[Thu May 16 01:05:00 2013] Detection parameters:
  Position = (318.3, 283.3) = 5 27 51.28 -68 12 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.5 +/- 15.4
  Background counts = 58.2
  Rate = 0.005 +/- 0.0008

[Thu May 16 01:05:00 2013] Off-axis axis estimate = 1.81'
[Thu May 16 01:08:30 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:08:30 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 16 01:08:30 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.732
[Thu May 16 01:08:30 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 7.33"
[Thu May 16 02:06:42 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24.ximg exists
[Thu May 16 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24.csv
[Thu May 16 02:06:42 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu May 16 02:06:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24.csv
[Thu May 16 02:06:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 02:06:43 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu May 16 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 16 02:06:43 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu May 16 02:06:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 16 02:06:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 03:01:24 2013] Spatial fit model total counts = 678.118000, observed total counts = 557.000000
[Thu May 16 03:01:24 2013] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 03:01:24 2013] Vigneting correction estimate = 1.000000
[Thu May 16 03:01:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 03:01:24 2013] Assessing source extent using major
[Thu May 16 03:01:24 2013] Source does appear to be extended
[Thu May 16 03:01:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 03:01:45 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Thu May 16 03:01:45 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Thu May 16 03:01:45 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.732
[Thu May 16 03:01:45 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 7.33"
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24.csv
[Thu May 16 03:58:35 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu May 16 03:58:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24.csv
[Thu May 16 03:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 03:58:36 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu May 16 03:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May 16 03:58:36 2013] fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu May 16 03:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24.csv
[Thu May 16 03:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690740601_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 04:51:31 2013] Source 24 is offset by -6.430495 and 6.033735 pixels which is larger than
2 X fitted extent = 0.843044 x 0.843044, not incorporating fit results
[Thu May 16 04:51:31 2013] Vigneting correction estimate = 1.000000
[Thu May 16 04:51:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 04:51:31 2013] Assessing source extent using major
[Thu May 16 04:51:31 2013] Source does appear to be extended
[Thu May 16 04:51:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 04:51:52 2013] XMMSAS src. selection expression = ellipse(27644.806976, 24597.674988, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 04:51:52 2013] Writing source region out to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_src.reg
[Thu May 16 04:51:52 2013] Extracting stamp from image fullrun_pn_xmm0690740601_pi300-10000_cl_sm2.00.img.gz, (281, 246) - (356, 321)
[Thu May 16 04:51:52 2013] XMMSAS bgd. selection expression = annulus(27644.806976, 24597.674988, 1087.500000, 2175.000000, X, Y) && !ellipse(28903.038635, 22973.598877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.914860, 26401.268000, 1208.424035, 814.568023, 336.909700, X, Y) && !ellipse(26431.223600, 26871.589000, 487.440014, 146.128004, 359.849180, X, Y) && !ellipse(29458.155480, 25981.057400, 356.382410, 217.789606, 16.125400, X, Y) && !ellipse(30262.387085, 22377.189026, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 04:51:52 2013] Writing fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24.gif
[Thu May 16 05:11:09 2013] Mean detx,y = (-1677.20, 3530.81) 
[Thu May 16 05:11:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 05:11:45 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 05:11:46 2013] Setting source spectrum file to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu May 16 05:11:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu May 16 05:22:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 05:22:22 2013] rmf not generated due to insufficient counts
[Thu May 16 05:45:49 2013] Updating aperture counts using extracted products
[Thu May 16 05:45:49 2013] Total counts from fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 398.00
[Thu May 16 05:45:50 2013] Total counts from fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_bgd.pi.gz = 2197.00
[Thu May 16 05:45:50 2013] Got source and background scale factors 1058984.000000, 7374052.000000
[Thu May 16 05:45:50 2013] User source parameters:
  Position = (318.3, 283.3) = 5 27 51.28 -68 12 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 82.5 +/- 21.0
  Background aperture counts = 315.5
  Rate = 0.003 +/- 0.0008

[Thu May 16 05:45:50 2013] Updating counts from extracted products
[Thu May 16 05:45:50 2013] Set source signif. to 82.49/17.76 = 4.64
[Thu May 16 05:45:53 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 05:45:53 2013] Using photon index=1.80, rate=0.0031, arf fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24.arf
[Thu May 16 05:45:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 05:45:53 2013] Updating source flux to 1.6e-14
[Thu May 16 05:46:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 05:46:09 2013] xmm0690740601/analysis//spectral/fullrun_pn_xmm0690740601_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete