[Sun May 12 00:51:31 2013] Detection parameters:
  Position = (377.7, 305.2) = 5 32 33.77 -68 14 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.5 +/- 7.5
  Background counts = 3.2
  Rate = 0.006 +/- 0.001

[Sun May 12 00:51:31 2013] Off-axis axis estimate = 5.77'
[Sun May 12 01:09:47 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:09:47 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Sun May 12 01:09:47 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.896
[Sun May 12 01:09:47 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.31"
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 12 01:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 12 01:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1.csv
[Sun May 12 01:22:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 12 01:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:22:10 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 12 01:22:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 12 01:22:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690745201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:30:11 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.511494 pixels away
[Sun May 12 01:30:11 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:30:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:30:11 2013] Assessing source extent using major
[Sun May 12 01:30:11 2013] Source does appear to be extended
[Sun May 12 01:30:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 01:46:31 2013] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:46:31 2013] Initial guess for spatial extent in simple fitting = 9.31"
[Sun May 12 01:46:31 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.896
[Sun May 12 01:46:31 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.31"
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 12 01:56:43 2013] Fit fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 12 01:56:43 2013] fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 12 01:56:43 2013] Fit fullrun_mos1_xmm0690745201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 12 02:04:47 2013] Spatial fit model total counts = 78.216700, observed total counts = 75.000000
[Sun May 12 02:04:47 2013] Offset between fit and detection position for source 1 = 0.353184 pixels
[Sun May 12 02:04:47 2013] 78.146100 total counts/ 32.800000 bgd. counts: snr = 7.917773
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.353184 pixels
  Position = (377.6, 304.8) = 5 32 33.87 -68 14 45.4
  Extent = 15.2 (8.9-18.6)" x 8.6 (3.0-12.1)", rotation angle = 86 (90-90) degrees
  Source counts = 45.3 +/- 8.8
  Background counts = 32.8
  Rate = 0.005 +/- 0.0009
[Sun May 12 02:04:47 2013] Vigneting correction estimate = 1.000000
[Sun May 12 02:04:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 02:04:47 2013] Assessing source extent using major axis lower bound
[Sun May 12 02:04:47 2013] Source does appear to be extended
[Sun May 12 02:04:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.74
[Sun May 12 02:14:10 2013] XMMSAS src. selection expression = ellipse(32803.446300, 26473.397400, 914.304026, 513.153615, 85.549025, X, Y)
[Sun May 12 02:14:10 2013] Writing source region out to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_src.reg
[Sun May 12 02:14:10 2013] Extracting stamp from image fullrun_mos1_xmm0690745201_pi300-10000_cl_sm2.00.img.gz, (325, 252) - (430, 357)
[Sun May 12 02:14:10 2013] XMMSAS bgd. selection expression = annulus(32803.446300, 26473.397400, 1523.840044, 3047.680088, X, Y) && !ellipse(34756.097720, 26278.824600, 378.962411, 202.323206, 90.405337, X, Y)
[Sun May 12 02:14:10 2013] Writing fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1.gif
[Sun May 12 02:14:12 2013] Mean detx,y = (-4475.16, -7550.40) 
[Sun May 12 02:14:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 02:14:42 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 02:14:43 2013] Setting source spectrum file to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 12 02:14:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 12 02:15:55 2013] Not generating rmf since there are only 45 counts
[Sun May 12 02:15:55 2013] rmf not generated due to insufficient counts
[Sun May 12 02:18:25 2013] Updating aperture counts using extracted products
[Sun May 12 02:18:25 2013] Total counts from fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 68.00
[Sun May 12 02:18:25 2013] Total counts from fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 327.00
[Sun May 12 02:18:25 2013] Got source and background scale factors 1473600.000000, 20106082.000000
[Sun May 12 02:18:25 2013] User source parameters:
  Position = (377.6, 304.8) = 5 32 33.87 -68 14 45.4
  Extent = 15.2 (8.9-18.6)" x 8.6 (3.0-12.1)", rotation angle = 86 (90-90) degrees
  Source aperture counts = 44.0 +/- 9.3
  Background aperture counts = 24.0
  Rate = 0.004 +/- 0.0009

[Sun May 12 02:18:26 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 02:18:26 2013] Using photon index=1.80, rate=0.00462, arf fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1.arf
[Sun May 12 02:18:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 02:18:26 2013] Updating source flux to 9.8e-14
[Sun May 12 02:18:28 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 02:18:29 2013] xmm0690745201/analysis//spectral/fullrun_mos1_xmm0690745201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete