[Tue Jun 25 01:00:32 2013] Detection parameters:
  Position = (207.5, 492.6) = 5 35 52.85 -68 24 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 9.6
  Background counts = 11.2
  Rate = 0.002 +/- 0.0003

[Tue Jun 25 01:00:32 2013] Off-axis axis estimate = 15.55'
[Tue Jun 25 01:32:02 2013] Using EEF radius (= 14.20 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 01:32:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 25 01:32:02 2013] Initial guess for spatial extent in simple fitting = 14.20"
[Tue Jun 25 01:32:02 2013] source mask rpix=3.3, npix_max = 56, mask sum = 49, frac = 0.864
[Tue Jun 25 01:32:02 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 14.20"
[Tue Jun 25 02:05:37 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jun 25 02:05:37 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jun 25 02:05:37 2013] Fit fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_src15 appears to have run properly
[Tue Jun 25 02:05:37 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jun 25 02:05:37 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jun 25 02:05:37 2013] Fit fullrun_mos1_xmm0690743801_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jun 25 02:27:24 2013] Spatial fit model total counts = 181.118000, observed total counts = 167.000000
[Tue Jun 25 02:27:24 2013] Offset between fit and detection position for source 16 = 0.161435 pixels
[Tue Jun 25 02:27:24 2013] 177.157000 total counts/ 142.599000 bgd. counts: snr = 2.893946
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.161435 pixels
  Position = (207.6, 492.7) = 5 35 52.73 -68 24 6.7
  Extent = 5.0 (3.6-6.7)", rotation angle = 0
  Source counts = 34.6 +/- 13.3
  Background counts = 142.6
  Rate = 0.001 +/- 0.0005
[Tue Jun 25 02:27:24 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 02:27:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 02:27:24 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 02:27:24 2013] Source does appear to be extended
[Tue Jun 25 02:27:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 02:59:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 25 02:59:03 2013] Initial guess for spatial extent in simple fitting = 5.00"
[Tue Jun 25 02:59:03 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.827
[Tue Jun 25 02:59:03 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 5.00"
[Tue Jun 25 03:31:07 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jun 25 03:31:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15.csv
[Tue Jun 25 03:31:07 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jun 25 03:31:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15.csv
[Tue Jun 25 03:31:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 03:31:07 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jun 25 03:31:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 25 03:31:07 2013] fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jun 25 03:31:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15.csv
[Tue Jun 25 03:31:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690743801_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 04:05:49 2013] Warning, spatial fit 15 centroid is now closest to src. 3
[Tue Jun 25 04:05:49 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 04:05:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 04:05:49 2013] Assessing source extent using major axis lower bound
[Tue Jun 25 04:05:49 2013] Source does appear to be extended
[Tue Jun 25 04:05:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 04:28:42 2013] XMMSAS src. selection expression = ellipse(18014.912200, 42813.859200, 299.943609, 299.943609, 0.000000, X, Y)
[Tue Jun 25 04:28:42 2013] Writing source region out to fullrun_mos1_xmm0690743801_pi300-10000_pass1_cl_src16_src.reg
[Tue Jun 25 04:28:42 2013] Extracting stamp from image fullrun_mos1_xmm0690743801_pi300-10000_cl_sm2.00.img.gz, (190, 475) - (225, 510)
[Tue Jun 25 04:28:42 2013] XMMSAS bgd. selection expression = annulus(18014.912200, 42813.859200, 499.906014, 999.812029, X, Y)
[Tue Jun 25 04:28:42 2013] Writing fullrun_mos1_xmm0690743801_pi300-10000_pass1_cl_src16.gif
[Tue Jun 25 04:34:45 2013] Mean detx,y = (16252.71, 4607.29) 
[Tue Jun 25 04:34:47 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 25 04:34:56 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 25 04:34:56 2013] Setting source spectrum file to fullrun_mos1_xmm0690743801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jun 25 04:34:56 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690743801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jun 25 04:40:20 2013] Not generating rmf since there are only 34 counts
[Tue Jun 25 04:40:20 2013] rmf not generated due to insufficient counts