[Wed Jun 19 07:58:19 2013] Detection parameters:
  Position = (218.2, 363.8) = 8 21 54.38 -43 15 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 731.0 +/- 39.6
  Background counts = 273.1
  Rate = 0.03 +/- 0.002

[Wed Jun 19 07:58:29 2013] Off-axis axis estimate = 7.50'
[Wed Jun 19 19:38:24 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 19:38:24 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Wed Jun 19 19:38:24 2013] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.806
[Wed Jun 19 19:38:24 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.18"
[Thu Jun 20 01:10:59 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jun 20 01:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13.csv
[Thu Jun 20 01:10:59 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jun 20 01:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13.csv
[Thu Jun 20 01:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 01:11:02 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jun 20 01:11:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 20 01:11:02 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jun 20 01:11:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jun 20 01:11:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 08:57:51 2013] Spatial fit model total counts = 5739.910000, observed total counts = 4054.000000
[Thu Jun 20 08:57:51 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 08:57:52 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 08:57:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 08:57:52 2013] Assessing source extent using major
[Thu Jun 20 08:57:52 2013] Source does appear to be extended
[Thu Jun 20 08:57:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  2 00:48:47 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Tue Jul  2 00:48:47 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Tue Jul  2 00:48:47 2013] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.806
[Tue Jul  2 00:48:47 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.18"
[Tue Jul  2 05:45:00 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul  2 05:45:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13.csv
[Tue Jul  2 05:45:00 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul  2 05:45:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13.csv
[Tue Jul  2 05:45:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 05:45:01 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul  2 05:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul  2 05:45:02 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul  2 05:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul  2 05:45:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 11:21:30 2013] Spatial fit model total counts = 5772.400000, observed total counts = 4054.000000
[Tue Jul  2 11:21:30 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  2 11:21:31 2013] Vigneting correction estimate = 1.000000
[Tue Jul  2 11:21:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  2 11:21:31 2013] Assessing source extent using major
[Tue Jul  2 11:21:31 2013] Source does appear to be extended
[Tue Jul  2 11:21:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  2 11:21:31 2013] Source is confused with source 59
[Tue Jul  2 11:24:30 2013] XMMSAS src. selection expression = ellipse(18935.542252, 31605.646057, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  2 11:24:30 2013] Writing source region out to fullrun_mos1_xmm0690970101_pi300-10000_pass1_cl_src58_src.reg
[Tue Jul  2 11:24:30 2013] Extracting stamp from image fullrun_mos1_xmm0690970101_pi300-10000_cl_sm2.00.img.gz, (181, 326) - (256, 401)
[Tue Jul  2 11:24:30 2013] XMMSAS bgd. selection expression = annulus(18935.542252, 31605.646057, 1087.500000, 2175.000000, X, Y) && !ellipse(17153.335600, 30772.341400, 1689.360049, 1320.128038, -0.000000, X, Y) && !ellipse(18172.180000, 31059.077000, 1650.952048, 1419.552041, 135.919900, X, Y) && !ellipse(18132.896362, 34137.091705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18917.528000, 35223.368000, 1805.000052, 1227.936035, 129.155900, X, Y) && !ellipse(20745.036400, 34840.428600, 1652.152048, 575.166417, 78.003500, X, Y) && !ellipse(18064.178894, 33328.571564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19324.374000, 35764.312000, 3027.152087, 1721.888050, 130.417000, X, Y) && !ellipse(17709.290421, 34500.562561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21356.253265, 34576.947754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21007.228800, 33947.126800, 1648.200047, 578.309617, 67.073700, X, Y) && !ellipse(24264.278000, 34275.994000, 10156.080292, 6199.128178, 336.393000, X, Y) && !ellipse(17391.147552, 33176.061371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17433.670502, 32233.491455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16889.382858, 33430.883118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15155.986200, 31786.951560, 1839.248053, 760.535222, 70.831000, X, Y) && !ellipse(16540.408000, 39460.692000, 10396.176299, 10396.176299, 0.000000, X, Y) && !ellipse(16648.424000, 32357.687600, 2778.960080, 1378.000040, 343.330100, X, Y) && !ellipse(17108.425430, 34051.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15236.166000, 31566.810000, 1815.744052, 822.392024, 80.417270, X, Y) && !ellipse(18433.419128, 32751.692108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15979.161819, 32318.216095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21700.540207, 34131.423218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16287.222214, 31887.726990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20991.126999, 32076.934998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18821.648132, 32832.181976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19167.905106, 32478.463043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16016.267181, 31360.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16171.054062, 33447.105347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16783.225494, 29999.916199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.482437, 33316.108856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19562.852661, 34231.215149, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  2 11:24:30 2013] Writing fullrun_mos1_xmm0690970101_pi300-10000_pass1_cl_src58.gif