[Tue Jun  4 12:26:41 2013] Detection parameters:
  Position = (250.4, 209.9) = 5 7 18.84 -68 24 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.8 +/- 19.2
  Background counts = 63.8
  Rate = 0.01 +/- 0.001

[Tue Jun  4 12:26:42 2013] Off-axis axis estimate = 7.30'
[Tue Jun  4 12:45:20 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 12:45:20 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Tue Jun  4 12:45:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Tue Jun  4 12:45:20 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.08"
[Tue Jun  4 12:54:19 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun  4 12:54:19 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun  4 12:54:19 2013] Fit fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_src4 appears to have run properly
[Tue Jun  4 12:54:20 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun  4 12:54:20 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun  4 12:54:20 2013] Fit fullrun_mos1_xmm0690742501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jun  4 13:03:17 2013] Spatial fit model total counts = 269.236000, observed total counts = 251.000000
[Tue Jun  4 13:03:17 2013] Offset between fit and detection position for source 6 = 0.088852 pixels
[Tue Jun  4 13:03:17 2013] 269.557200 total counts/ 173.197000 bgd. counts: snr = 7.321963
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.088852 pixels
  Position = (250.5, 209.9) = 5 7 18.77 -68 24 55.5
  Extent = 6.7 (5.0-8.3)", rotation angle = 0
  Source counts = 96.4 +/- 16.4
  Background counts = 173.2
  Rate = 0.005 +/- 0.0008
[Tue Jun  4 13:03:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 13:03:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 13:03:18 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 13:03:18 2013] Source does appear to be extended
[Tue Jun  4 13:03:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 13:24:25 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  4 13:24:25 2013] Initial guess for spatial extent in simple fitting = 6.67"
[Tue Jun  4 13:24:25 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.968
[Tue Jun  4 13:24:25 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 6.67"
[Tue Jun  4 13:39:00 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jun  4 13:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4.csv
[Tue Jun  4 13:39:00 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jun  4 13:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4.csv
[Tue Jun  4 13:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 13:39:01 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun  4 13:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun  4 13:39:01 2013] fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun  4 13:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun  4 13:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690742501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 13:48:29 2013] Warning, spatial fit 4 centroid is now closest to src. 5
[Tue Jun  4 13:48:29 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 13:48:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 13:48:29 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 13:48:29 2013] Source does appear to be extended
[Tue Jun  4 13:48:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 14:02:19 2013] XMMSAS src. selection expression = ellipse(21741.244000, 18213.941620, 400.076412, 400.076412, 0.000000, X, Y)
[Tue Jun  4 14:02:19 2013] Writing source region out to fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_src.reg
[Tue Jun  4 14:02:19 2013] Extracting stamp from image fullrun_mos1_xmm0690742501_pi300-10000_cl_sm2.00.img.gz, (227, 187) - (273, 233)
[Tue Jun  4 14:02:19 2013] XMMSAS bgd. selection expression = annulus(21741.244000, 18213.941620, 666.794019, 1333.588038, X, Y)
[Tue Jun  4 14:02:19 2013] Writing fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6.gif
[Tue Jun  4 14:04:29 2013] Mean detx,y = (7024.52, -3741.82) 
[Tue Jun  4 14:04:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 14:04:40 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 14:04:40 2013] Setting source spectrum file to fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Jun  4 14:04:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun  4 14:08:54 2013] Not generating rmf since there are only 96 counts
[Tue Jun  4 14:08:54 2013] rmf not generated due to insufficient counts
[Tue Jun  4 14:17:37 2013] Updating aperture counts using extracted products
[Tue Jun  4 14:17:37 2013] Total counts from fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 142.00
[Tue Jun  4 14:17:37 2013] Total counts from fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 328.00
[Tue Jun  4 14:17:37 2013] Got source and background scale factors 489852.000000, 3734758.000000
[Tue Jun  4 14:17:37 2013] User source parameters:
  Position = (250.5, 209.9) = 5 7 18.77 -68 24 55.5
  Extent = 6.7 (5.0-8.3)", rotation angle = 0
  Source aperture counts = 99.0 +/- 12.9
  Background aperture counts = 43.0
  Rate = 0.005 +/- 0.0006

[Tue Jun  4 14:17:38 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 14:17:38 2013] Using photon index=1.80, rate=0.0046, arf fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6.arf
[Tue Jun  4 14:17:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 14:17:38 2013] Updating source flux to 9.2e-14
[Tue Jun  4 14:17:40 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun  4 14:17:43 2013] xmm0690742501/analysis//spectral/fullrun_mos1_xmm0690742501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete