[Wed Jun 19 07:58:22 2013] Detection parameters:
  Position = (388.7, 330.1) = 8 20 46.48 -43 17 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 760.8 +/- 40.0
  Background counts = 282.3
  Rate = 0.02 +/- 0.001

[Wed Jun 19 07:58:29 2013] Off-axis axis estimate = 6.93'
[Wed Jun 19 19:38:24 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 19:38:24 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Wed Jun 19 19:38:24 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.812
[Wed Jun 19 19:38:24 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.90"
[Thu Jun 20 01:10:59 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 20 01:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 01:10:59 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 20 01:10:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 20 01:10:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 01:11:03 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 20 01:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 01:11:03 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 20 01:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 20 01:11:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 08:57:52 2013] Spatial fit model total counts = 5182.800000, observed total counts = 4685.000000
[Thu Jun 20 08:57:52 2013] Poor agreement between spatial fit and data for source 110
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 20 08:57:52 2013] Source 110 is offset by 2.007334 and -0.604574 pixels which is larger than
2 X fitted extent = 1.085159 x 1.085159, not incorporating fit results
[Thu Jun 20 08:57:52 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 08:57:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 08:57:52 2013] Assessing source extent using major
[Thu Jun 20 08:57:52 2013] Source does appear to be extended
[Thu Jun 20 08:57:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 08:57:52 2013] Source is confused with source 113
[Tue Jul  2 00:48:47 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Tue Jul  2 00:48:47 2013] Initial guess for spatial extent in simple fitting = 9.90"
[Tue Jul  2 00:48:47 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.812
[Tue Jul  2 00:48:47 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.90"
[Tue Jul  2 05:45:00 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Jul  2 05:45:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28.csv
[Tue Jul  2 05:45:00 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Jul  2 05:45:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28.csv
[Tue Jul  2 05:45:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 05:45:02 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Jul  2 05:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jul  2 05:45:02 2013] fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Jul  2 05:45:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Tue Jul  2 05:45:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690970101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 11:21:30 2013] Warning, spatial fit 28 centroid is now closest to src. 227
[Tue Jul  2 11:21:30 2013] Spatial fit model total counts = 4684.900000, observed total counts = 4313.000000
[Tue Jul  2 11:21:30 2013] Offset between fit and detection position for source 110 = 0.940881 pixels
[Tue Jul  2 11:21:30 2013] Warning, changing simple spatial fit ID from 28 to 52
[Tue Jul  2 11:21:30 2013] 4181.945000 total counts/ 3269.690000 bgd. counts: snr = 15.953757
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 0.940881 pixels
  Position = (389.3, 329.4) = 8 20 46.22 -43 17 44.9
  Extent = 19.6 (19.6-39.2)" x 9.0 (7.3-10.7)", rotation angle = 83 (77-92) degrees
  Source counts = 912.3 +/- 64.7
  Background counts = 3269.7
  Rate = 0.02 +/- 0.001
[Tue Jul  2 11:21:31 2013] Vigneting correction estimate = 1.000000
[Tue Jul  2 11:21:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  2 11:21:31 2013] Assessing source extent using major axis lower bound
[Tue Jul  2 11:21:31 2013] Source does appear to be extended
[Tue Jul  2 11:21:31 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.83
[Tue Jul  2 11:21:31 2013] Source is asymmetric
[Tue Jul  2 11:24:32 2013] XMMSAS src. selection expression = ellipse(33822.952000, 28608.044000, 1176.270034, 539.630416, 83.073950, X, Y)
[Tue Jul  2 11:24:32 2013] Writing source region out to fullrun_mos1_xmm0690970101_pi300-10000_pass1_cl_src110_src.reg
[Tue Jul  2 11:24:32 2013] Extracting stamp from image fullrun_mos1_xmm0690970101_pi300-10000_cl_sm2.00.img.gz, (322, 262) - (457, 397)
[Tue Jul  2 11:24:32 2013] XMMSAS bgd. selection expression = annulus(33822.952000, 28608.044000, 1960.450056, 3920.900113, X, Y) && !ellipse(29858.681915, 27347.987976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29908.849600, 28749.991200, 1359.712039, 546.305616, 344.693400, X, Y) && !ellipse(32541.479800, 25242.418800, 1465.368042, 624.448018, 145.340800, X, Y) && !ellipse(24264.278000, 34275.994000, 10156.080292, 6199.128178, 336.393000, X, Y) && !ellipse(33719.099823, 28074.698700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32068.112200, 24948.409400, 2023.872058, 646.078419, 327.910400, X, Y) && !ellipse(31269.906000, 27966.507800, 1435.456041, 371.675211, 348.849900, X, Y) && !ellipse(31643.812103, 28021.908752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27819.456800, 30480.519300, 2113.128061, 799.100023, 346.922000, X, Y) && !ellipse(32912.018000, 27861.018000, 1488.504043, 1488.504043, 0.000000, X, Y) && !ellipse(33011.465485, 28405.026825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.665558, 29273.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32402.412384, 28263.975739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33826.034000, 28802.248000, 1623.968047, 804.632023, 78.774900, X, Y) && !ellipse(34175.050659, 32507.575439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32592.756744, 28874.797089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33583.536682, 32156.811554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34434.659424, 28407.679199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31454.787292, 27364.751831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33448.220459, 32766.270874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32807.705261, 32496.708405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34072.462982, 26914.400452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32690.578644, 26401.477997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30894.791168, 25092.702545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34129.994812, 33029.578094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32312.959137, 26043.078247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31031.373840, 29347.803833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30925.581543, 28930.831482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30563.321381, 28399.002563, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  2 11:24:32 2013] Writing fullrun_mos1_xmm0690970101_pi300-10000_pass1_cl_src110.gif