[Sun Jun 23 00:12:11 2013] Detection parameters:
  Position = (275.9, 270.8) = 20 0 44.65 22 41 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.7 +/- 17.1
  Background counts = 97.7
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 00:12:12 2013] Off-axis axis estimate = 2.58'
[Sun Jun 23 00:16:14 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:16:14 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Jun 23 00:16:14 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Sun Jun 23 00:16:14 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 7.72"
[Sun Jun 23 02:12:08 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42.ximg exists
[Sun Jun 23 02:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42.csv
[Sun Jun 23 02:12:08 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Jun 23 02:12:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42.csv
[Sun Jun 23 02:12:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 02:12:09 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Jun 23 02:12:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun 23 02:12:09 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Jun 23 02:12:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun Jun 23 02:12:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 04:17:45 2013] Source 43 is offset by -3.969727 and -8.252264 pixels which is larger than
2 X fitted extent = 5.521793 x 2.081766, not incorporating fit results
[Sun Jun 23 04:17:45 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 04:17:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 04:17:45 2013] Assessing source extent using major
[Sun Jun 23 04:17:45 2013] Source does appear to be extended
[Sun Jun 23 04:17:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 04:18:19 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 04:18:19 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun Jun 23 04:18:19 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Sun Jun 23 04:18:19 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 7.72"
[Sun Jun 23 05:59:25 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun 23 05:59:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40.csv
[Sun Jun 23 05:59:25 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun 23 05:59:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40.csv
[Sun Jun 23 05:59:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 05:59:25 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun 23 05:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 05:59:26 2013] fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun 23 05:59:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 05:59:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 07:42:54 2013] Source 43 is offset by -7.092899 and 5.871345 pixels which is larger than
2 X fitted extent = 0.961931 x 0.961931, not incorporating fit results
[Sun Jun 23 07:42:54 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 07:42:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 07:42:54 2013] Assessing source extent using major
[Sun Jun 23 07:42:54 2013] Source does appear to be extended
[Sun Jun 23 07:42:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 07:43:34 2013] XMMSAS src. selection expression = ellipse(23957.767792, 23515.039001, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 07:43:34 2013] Writing source region out to fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun 23 07:43:34 2013] Extracting stamp from image fullrun_pn_xmm0690890201_pi300-10000_cl_sm2.00.img.gz, (238, 233) - (313, 308)
[Sun Jun 23 07:43:34 2013] XMMSAS bgd. selection expression = annulus(23957.767792, 23515.039001, 1087.500000, 2175.000000, X, Y) && !ellipse(24274.302800, 24658.938000, 586.611217, 509.745615, 62.585700, X, Y) && !ellipse(25605.542694, 26153.708008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.457947, 25245.361420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.045013, 24180.495544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.232056, 24118.681152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24483.894258, 22617.745000, 433.761612, 433.761612, 0.000000, X, Y)
[Sun Jun 23 07:43:34 2013] Writing fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43.gif
[Sun Jun 23 08:28:11 2013] Mean detx,y = (-93.05, -1497.77) 
[Sun Jun 23 08:28:16 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 08:28:40 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 08:28:41 2013] Setting source spectrum file to fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jun 23 08:28:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jun 23 09:13:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 09:13:07 2013] rmf not generated due to insufficient counts
[Sun Jun 23 10:31:14 2013] Updating aperture counts using extracted products
[Sun Jun 23 10:31:14 2013] Total counts from fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 691.00
[Sun Jun 23 10:31:15 2013] Total counts from fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_bgd.pi.gz = 2513.00
[Sun Jun 23 10:31:15 2013] Got source and background scale factors 1088175.000000, 5193417.000000
[Sun Jun 23 10:31:15 2013] User source parameters:
  Position = (275.9, 270.8) = 20 0 44.65 22 41 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 164.5 +/- 27.3
  Background aperture counts = 526.5
  Rate = 0.003 +/- 0.0005

[Sun Jun 23 10:31:15 2013] Updating counts from extracted products
[Sun Jun 23 10:31:15 2013] Set source signif. to 164.45/22.95 = 7.17
[Sun Jun 23 10:31:22 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 10:31:22 2013] Using photon index=1.80, rate=0.00288, arf fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43.arf
[Sun Jun 23 10:31:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 10:31:22 2013] Updating source flux to 1.4e-14
[Sun Jun 23 10:31:58 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 10:32:05 2013] xmm0690890201/analysis//spectral/fullrun_pn_xmm0690890201_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete