[Sun Jun 23 00:13:06 2013] Detection parameters:
  Position = (373.6, 339.2) = 20 0 13.94 22 46 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.4 +/- 17.4
  Background counts = 18.9
  Rate = 0.005 +/- 0.0005

[Sun Jun 23 00:13:07 2013] Off-axis axis estimate = 6.20'
[Sun Jun 23 03:10:07 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:10:07 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Sun Jun 23 03:10:07 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Sun Jun 23 03:10:07 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 9.53"
[Sun Jun 23 04:17:30 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 23 04:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 04:17:30 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 23 04:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 04:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 04:17:30 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 23 04:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 04:17:30 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 23 04:17:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 04:17:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690890201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 04:18:02 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.012489 pixels away
[Sun Jun 23 04:18:02 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 04:18:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 04:18:02 2013] Assessing source extent using major
[Sun Jun 23 04:18:02 2013] Source does appear to be extended
[Sun Jun 23 04:18:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 06:45:02 2013] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:45:02 2013] Initial guess for spatial extent in simple fitting = 9.53"
[Sun Jun 23 06:45:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Sun Jun 23 06:45:02 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.53"
[Sun Jun 23 07:42:35 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Jun 23 07:42:35 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Jun 23 07:42:35 2013] Fit fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Jun 23 07:42:36 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Jun 23 07:42:36 2013] fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Jun 23 07:42:36 2013] Fit fullrun_mos2_xmm0690890201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jun 23 07:43:11 2013] Spatial fit model total counts = 375.515000, observed total counts = 345.000000
[Sun Jun 23 07:43:11 2013] Offset between fit and detection position for source 4 = 0.249608 pixels
[Sun Jun 23 07:43:11 2013] 374.947000 total counts/ 249.004000 bgd. counts: snr = 7.981249
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.249608 pixels
  Position = (373.4, 339.2) = 20 0 14.02 22 46 32.7
  Extent = 5.6 (4.8-6.7)", rotation angle = 0
  Source counts = 125.9 +/- 19.4
  Background counts = 249.0
  Rate = 0.002 +/- 0.0003
[Sun Jun 23 07:43:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 07:43:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 07:43:11 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 07:43:11 2013] Source does appear to be extended
[Sun Jun 23 07:43:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 09:55:00 2013] XMMSAS src. selection expression = ellipse(32433.040000, 29464.518800, 335.773210, 335.773210, 0.000000, X, Y)
[Sun Jun 23 09:55:00 2013] Writing source region out to fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 09:55:00 2013] Extracting stamp from image fullrun_mos2_xmm0690890201_pi300-10000_cl_sm2.00.img.gz, (354, 320) - (393, 359)
[Sun Jun 23 09:55:00 2013] XMMSAS bgd. selection expression = annulus(32433.040000, 29464.518800, 559.622016, 1119.244032, X, Y)
[Sun Jun 23 09:55:00 2013] Writing fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 09:56:06 2013] Mean detx,y = (5908.50, -7350.70) 
[Sun Jun 23 09:56:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 09:56:19 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 09:56:19 2013] Setting source spectrum file to fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 23 09:56:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 10:31:32 2013] Updating aperture counts using extracted products
[Sun Jun 23 10:31:33 2013] Total counts from fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 171.00
[Sun Jun 23 10:31:33 2013] Total counts from fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 260.00
[Sun Jun 23 10:31:33 2013] Got source and background scale factors 353600.000000, 2306384.000000
[Sun Jun 23 10:31:33 2013] User source parameters:
  Position = (373.4, 339.2) = 20 0 14.02 22 46 32.7
  Extent = 5.6 (4.8-6.7)", rotation angle = 0
  Source aperture counts = 131.1 +/- 14.1
  Background aperture counts = 39.9
  Rate = 0.002 +/- 0.0002

[Sun Jun 23 10:31:42 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 10:31:42 2013] Using photon index=1.80, rate=0.00206, arf fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 10:31:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 10:31:42 2013] Updating source flux to 5.3e-14
[Sun Jun 23 10:31:58 2013] xmm0690890201/analysis//spectral/fullrun_mos2_xmm0690890201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete