[Thu May 16 01:04:59 2013] Detection parameters:
  Position = (280.8, 416.9) = 5 28 20.48 -68 2 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.1 +/- 16.6
  Background counts = 51.9
  Rate = 0.006 +/- 0.0006

[Thu May 16 01:05:00 2013] Off-axis axis estimate = 8.68'
[Thu May 16 01:08:30 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:08:30 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Thu May 16 01:08:30 2013] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.819
[Thu May 16 01:08:30 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.77"
[Thu May 16 02:06:42 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 16 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3.csv
[Thu May 16 02:06:42 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 16 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3.csv
[Thu May 16 02:06:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 02:06:43 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 16 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 16 02:06:43 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 16 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 16 02:06:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 03:01:24 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.846755 pixels away
[Thu May 16 03:01:24 2013] Vigneting correction estimate = 1.000000
[Thu May 16 03:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 03:01:24 2013] Assessing source extent using major
[Thu May 16 03:01:24 2013] Source does appear to be extended
[Thu May 16 03:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 03:01:45 2013] Using EEF radius (= 10.77 ")to estimate initial spatial extent for simple fitting
[Thu May 16 03:01:45 2013] Initial guess for spatial extent in simple fitting = 10.77"
[Thu May 16 03:01:45 2013] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.819
[Thu May 16 03:01:45 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.77"
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3.csv
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3.csv
[Thu May 16 03:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 16 03:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 04:51:31 2013] Source 3 is offset by 0.978596 and -1.688855 pixels which is larger than
2 X fitted extent = 3.464589 x 1.237968, not incorporating fit results
[Thu May 16 04:51:31 2013] Vigneting correction estimate = 1.000000
[Thu May 16 04:51:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 04:51:31 2013] Assessing source extent using major
[Thu May 16 04:51:31 2013] Source does appear to be extended
[Thu May 16 04:51:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 04:51:52 2013] XMMSAS src. selection expression = ellipse(24382.174225, 36222.221619, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 04:51:52 2013] Writing source region out to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_src.reg
[Thu May 16 04:51:52 2013] Extracting stamp from image fullrun_pn_xmm0690740601_pi300-10000_cl_sm2.00.img.gz, (243, 379) - (318, 454)
[Thu May 16 04:51:52 2013] XMMSAS bgd. selection expression = annulus(24382.174225, 36222.221619, 1087.500000, 2175.000000, X, Y)
[Thu May 16 04:51:52 2013] Writing fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3.gif
[Thu May 16 04:54:07 2013] Mean detx,y = (8228.27, -3198.21) 
[Thu May 16 04:54:12 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 04:54:42 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 04:54:43 2013] Setting source spectrum file to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 16 04:54:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 16 05:15:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 05:15:04 2013] rmf not generated due to insufficient counts
[Thu May 16 05:45:42 2013] Updating aperture counts using extracted products
[Thu May 16 05:45:42 2013] Total counts from fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 376.00
[Thu May 16 05:45:42 2013] Total counts from fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 2533.00
[Thu May 16 05:45:42 2013] Got source and background scale factors 1136970.000000, 10485684.000000
[Thu May 16 05:45:42 2013] User source parameters:
  Position = (280.8, 416.9) = 5 28 20.48 -68 2 59.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.3 +/- 20.4
  Background aperture counts = 274.7
  Rate = 0.004 +/- 0.0008

[Thu May 16 05:45:42 2013] Updating counts from extracted products
[Thu May 16 05:45:42 2013] Set source signif. to 101.35/16.57 = 6.12
[Thu May 16 05:45:51 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 05:45:51 2013] Using photon index=1.80, rate=0.00381, arf fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3.arf
[Thu May 16 05:45:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 05:45:51 2013] Updating source flux to 2.2e-14
[Thu May 16 05:46:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 05:46:09 2013] xmm0690740601/analysis//spectral/fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete