[Thu May 2 13:13:53 2013] Detection parameters: Position = (335.9, 367.8) = 5 17 3.94 -67 57 30.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 60.4 +/- 13.5 Background counts = 52.9 Rate = 0.003 +/- 0.0008 [Thu May 2 13:13:53 2013] Off-axis axis estimate = 5.72' [Thu May 2 13:15:31 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting [Thu May 2 13:15:31 2013] Initial guess for spatial extent in simple fitting = 9.29" [Thu May 2 13:15:31 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.080 [Thu May 2 13:15:31 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.29" [Thu May 2 13:46:33 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8.ximg exists [Thu May 2 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8.csv [Thu May 2 13:46:33 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8_1.ximg exists [Thu May 2 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8.csv [Thu May 2 13:46:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 13:46:33 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Thu May 2 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 2 13:46:33 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Thu May 2 13:46:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8.csv [Thu May 2 13:46:33 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690741101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 14:21:04 2013] Source 8 is offset by 2.835172 and 1.705370 pixels which is larger than 2 X fitted extent = 1.067628 x 2.323706, not incorporating fit results [Thu May 2 14:21:05 2013] Vigneting correction estimate = 1.000000 [Thu May 2 14:21:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 14:21:05 2013] Assessing source extent using major [Thu May 2 14:21:05 2013] Source does appear to be extended [Thu May 2 14:21:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 14:21:17 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting [Thu May 2 14:21:17 2013] Initial guess for spatial extent in simple fitting = 9.29" [Thu May 2 14:21:17 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.080 [Thu May 2 14:21:17 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 9.29" [Thu May 2 14:53:24 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8.ximg exists [Thu May 2 14:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8.csv [Thu May 2 14:53:24 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8_1.ximg exists [Thu May 2 14:53:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8.csv [Thu May 2 14:53:24 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 14:53:25 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Thu May 2 14:53:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 2 14:53:25 2013] fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Thu May 2 14:53:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8.csv [Thu May 2 14:53:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0690741101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 15:24:26 2013] Source 8 is offset by 2.840528 and 1.720152 pixels which is larger than 2 X fitted extent = 1.067628 x 2.333885, not incorporating fit results [Thu May 2 15:24:26 2013] Vigneting correction estimate = 1.000000 [Thu May 2 15:24:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 15:24:26 2013] Assessing source extent using major [Thu May 2 15:24:26 2013] Source does appear to be extended [Thu May 2 15:24:26 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 15:24:38 2013] XMMSAS src. selection expression = ellipse(29178.343933, 31953.837219, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 15:24:38 2013] Writing source region out to fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_src.reg [Thu May 2 15:24:38 2013] Extracting stamp from image fullrun_pn_xmm0690741101_pi300-10000_cl_sm2.00.img.gz, (298, 330) - (373, 405) [Thu May 2 15:24:38 2013] XMMSAS bgd. selection expression = annulus(29178.343933, 31953.837219, 1087.500000, 2175.000000, X, Y) && !ellipse(27344.447600, 33455.820000, 951.040027, 430.152012, 34.929183, X, Y) && !ellipse(27218.714600, 31376.864838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.337500, 30098.861000, 346.287210, 346.287210, 0.000000, X, Y) && !ellipse(26597.395264, 30008.584869, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 15:24:38 2013] Writing fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8.gif [Thu May 2 15:27:49 2013] Mean detx,y = (4119.31, 5998.83) [Thu May 2 15:27:51 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 15:28:04 2013] Binned source spectrum to 10 counts/bin [Thu May 2 15:28:04 2013] Setting source spectrum file to fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu May 2 15:28:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Thu May 2 15:37:30 2013] Not generating rmf since there are only 60 counts [Thu May 2 15:37:30 2013] rmf not generated due to insufficient counts [Thu May 2 16:04:57 2013] Updating aperture counts using extracted products [Thu May 2 16:04:57 2013] Total counts from fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 342.00 [Thu May 2 16:04:57 2013] Total counts from fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1563.00 [Thu May 2 16:04:57 2013] Got source and background scale factors 1146724.000000, 7778417.000000 [Thu May 2 16:04:57 2013] User source parameters: Position = (335.9, 367.8) = 5 17 3.94 -67 57 30.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 111.6 +/- 19.5 Background aperture counts = 230.4 Rate = 0.005 +/- 0.0008 [Thu May 2 16:04:57 2013] Updating counts from extracted products [Thu May 2 16:04:57 2013] Set source signif. to 111.58/15.18 = 7.35 [Thu May 2 16:05:01 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 16:05:01 2013] Using photon index=1.80, rate=0.00451, arf fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8.arf [Thu May 2 16:05:01 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 16:05:01 2013] Updating source flux to 2.3e-14 [Thu May 2 16:05:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 16:05:10 2013] xmm0690741101/analysis//spectral/fullrun_pn_xmm0690741101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete