[Tue Jul 23 07:13:39 2013] Detection parameters:
  Position = (363.4, 432.4) = 0 42 19.79 41 41 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.4 +/- 23.6
  Background counts = 293.5
  Rate = 0.002 +/- 0.0002

[Tue Jul 23 07:13:43 2013] Off-axis axis estimate = 10.80'
[Tue Jul 23 07:20:26 2013] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Tue Jul 23 07:20:26 2013] Initial guess for spatial extent in simple fitting = 11.83"
[Tue Jul 23 07:20:26 2013] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.845
[Tue Jul 23 07:20:26 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.83"
[Tue Jul 23 09:45:34 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jul 23 09:45:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6.csv
[Tue Jul 23 09:45:34 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jul 23 09:45:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6.csv
[Tue Jul 23 09:45:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 23 09:45:35 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jul 23 09:45:35 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 23 09:45:35 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jul 23 09:45:35 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jul 23 09:45:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 23 16:57:09 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.659097 pixels away
[Tue Jul 23 16:57:09 2013] Vigneting correction estimate = 1.000000
[Tue Jul 23 16:57:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 23 16:57:09 2013] Assessing source extent using major
[Tue Jul 23 16:57:09 2013] Source does appear to be extended
[Tue Jul 23 16:57:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 23 16:57:51 2013] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Tue Jul 23 16:57:51 2013] Initial guess for spatial extent in simple fitting = 11.83"
[Tue Jul 23 16:57:51 2013] source mask rpix=2.7, npix_max = 41, mask sum = 35, frac = 0.845
[Tue Jul 23 16:57:51 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.83"
[Tue Jul 23 19:26:35 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jul 23 19:26:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6.csv
[Tue Jul 23 19:26:35 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jul 23 19:26:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6.csv
[Tue Jul 23 19:26:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 23 19:26:36 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jul 23 19:26:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul 23 19:26:36 2013] fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jul 23 19:26:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul 23 19:26:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 24 03:32:21 2013] Spatial fit model total counts = 1590.050000, observed total counts = 944.000000
[Wed Jul 24 03:32:21 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 24 03:32:22 2013] Vigneting correction estimate = 1.000000
[Wed Jul 24 03:32:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 24 03:32:22 2013] Assessing source extent using major
[Wed Jul 24 03:32:22 2013] Source does appear to be extended
[Wed Jul 24 03:32:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 24 03:33:10 2013] XMMSAS src. selection expression = ellipse(31570.695251, 37571.964172, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 24 03:33:10 2013] Writing source region out to fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 24 03:33:10 2013] Extracting stamp from image fullrun_pn_xmm0690600401_pi300-10000_cl_sm2.00.img.gz, (326, 395) - (401, 470)
[Wed Jul 24 03:33:10 2013] XMMSAS bgd. selection expression = annulus(31570.695251, 37571.964172, 1087.500000, 2175.000000, X, Y) && !ellipse(27807.117200, 37199.983200, 2258.480065, 487.576014, 105.594600, X, Y) && !ellipse(27785.141940, 37120.751800, 1784.568051, 473.908814, 106.970100, X, Y) && !ellipse(27302.451200, 35324.235200, 2193.552063, 525.296815, 101.879000, X, Y) && !ellipse(26810.428800, 33537.963300, 2741.200079, 368.456011, 104.480500, X, Y)
[Wed Jul 24 03:33:10 2013] Writing fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6.gif
[Wed Jul 24 03:43:25 2013] Mean detx,y = (-3475.11, 14043.17) 
[Wed Jul 24 03:43:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 24 03:43:41 2013] Binned source spectrum to 10 counts/bin
[Wed Jul 24 03:43:41 2013] Setting source spectrum file to fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 24 03:43:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul 24 06:16:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 24 06:16:54 2013] rmf not generated due to insufficient counts
[Wed Jul 24 12:08:03 2013] Updating aperture counts using extracted products
[Wed Jul 24 12:08:03 2013] Total counts from fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 685.00
[Wed Jul 24 12:08:03 2013] Total counts from fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_bgd.pi.gz = 3888.00
[Wed Jul 24 12:08:03 2013] Got source and background scale factors 590731.000000, 3256179.000000
[Wed Jul 24 12:08:03 2013] User source parameters:
  Position = (363.4, 432.4) = 0 42 19.79 41 41 57.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -20.4 +/- 27.2
  Background aperture counts = 705.4
  Rate = -0.0002 +/- 0.0003

[Wed Jul 24 12:08:03 2013] Updating counts from extracted products
[Wed Jul 24 12:08:03 2013] Set source signif. to -20.35/26.56 = -0.77
[Wed Jul 24 12:08:25 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 24 12:08:25 2013] Using photon index=1.80, rate=-0.000217, arf fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6.arf
[Wed Jul 24 12:08:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 24 12:08:25 2013] Updated flux is not positive, keeping original flux
[Wed Jul 24 12:09:26 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 24 12:09:41 2013] xmm0690600401/analysis//spectral/fullrun_pn_xmm0690600401_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete