius (= 14.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 01:18:00 2013] Initial guess for spatial extent in simple fitting = 14.11"
[Fri Jun 28 01:18:00 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.874
[Fri Jun 28 01:18:00 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 14.11"
[Fri Jun 28 10:45:30 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 28 10:45:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4.csv
[Fri Jun 28 10:45:30 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 28 10:45:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4.csv
[Fri Jun 28 10:45:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 10:45:32 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 28 10:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 28 10:45:32 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 28 10:45:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 28 10:45:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:49:54 2013] Warning, spatial fit 4 centroid is now closest to src. 8
[Fri Jun 28 20:49:55 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:49:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:49:55 2013] Assessing source extent using major
[Fri Jun 28 20:49:55 2013] Source does appear to be extended
[Fri Jun 28 20:49:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 23:27:10 2013] Counts = 4659.722168, rescaling region sizes by 2.000000
[Sat Jun 29 23:27:10 2013] XMMSAS src. selection expression = ellipse(16106.677567, 41530.541168, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 29 23:27:10 2013] Writing source region out to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 29 23:27:10 2013] Extracting stamp from image fullrun_mos1_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (111, 403) - (261, 553)
[Sat Jun 29 23:27:10 2013] XMMSAS bgd. selection expression = annulus(16106.677567, 41530.541168, 4350.000000, 8700.000000, X, Y) && !ellipse(15868.921021, 40847.319824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17473.981812, 42392.639801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14714.924000, 40222.904000, 6713.664193, 4381.320126, 138.868500, X, Y) && !ellipse(25548.467529, 39012.283051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21728.570000, 35002.962000, 1704.416049, 1454.600042, 143.417300, X, Y) && !ellipse(20288.306000, 34701.386000, 1667.592048, 751.415222, 84.980960, X, Y) && !ellipse(14913.978668, 39189.410675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24260.709290, 38928.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.648132, 39986.445160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19667.052000, 35208.572000, 2417.304070, 1509.944043, 35.767100, X, Y) && !ellipse(24612.264374, 38574.410309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20354.083252, 35191.865814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23288.718994, 39355.692505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17547.247345, 40679.529938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21162.266000, 33667.934000, 1647.808047, 487.420814, 49.226600, X, Y) && !ellipse(19867.711090, 39363.238098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20222.571686, 34233.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.848389, 37978.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21263.017000, 33509.440000, 2304.960066, 596.332017, 228.813000, X, Y) && !ellipse(19088.783800, 38950.762800, 9659.136278, 3965.208114, 340.413000, X, Y) && !ellipse(20658.706000, 33953.762000, 3313.760095, 3313.760095, 0.000000, X, Y) && !ellipse(21476.114563, 34074.472839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.326050, 39882.405182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25691.484000, 36684.204000, 1724.632050, 696.680020, 313.050500, X, Y) && !ellipse(19648.214508, 37447.852173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19369.088623, 43345.131561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22503.677277, 32830.533203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22302.118073, 35387.355621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19182.540955, 36313.485596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18635.118600, 36381.417400, 1880.912054, 814.264023, 19.614700, X, Y) && !ellipse(19140.040000, 32372.794000, 1656.880048, 1656.880048, 0.000000, X, Y) && !ellipse(14867.145279, 38326.958923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20096.218000, 41760.967000, 2147.112062, 1177.160034, 129.301800, X, Y) && !ellipse(20356.794000, 43510.696000, 1870.888054, 1870.888054, 0.000000, X, Y) && !ellipse(25182.901855, 37616.470428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15192.816483, 37628.975616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22951.925873, 36708.121185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21484.000000, 38838.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26299.451260, 41862.006400, 2093.296060, 1249.064036, 129.429300, X, Y) && !ellipse(25422.603210, 33197.447632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21431.618927, 37528.727020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22785.478000, 35728.134000, 1445.760042, 510.010415, 359.313504, X, Y) && !ellipse(23002.284000, 32857.960400, 1523.008044, 1196.208034, 143.445100, X, Y) && !ellipse(21267.114000, 42304.506000, 3324.272096, 2339.176067, 356.296760, X, Y) && !ellipse(19450.967072, 37099.156555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16911.706345, 37615.132294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25396.254700, 36343.474152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20129.636368, 42235.401001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20913.614746, 42227.507599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17974.197296, 39437.472717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19017.574692, 39528.075592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17233.448000, 37213.926000, 2012.776058, 2012.776058, 0.000000, X, Y) && !ellipse(20984.099136, 37904.068512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16675.990189, 34062.695129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19423.727798, 36489.086578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16320.201660, 37710.779724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18332.116000, 38762.128000, 2074.000060, 1693.928049, 197.253000, X, Y) && !ellipse(26091.872400, 31050.065400, 2076.632060, 683.399220, 313.510300, X, Y) && !ellipse(21081.366135, 36133.939240, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23461.518000, 36762.072000, 1747.328050, 859.872025, 338.151800, X, Y) && !ellipse(21246.881989, 38727.570984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26680.256000, 44585.493400, 2269.720065, 835.704024, 2.082000, X, Y) && !ellipse(23315.229462, 41361.476868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24262.939514, 37097.452026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19805.951126, 40488.152771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21433.765518, 37015.799255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.257538, 37629.649994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16234.976547, 32049.965210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17764.692917, 32686.330597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17978.962000, 39890.598000, 1920.592055, 558.012016, 321.658300, X, Y) && !ellipse(15818.921509, 34152.557251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16519.936859, 33352.071228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16870.737915, 32034.074860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15474.531021, 36440.281830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16634.373932, 34726.569275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15731.337402, 33443.300690, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 23:27:10 2013] Writing fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5.gif
[Sat Jun 29 23:39:17 2013] Mean detx,y = (16424.96, 1146.28) 
[Sat Jun 29 23:39:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 23:39:56 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 23:39:56 2013] Setting source spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 29 23:39:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 30 03:27:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 03:27:38 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:35:15 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:35:16 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 50788.00
[Sun Jun 30 14:35:16 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 9348.00
[Sun Jun 30 14:35:16 2013] Got source and background scale factors 3083539.000000, 11118905.000000
[Sun Jun 30 14:35:16 2013] User source parameters:
  Position = (185.7, 477.9) = 8 24 5.76 -43 9 40.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 48195.6 +/- 226.4
  Background aperture counts = 2592.4
  Rate = 1 +/- 0.005

[Sun Jun 30 14:35:16 2013] Updating counts from extracted products
[Sun Jun 30 14:35:16 2013] Set source signif. to 48195.58/50.92 = 946.57
[Sun Jun 30 14:36:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:36:19 2013] Using photon index=1.80, rate=1.17, arf fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5.arf
[Sun Jun 30 14:36:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:36:19 2013] Updating source flux to 5.3e-11
[Sun Jun 30 14:37:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:38:37 2013] xmm0690970201/analysis//spectral/fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete