[Tue May 28 13:24:14 2013] Detection parameters:
  Position = (260.1, 305.8) = 5 37 34.98 -68 25 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.6 +/- 19.7
  Background counts = 17.9
  Rate = 0.008 +/- 0.0006

[Tue May 28 13:24:14 2013] Off-axis axis estimate = 2.83'
[Tue May 28 14:09:17 2013] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue May 28 14:09:17 2013] Initial guess for spatial extent in simple fitting = 7.84"
[Tue May 28 14:09:17 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Tue May 28 14:09:17 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.84"
[Tue May 28 14:24:36 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 28 14:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1.csv
[Tue May 28 14:24:36 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 28 14:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1.csv
[Tue May 28 14:24:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:24:36 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 28 14:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 14:24:36 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 28 14:24:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 28 14:24:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690743901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 14:50:20 2013] Source 3 is offset by -7.128630 and 6.983366 pixels which is larger than
2 X fitted extent = 0.901614 x 0.901614, not incorporating fit results
[Tue May 28 14:50:20 2013] Vigneting correction estimate = 1.000000
[Tue May 28 14:50:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 14:50:20 2013] Assessing source extent using major
[Tue May 28 14:50:20 2013] Source does appear to be extended
[Tue May 28 14:50:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 15:32:41 2013] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Tue May 28 15:32:41 2013] Initial guess for spatial extent in simple fitting = 7.84"
[Tue May 28 15:32:41 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.943
[Tue May 28 15:32:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.84"
[Tue May 28 15:48:47 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 28 15:48:47 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 28 15:48:47 2013] Fit fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue May 28 15:48:47 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 28 15:48:47 2013] fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 28 15:48:47 2013] Fit fullrun_mos1_xmm0690743901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 28 16:12:49 2013] Spatial fit model total counts = 384.517000, observed total counts = 373.000000
[Tue May 28 16:12:49 2013] Offset between fit and detection position for source 3 = 0.250179 pixels
[Tue May 28 16:12:49 2013] 382.054000 total counts/ 215.109000 bgd. counts: snr = 11.382669
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.250179 pixels
  Position = (259.9, 305.6) = 5 37 35.16 -68 25 57.9
  Extent = 5.4 (4.6-6.2)", rotation angle = 0
  Source counts = 166.9 +/- 19.5
  Background counts = 215.1
  Rate = 0.005 +/- 0.0006
[Tue May 28 16:12:49 2013] Vigneting correction estimate = 1.000000
[Tue May 28 16:12:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 16:12:49 2013] Assessing source extent using major axis lower bound
[Tue May 28 16:12:49 2013] Source does appear to be extended
[Tue May 28 16:12:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 16:55:32 2013] XMMSAS src. selection expression = ellipse(22559.996780, 26542.623400, 326.329809, 326.329809, 0.000000, X, Y)
[Tue May 28 16:55:32 2013] Writing source region out to fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_src.reg
[Tue May 28 16:55:32 2013] Extracting stamp from image fullrun_mos1_xmm0690743901_pi300-10000_cl_sm2.00.img.gz, (241, 287) - (279, 324)
[Tue May 28 16:55:32 2013] XMMSAS bgd. selection expression = annulus(22559.996780, 26542.623400, 543.883016, 1087.766031, X, Y)
[Tue May 28 16:55:32 2013] Writing fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3.gif
[Tue May 28 16:55:34 2013] Mean detx,y = (-610.00, 1952.50) 
[Tue May 28 16:55:35 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 16:55:43 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 16:55:43 2013] Setting source spectrum file to fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 28 16:55:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 28 17:16:50 2013] Updating aperture counts using extracted products
[Tue May 28 17:16:50 2013] Total counts from fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 203.00
[Tue May 28 17:16:50 2013] Total counts from fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_bgd.pi.gz = 259.00
[Tue May 28 17:16:50 2013] Got source and background scale factors 340800.000000, 2408336.000000
[Tue May 28 17:16:50 2013] User source parameters:
  Position = (259.9, 305.6) = 5 37 35.16 -68 25 57.9
  Extent = 5.4 (4.6-6.2)", rotation angle = 0
  Source aperture counts = 166.3 +/- 15.3
  Background aperture counts = 36.7
  Rate = 0.005 +/- 0.0005

[Tue May 28 17:16:53 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 28 17:16:53 2013] Using photon index=1.80, rate=0.00528, arf fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3.arf
[Tue May 28 17:16:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 28 17:16:53 2013] Updating source flux to 7.4e-14
[Tue May 28 17:17:00 2013] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue May 28 17:17:02 2013] xmm0690743901/analysis//spectral/fullrun_mos1_xmm0690743901_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete