[Sun Jun  2 22:22:49 2013] Detection parameters:
  Position = (320.3, 380.1) = 5 33 15.55 -68 10 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.3 +/- 8.5
  Background counts = 7.7
  Rate = 0.004 +/- 0.0008

[Sun Jun  2 22:22:50 2013] Off-axis axis estimate = 6.13'
[Sun Jun  2 22:29:51 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 22:29:51 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sun Jun  2 22:29:51 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.903
[Sun Jun  2 22:29:51 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.49"
[Sun Jun  2 22:35:49 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun  2 22:35:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 22:35:49 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun  2 22:35:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3.csv
[Sun Jun  2 22:35:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 22:35:49 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun  2 22:35:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  2 22:35:49 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun  2 22:35:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun  2 22:35:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690741701_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 22:44:19 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.936381 pixels away
[Sun Jun  2 22:44:19 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 22:44:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 22:44:19 2013] Assessing source extent using major
[Sun Jun  2 22:44:19 2013] Source does appear to be extended
[Sun Jun  2 22:44:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 22:50:20 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 22:50:20 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Sun Jun  2 22:50:20 2013] source mask rpix=2.2, npix_max = 28, mask sum = 26, frac = 0.903
[Sun Jun  2 22:50:20 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.49"
[Sun Jun  2 22:55:15 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun  2 22:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 22:55:15 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun  2 22:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3.csv
[Sun Jun  2 22:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 22:55:15 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun  2 22:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 22:55:15 2013] fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun  2 22:55:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jun  2 22:55:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690741701_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 23:04:53 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.526496 pixels away
[Sun Jun  2 23:04:53 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 23:04:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 23:04:53 2013] Assessing source extent using major
[Sun Jun  2 23:04:53 2013] Source does appear to be extended
[Sun Jun  2 23:04:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 23:09:01 2013] XMMSAS src. selection expression = ellipse(27816.319214, 33021.578491, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 23:09:01 2013] Writing source region out to fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  2 23:09:01 2013] Extracting stamp from image fullrun_mos1_xmm0690741701_pi300-10000_cl_sm2.00.img.gz, (283, 343) - (358, 418)
[Sun Jun  2 23:09:01 2013] XMMSAS bgd. selection expression = annulus(27816.319214, 33021.578491, 1087.500000, 2175.000000, X, Y)
[Sun Jun  2 23:09:01 2013] Writing fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1.gif
[Sun Jun  2 23:09:35 2013] Mean detx,y = (-5950.86, 4419.95) 
[Sun Jun  2 23:09:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 23:09:57 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 23:09:58 2013] Setting source spectrum file to fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  2 23:09:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  2 23:10:26 2013] Not generating rmf since there are only 41 counts
[Sun Jun  2 23:10:26 2013] rmf not generated due to insufficient counts
[Sun Jun  2 23:13:32 2013] Updating aperture counts using extracted products
[Sun Jun  2 23:13:32 2013] Total counts from fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 83.00
[Sun Jun  2 23:13:32 2013] Total counts from fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 259.00
[Sun Jun  2 23:13:32 2013] Got source and background scale factors 1192716.000000, 6409708.000000
[Sun Jun  2 23:13:32 2013] User source parameters:
  Position = (320.3, 380.1) = 5 33 15.55 -68 10 37.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.8 +/- 10.2
  Background aperture counts = 48.2
  Rate = 0.002 +/- 0.0007

[Sun Jun  2 23:13:32 2013] Updating counts from extracted products
[Sun Jun  2 23:13:32 2013] Set source signif. to 34.81/6.94 = 5.01
[Sun Jun  2 23:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 23:13:32 2013] Using photon index=1.80, rate=0.00229, arf fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1.arf
[Sun Jun  2 23:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 23:13:32 2013] Updating source flux to 3.7e-14
[Sun Jun  2 23:13:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  2 23:13:35 2013] xmm0690741701/analysis//spectral/fullrun_mos1_xmm0690741701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete