[Sun May 12 00:51:14 2013] Detection parameters:
  Position = (242.8, 408.7) = 5 34 19.07 -68 7 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.8 +/- 10.8
  Background counts = 12.4
  Rate = 0.01 +/- 0.003

[Sun May 12 00:51:14 2013] Off-axis axis estimate = 8.95'
[Sun May 12 00:52:33 2013] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Sun May 12 00:52:33 2013] Initial guess for spatial extent in simple fitting = 10.90"
[Sun May 12 00:52:33 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Sun May 12 00:52:33 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 10.90"
[Sun May 12 01:09:47 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 12 01:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2.csv
[Sun May 12 01:09:47 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 12 01:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2.csv
[Sun May 12 01:09:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:09:47 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 12 01:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 12 01:09:47 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 12 01:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 12 01:09:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:30:10 2013] Warning, spatial fit 2 centroid is now closest to src. 1
[Sun May 12 01:30:10 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:30:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:30:10 2013] Assessing source extent using major
[Sun May 12 01:30:10 2013] Source does appear to be extended
[Sun May 12 01:30:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 01:30:18 2013] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:30:18 2013] Initial guess for spatial extent in simple fitting = 10.90"
[Sun May 12 01:30:18 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Sun May 12 01:30:18 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 10.90"
[Sun May 12 01:46:31 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_src2.ximg exists
[Sun May 12 01:46:31 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May 12 01:46:31 2013] Fit fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun May 12 01:46:31 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May 12 01:46:31 2013] fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May 12 01:46:31 2013] Fit fullrun_pn_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun May 12 02:04:45 2013] Spatial fit model total counts = 160.566000, observed total counts = 153.000000
[Sun May 12 02:04:45 2013] Offset between fit and detection position for source 2 = 0.259019 pixels
[Sun May 12 02:04:45 2013] 161.953800 total counts/ 110.150000 bgd. counts: snr = 4.935934
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.259019 pixels
  Position = (242.8, 408.4) = 5 34 19.12 -68 7 15.3
  Extent = 6.6 (4.5-8.8)", rotation angle = 0
  Source counts = 51.8 +/- 12.7
  Background counts = 110.2
  Rate = 0.006 +/- 0.002
[Sun May 12 02:04:45 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:04:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:04:45 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:04:45 2013] Source does appear to be extended
[Sun May 12 02:04:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 02:04:52 2013] XMMSAS src. selection expression = ellipse(21074.299640, 35483.109000, 396.198011, 396.198011, 0.000000, X, Y)
[Sun May 12 02:04:52 2013] Writing source region out to fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_src.reg
[Sun May 12 02:04:52 2013] Extracting stamp from image fullrun_pn_xmm0690745201_pi300-10000_cl_sm2.00.img.gz, (220, 386) - (266, 431)
[Sun May 12 02:04:52 2013] XMMSAS bgd. selection expression = annulus(21074.299640, 35483.109000, 660.330019, 1320.660038, X, Y) && !ellipse(19814.437927, 35628.580963, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 12 02:04:52 2013] Writing fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2.gif
[Sun May 12 02:05:49 2013] Mean detx,y = (6889.56, 8657.28) 
[Sun May 12 02:05:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:06:05 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:06:05 2013] Setting source spectrum file to fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun May 12 02:06:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 12 02:12:17 2013] Not generating rmf since there are only 51 counts
[Sun May 12 02:12:17 2013] rmf not generated due to insufficient counts
[Sun May 12 02:18:23 2013] Updating aperture counts using extracted products
[Sun May 12 02:18:23 2013] Total counts from fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 78.00
[Sun May 12 02:18:23 2013] Total counts from fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 160.00
[Sun May 12 02:18:23 2013] Got source and background scale factors 492800.000000, 2958758.000000
[Sun May 12 02:18:23 2013] User source parameters:
  Position = (242.8, 408.4) = 5 34 19.12 -68 7 15.3
  Extent = 6.6 (4.5-8.8)", rotation angle = 0
  Source aperture counts = 51.4 +/- 9.9
  Background aperture counts = 26.6
  Rate = 0.006 +/- 0.001

[Sun May 12 02:18:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 02:18:25 2013] Using photon index=1.80, rate=0.00644, arf fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2.arf
[Sun May 12 02:18:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 02:18:25 2013] Updating source flux to 4.6e-14
[Sun May 12 02:18:30 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 02:18:31 2013] xmm0690745201/analysis//spectral/fullrun_pn_xmm0690745201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete