[Mon Jun 24 22:22:33 2013] Detection parameters:
  Position = (329.3, 503.0) = 8 23 8.69 -43 7 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 795.4 +/- 52.4
  Background counts = 426.5
  Rate = 0.02 +/- 0.001

[Mon Jun 24 22:22:45 2013] Off-axis axis estimate = 15.00'
[Tue Jun 25 15:34:11 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 15:34:11 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Tue Jun 25 15:34:11 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Tue Jun 25 15:34:11 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 13.93"
[Wed Jun 26 03:29:15 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src93.ximg exists
[Wed Jun 26 03:29:15 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src93_1.ximg exists
[Wed Jun 26 03:29:15 2013] Fit fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src93 appears to have run properly
[Wed Jun 26 03:29:18 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Wed Jun 26 03:29:18 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Wed Jun 26 03:29:18 2013] Fit fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Wed Jun 26 11:55:04 2013] Source 39 is offset by 5.015887 and 3.533066 pixels which is larger than
2 X fitted extent = 2.218828 x 2.218828, not incorporating fit results
[Wed Jun 26 11:55:04 2013] Warning, spatial fit 93 centroid is now closest to src. 294
[Wed Jun 26 11:55:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:04 2013] Assessing source extent using major
[Wed Jun 26 11:55:04 2013] Source does appear to be extended
[Wed Jun 26 11:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 11:55:04 2013] Source is confused with source 6
[Fri Jun 28 01:18:00 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 01:18:00 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Fri Jun 28 01:18:00 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.022
[Fri Jun 28 01:18:00 2013] Giving source the simple spatial ID 91 for pass 1, mean size = 13.93"
[Fri Jun 28 10:45:31 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91.ximg exists
[Fri Jun 28 10:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91.csv
[Fri Jun 28 10:45:31 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91_1.ximg exists
[Fri Jun 28 10:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91.csv
[Fri Jun 28 10:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 10:45:33 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Fri Jun 28 10:45:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91.csv
[Fri Jun 28 10:45:33 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Fri Jun 28 10:45:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91.csv
[Fri Jun 28 10:45:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:49:55 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 12.772834 pixels away
[Fri Jun 28 20:49:55 2013] Warning, spatial fit 91 centroid is now closest to src. 19
[Fri Jun 28 20:49:56 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:49:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:49:56 2013] Assessing source extent using major
[Fri Jun 28 20:49:56 2013] Source does appear to be extended
[Fri Jun 28 20:49:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 23:27:26 2013] XMMSAS src. selection expression = ellipse(28597.126160, 43713.402710, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 23:27:26 2013] Writing source region out to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_src.reg
[Sat Jun 29 23:27:26 2013] Extracting stamp from image fullrun_mos1_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (292, 466) - (367, 541)
[Sat Jun 29 23:27:26 2013] XMMSAS bgd. selection expression = annulus(28597.126160, 43713.402710, 1087.500000, 2175.000000, X, Y) && !ellipse(27748.877000, 42751.124000, 2220.024064, 913.176026, 72.309500, X, Y) && !ellipse(19088.783800, 38950.762800, 9659.136278, 3965.208114, 340.413000, X, Y) && !ellipse(30509.200800, 43080.489200, 1928.464055, 771.419222, 335.885900, X, Y) && !ellipse(27676.497406, 43700.318726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28998.764000, 42501.742000, 2195.000063, 801.752023, 343.492000, X, Y) && !ellipse(29700.898834, 43799.810638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29985.950745, 42931.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32762.606400, 40922.352000, 2117.040061, 1135.360033, 89.816329, X, Y) && !ellipse(31787.210000, 43610.960000, 2242.208065, 519.282415, 19.676400, X, Y) && !ellipse(26299.451260, 41862.006400, 2093.296060, 1249.064036, 129.429300, X, Y) && !ellipse(27112.802826, 44494.175140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30155.057526, 42241.151794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29010.802000, 44340.684000, 2228.488064, 2228.488064, 0.000000, X, Y) && !ellipse(26680.256000, 44585.493400, 2269.720065, 835.704024, 2.082000, X, Y) && !ellipse(31194.703278, 42500.776489, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 23:27:26 2013] Writing fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39.gif
[Sun Jun 30 02:05:13 2013] Mean detx,y = (10403.84, 12173.98) 
[Sun Jun 30 02:05:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 02:05:25 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 02:05:25 2013] Setting source spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jun 30 02:05:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun 30 05:32:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 05:32:27 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:35:42 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:35:42 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 6118.00
[Sun Jun 30 14:35:42 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_bgd.pi.gz = 1655.00
[Sun Jun 30 14:35:42 2013] Got source and background scale factors 1337600.000000, 384000.000000
[Sun Jun 30 14:35:42 2013] User source parameters:
  Position = (329.3, 503.0) = 8 23 8.69 -43 7 53.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 353.1 +/- 79.2
  Background aperture counts = 5764.9
  Rate = 0.009 +/- 0.002

[Sun Jun 30 14:35:42 2013] Updating counts from extracted products
[Sun Jun 30 14:35:42 2013] Set source signif. to 353.08/75.93 = 4.65
[Sun Jun 30 14:36:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:36:25 2013] Using photon index=1.80, rate=0.00854, arf fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39.arf
[Sun Jun 30 14:36:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:36:25 2013] Updating source flux to 3.1e-13
[Sun Jun 30 14:37:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:38:37 2013] xmm0690970201/analysis//spectral/fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete