[Sun May 12 00:51:31 2013] Detection parameters:
  Position = (232.9, 298.5) = 5 34 27.10 -68 15 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.9 +/- 6.7
  Background counts = 3.8
  Rate = 0.003 +/- 0.0008

[Sun May 12 00:51:31 2013] Off-axis axis estimate = 4.75'
[Sun May 12 01:09:47 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:09:47 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Sun May 12 01:09:47 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Sun May 12 01:09:47 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.80"
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 12 01:22:10 2013] Fit fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src3 appears to have run properly
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 12 01:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 12 01:22:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 12 01:22:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:30:11 2013] Spatial fit model total counts = 59.096800, observed total counts = 55.000000
[Sun May 12 01:30:11 2013] Offset between fit and detection position for source 3 = 1.453915 pixels
[Sun May 12 01:30:11 2013] 63.251800 total counts/ 36.583000 bgd. counts: snr = 4.409241
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.453915 pixels
  Position = (231.5, 298.5) = 5 34 28.24 -68 15 13.0
  Extent = 12.4 (8.2-17.6)" x 3.9 (2.2-6.5)", rotation angle = 201 (191-210) degrees
  Source counts = 26.7 +/- 8.0
  Background counts = 36.6
  Rate = 0.003 +/- 0.0008
[Sun May 12 01:30:11 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:30:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:30:11 2013] Assessing source extent using major axis lower bound
[Sun May 12 01:30:11 2013] Source does appear to be extended
[Sun May 12 01:30:11 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun May 12 01:46:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 01:46:31 2013] Initial guess for spatial extent in simple fitting = 8.13"
[Sun May 12 01:46:31 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.114
[Sun May 12 01:46:31 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.13"
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 12 01:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3.csv
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 12 01:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3.csv
[Sun May 12 01:56:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 12 01:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 12 01:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 12 01:56:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 02:04:47 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Sun May 12 02:04:47 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:04:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:04:47 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:04:47 2013] Source does appear to be extended
[Sun May 12 02:04:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun May 12 02:14:10 2013] XMMSAS src. selection expression = ellipse(20088.847000, 25924.480800, 744.348021, 231.102607, 200.669000, X, Y)
[Sun May 12 02:14:10 2013] Writing source region out to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_src.reg
[Sun May 12 02:14:10 2013] Extracting stamp from image fullrun_mos1_xmm0690745201_pi300-10000_cl_sm2.00.img.gz, (189, 256) - (274, 341)
[Sun May 12 02:14:10 2013] XMMSAS bgd. selection expression = annulus(20088.847000, 25924.480800, 1240.580036, 2481.160071, X, Y) && !ellipse(21061.706200, 24972.588400, 584.701617, 584.701617, 0.000000, X, Y)
[Sun May 12 02:14:10 2013] Writing fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3.gif
[Sun May 12 02:15:00 2013] Mean detx,y = (659.41, 4000.93) 
[Sun May 12 02:15:04 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:15:23 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:15:23 2013] Setting source spectrum file to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 12 02:15:23 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 12 02:16:09 2013] Not generating rmf since there are only 26 counts
[Sun May 12 02:16:09 2013] rmf not generated due to insufficient counts
[Sun May 12 02:18:26 2013] Updating aperture counts using extracted products
[Sun May 12 02:18:26 2013] Total counts from fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 27.00
[Sun May 12 02:18:26 2013] Total counts from fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_bgd.pi.gz = 258.00
[Sun May 12 02:18:26 2013] Got source and background scale factors 516036.000000, 12779615.000000
[Sun May 12 02:18:26 2013] User source parameters:
  Position = (231.5, 298.5) = 5 34 28.24 -68 15 13.0
  Extent = 12.4 (8.2-17.6)" x 3.9 (2.2-6.5)", rotation angle = 201 (191-210) degrees
  Source aperture counts = 16.6 +/- 6.3
  Background aperture counts = 10.4
  Rate = 0.002 +/- 0.0006

[Sun May 12 02:18:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 02:18:26 2013] Using photon index=1.80, rate=0.00272, arf fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3.arf
[Sun May 12 02:18:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 02:18:26 2013] Updating source flux to 4.9e-14
[Sun May 12 02:18:28 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 02:18:29 2013] xmm0690745201/analysis//spectral/fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete