[Mon Jun 24 22:22:39 2013] Detection parameters:
  Position = (368.0, 373.9) = 8 22 53.23 -43 17 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 562.6 +/- 60.5
  Background counts = 204.1
  Rate = 0.03 +/- 0.003

[Mon Jun 24 22:22:45 2013] Off-axis axis estimate = 7.44'
[Tue Jun 25 15:34:11 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 15:34:11 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Tue Jun 25 15:34:11 2013] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.592
[Tue Jun 25 15:34:11 2013] Giving source the simple spatial ID 66 for pass 0, mean size = 10.15"
[Wed Jun 26 03:29:15 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66.ximg exists
[Wed Jun 26 03:29:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66.csv
[Wed Jun 26 03:29:15 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66_1.ximg exists
[Wed Jun 26 03:29:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66.csv
[Wed Jun 26 03:29:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 03:29:17 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Wed Jun 26 03:29:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jun 26 03:29:17 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Wed Jun 26 03:29:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Wed Jun 26 03:29:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 26 11:55:04 2013] Warning, spatial fit 66 centroid is now closest to src. 184
[Wed Jun 26 11:55:04 2013] Vigneting correction estimate = 1.000000
[Wed Jun 26 11:55:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 26 11:55:04 2013] Assessing source extent using major
[Wed Jun 26 11:55:04 2013] Source does appear to be extended
[Wed Jun 26 11:55:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 26 11:55:04 2013] Source is confused with source 174
[Wed Jun 26 11:55:04 2013] Source is confused with source 156
[Fri Jun 28 01:18:00 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Fri Jun 28 01:18:00 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Fri Jun 28 01:18:00 2013] source mask rpix=2.3, npix_max = 32, mask sum = 19, frac = 0.592
[Fri Jun 28 01:18:00 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 10.15"
[Fri Jun 28 10:45:31 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65.ximg exists
[Fri Jun 28 10:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65.csv
[Fri Jun 28 10:45:31 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65_1.ximg exists
[Fri Jun 28 10:45:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65.csv
[Fri Jun 28 10:45:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 10:45:33 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Fri Jun 28 10:45:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65.csv
[Fri Jun 28 10:45:33 2013] fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Fri Jun 28 10:45:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65.csv
[Fri Jun 28 10:45:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970201_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 28 20:49:55 2013] Warning, spatial fit 65 centroid is now closest to src. 174
[Fri Jun 28 20:49:55 2013] Vigneting correction estimate = 1.000000
[Fri Jun 28 20:49:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 28 20:49:55 2013] Assessing source extent using major
[Fri Jun 28 20:49:55 2013] Source does appear to be extended
[Fri Jun 28 20:49:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 23:27:23 2013] XMMSAS src. selection expression = ellipse(31965.760956, 32476.904541, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 23:27:23 2013] Writing source region out to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_src.reg
[Sat Jun 29 23:27:23 2013] Extracting stamp from image fullrun_mos1_xmm0690970201_pi300-10000_cl_sm2.00.img.gz, (330, 336) - (405, 411)
[Sat Jun 29 23:27:23 2013] XMMSAS bgd. selection expression = annulus(31965.760956, 32476.904541, 1087.500000, 2175.000000, X, Y) && !ellipse(28175.146000, 35645.566000, 1743.800050, 624.180818, 230.699000, X, Y) && !ellipse(30506.984314, 33957.540039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34027.800079, 34660.108582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34602.404175, 31359.697418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31435.143400, 30536.598000, 2480.320071, 1397.600040, 103.216500, X, Y) && !ellipse(31485.848480, 30926.242645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31685.273041, 32226.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31244.554108, 33831.954498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33049.189400, 33208.701000, 1825.272053, 1415.088041, 29.742000, X, Y) && !ellipse(33878.444061, 29693.839111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32982.658417, 30673.343140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32152.274109, 31648.482300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31358.692000, 35574.110000, 1755.904051, 1100.736032, 358.250000, X, Y) && !ellipse(34775.469604, 34124.889191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33142.000000, 30314.019440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34171.261932, 29869.017944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.570007, 31621.233734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29095.591980, 33432.316833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.168518, 33364.889709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33206.495972, 32728.946472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32653.846313, 32307.603943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29589.148651, 34943.142670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31227.997345, 34649.260132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32220.789795, 32888.649139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35556.223450, 35616.136841, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sat Jun 29 23:27:23 2013] Writing fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166.gif
[Sun Jun 30 01:30:52 2013] Mean detx,y = (-361.19, 7405.30) 
[Sun Jun 30 01:30:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 30 01:31:05 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 30 01:31:05 2013] Setting source spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_src_b10.pi.gz
[Sun Jun 30 01:31:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_bgd.pi.gz
[Sun Jun 30 05:01:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 30 05:01:11 2013] rmf not generated due to insufficient counts
[Sun Jun 30 14:35:35 2013] Updating aperture counts using extracted products
[Sun Jun 30 14:35:35 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_src_b10.pi.gz = 2089.00
[Sun Jun 30 14:35:35 2013] Total counts from fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_bgd.pi.gz = 958.00
[Sun Jun 30 14:35:35 2013] Got source and background scale factors 918368.000000, 626037.000000
[Sun Jun 30 14:35:35 2013] User source parameters:
  Position = (368.0, 373.9) = 8 22 53.23 -43 17 24.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 683.7 +/- 46.7
  Background aperture counts = 1405.3
  Rate = 0.02 +/- 0.001

[Sun Jun 30 14:35:35 2013] Updating counts from extracted products
[Sun Jun 30 14:35:35 2013] Set source signif. to 683.66/37.49 = 18.24
[Sun Jun 30 14:36:23 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 30 14:36:23 2013] Using photon index=1.80, rate=0.0165, arf fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166.arf
[Sun Jun 30 14:36:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 30 14:36:23 2013] Updating source flux to 3.6e-13
[Sun Jun 30 14:37:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 30 14:38:37 2013] xmm0690970201/analysis//spectral/fullrun_mos1_xmm0690970201_pi300-10000_pass1_cl_src166_pl.csv not found, spectral fit skipped or did not complete