[Sun May 26 17:30:06 2013] Detection parameters:
  Position = (338.3, 480.0) = 5 12 0.97 -68 42 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.5 +/- 16.6
  Background counts = 23.6
  Rate = 0.004 +/- 0.0005

[Sun May 26 17:30:06 2013] Off-axis axis estimate = 13.48'
[Sun May 26 18:08:10 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sun May 26 18:08:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 18:08:10 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Sun May 26 18:08:10 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.924
[Sun May 26 18:08:10 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.17"
[Sun May 26 18:22:41 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5.ximg exists
[Sun May 26 18:22:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5.csv
[Sun May 26 18:22:41 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May 26 18:22:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5.csv
[Sun May 26 18:22:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 18:22:41 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May 26 18:22:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May 26 18:22:41 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 26 18:22:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May 26 18:22:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690742801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 18:22:49 2013] Spatial fit model total counts = 254.960000, observed total counts = 220.000000
[Sun May 26 18:22:49 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 18:22:49 2013] Vigneting correction estimate = 1.000000
[Sun May 26 18:22:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 18:22:49 2013] Assessing source extent using major
[Sun May 26 18:22:49 2013] Source does appear to be extended
[Sun May 26 18:22:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 18:57:06 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sun May 26 18:57:06 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 18:57:06 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Sun May 26 18:57:06 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.924
[Sun May 26 18:57:06 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.17"
[Sun May 26 19:12:33 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 26 19:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5.csv
[Sun May 26 19:12:33 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 26 19:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5.csv
[Sun May 26 19:12:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 19:12:33 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 26 19:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May 26 19:12:33 2013] fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 26 19:12:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May 26 19:12:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0690742801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 19:12:40 2013] Spatial fit model total counts = 254.924000, observed total counts = 220.000000
[Sun May 26 19:12:40 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 19:12:40 2013] Vigneting correction estimate = 1.000000
[Sun May 26 19:12:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 19:12:40 2013] Assessing source extent using major
[Sun May 26 19:12:40 2013] Source does appear to be extended
[Sun May 26 19:12:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 19:45:45 2013] XMMSAS src. selection expression = ellipse(29387.246948, 41714.635590, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 19:45:45 2013] Writing source region out to fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_src.reg
[Sun May 26 19:45:45 2013] Extracting stamp from image fullrun_mos2_xmm0690742801_pi300-10000_cl_sm2.00.img.gz, (301, 443) - (376, 518)
[Sun May 26 19:45:45 2013] XMMSAS bgd. selection expression = annulus(29387.246948, 41714.635590, 1087.500000, 2175.000000, X, Y) && !ellipse(27384.491974, 39606.677734, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 19:45:45 2013] Writing fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7.gif
[Sun May 26 19:47:21 2013] Mean detx,y = (-4198.28, -16836.46) 
[Sun May 26 19:47:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 19:47:45 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 19:47:45 2013] Setting source spectrum file to fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 26 19:47:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 26 19:56:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 19:56:16 2013] rmf not generated due to insufficient counts
[Sun May 26 19:58:45 2013] Updating aperture counts using extracted products
[Sun May 26 19:58:45 2013] Total counts from fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 142.00
[Sun May 26 19:58:45 2013] Total counts from fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_bgd.pi.gz = 368.00
[Sun May 26 19:58:45 2013] Got source and background scale factors 1178824.000000, 5177781.000000
[Sun May 26 19:58:45 2013] User source parameters:
  Position = (338.3, 480.0) = 5 12 0.97 -68 42 33.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 58.2 +/- 12.9
  Background aperture counts = 83.8
  Rate = 0.002 +/- 0.0004

[Sun May 26 19:58:45 2013] Updating counts from extracted products
[Sun May 26 19:58:45 2013] Set source signif. to 58.22/9.15 = 6.36
[Sun May 26 19:58:47 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 19:58:47 2013] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7.arf
[Sun May 26 19:58:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 19:58:47 2013] Updating source flux to 7.3e-14
[Sun May 26 19:58:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 19:58:50 2013] xmm0690742801/analysis//spectral/fullrun_mos2_xmm0690742801_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete