[Tue Jun 4 12:26:23 2013] Detection parameters: Position = (483.2, 280.3) = 5 4 15.81 -68 19 50.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 104.6 +/- 19.0 Background counts = 78.4 Rate = 0.004 +/- 0.0008 [Tue Jun 4 12:26:23 2013] Off-axis axis estimate = 13.46' [Tue Jun 4 12:29:14 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting [Tue Jun 4 12:29:14 2013] Initial guess for spatial extent in simple fitting = 13.16" [Tue Jun 4 12:29:14 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.986 [Tue Jun 4 12:29:14 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.16" [Tue Jun 4 12:45:16 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6.ximg exists [Tue Jun 4 12:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6.csv [Tue Jun 4 12:45:16 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6_1.ximg exists [Tue Jun 4 12:45:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6.csv [Tue Jun 4 12:45:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 12:45:18 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Tue Jun 4 12:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6.csv [Tue Jun 4 12:45:18 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Tue Jun 4 12:45:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6.csv [Tue Jun 4 12:45:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jun 4 13:03:14 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.620384 pixels away [Tue Jun 4 13:03:14 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 13:03:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 13:03:14 2013] Assessing source extent using major [Tue Jun 4 13:03:14 2013] Source does appear to be extended [Tue Jun 4 13:03:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 4 13:03:29 2013] Using EEF radius (= 13.16 ")to estimate initial spatial extent for simple fitting [Tue Jun 4 13:03:29 2013] Initial guess for spatial extent in simple fitting = 13.16" [Tue Jun 4 13:03:29 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.986 [Tue Jun 4 13:03:29 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.16" [Tue Jun 4 13:24:24 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_src6.ximg exists [Tue Jun 4 13:24:24 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_src6_1.ximg exists [Tue Jun 4 13:24:24 2013] Fit fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_src6 appears to have run properly [Tue Jun 4 13:24:25 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Tue Jun 4 13:24:25 2013] fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Tue Jun 4 13:24:25 2013] Fit fullrun_pn_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Tue Jun 4 13:48:28 2013] Source 6 is offset by -1.247550 and -3.115928 pixels which is larger than 2 X fitted extent = 1.628372 x 1.628372, not incorporating fit results [Tue Jun 4 13:48:28 2013] Vigneting correction estimate = 1.000000 [Tue Jun 4 13:48:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jun 4 13:48:28 2013] Assessing source extent using major [Tue Jun 4 13:48:28 2013] Source does appear to be extended [Tue Jun 4 13:48:28 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jun 4 13:48:36 2013] XMMSAS src. selection expression = ellipse(41992.240143, 24337.150238, 652.500000, 652.500000, 0.000000, X, Y) [Tue Jun 4 13:48:36 2013] Writing source region out to fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_src.reg [Tue Jun 4 13:48:36 2013] Extracting stamp from image fullrun_pn_xmm0690742501_pi300-10000_cl_sm2.00.img.gz, (446, 243) - (521, 318) [Tue Jun 4 13:48:36 2013] XMMSAS bgd. selection expression = annulus(41992.240143, 24337.150238, 1087.500000, 2175.000000, X, Y) && !ellipse(42179.406433, 26590.202789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42314.361572, 25266.198090, 870.000000, 870.000000, 0.000000, X, Y) [Tue Jun 4 13:48:36 2013] Writing fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6.gif [Tue Jun 4 13:52:02 2013] Mean detx,y = (-13707.72, 11489.89) [Tue Jun 4 13:52:04 2013] Setting backscal keywords in source and bgd. spectrum [Tue Jun 4 13:52:37 2013] Binned source spectrum to 10 counts/bin [Tue Jun 4 13:52:37 2013] Setting source spectrum file to fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Tue Jun 4 13:52:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_bgd.pi.gz [Tue Jun 4 14:01:16 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Jun 4 14:01:16 2013] rmf not generated due to insufficient counts [Tue Jun 4 14:17:35 2013] Updating aperture counts using extracted products [Tue Jun 4 14:17:35 2013] Total counts from fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 198.00 [Tue Jun 4 14:17:35 2013] Total counts from fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 908.00 [Tue Jun 4 14:17:36 2013] Got source and background scale factors 1314698.000000, 5535311.000000 [Tue Jun 4 14:17:36 2013] User source parameters: Position = (483.2, 280.3) = 5 4 15.81 -68 19 50.9 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -17.7 +/- 15.1 Background aperture counts = 215.7 Rate = -0.002 +/- 0.002 [Tue Jun 4 14:17:36 2013] Updating counts from extracted products [Tue Jun 4 14:17:36 2013] Set source signif. to -17.66/14.69 = -1.20 [Tue Jun 4 14:17:37 2013] Calculating source flux in energy range 0.30-8.00 [Tue Jun 4 14:17:37 2013] Using photon index=1.80, rate=-0.00221, arf fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6.arf [Tue Jun 4 14:17:37 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jun 4 14:17:37 2013] Updated flux is not positive, keeping original flux [Tue Jun 4 14:17:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Jun 4 14:17:47 2013] xmm0690742501/analysis//spectral/fullrun_pn_xmm0690742501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete