[Tue Jul 23 07:14:10 2013] Detection parameters:
  Position = (288.8, 294.5) = 0 42 48.76 41 31 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 334.4 +/- 70.5
  Background counts = 90.1
  Rate = 0.003 +/- 0.0007

[Tue Jul 23 07:14:11 2013] Off-axis axis estimate = 0.75'
[Tue Jul 23 09:45:37 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Tue Jul 23 09:45:37 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Jul 23 09:45:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Tue Jul 23 09:45:37 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 6.80"
[Tue Jul 23 14:06:02 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jul 23 14:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33.csv
[Tue Jul 23 14:06:02 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jul 23 14:06:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33.csv
[Tue Jul 23 14:06:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 23 14:06:03 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jul 23 14:06:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jul 23 14:06:03 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jul 23 14:06:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Jul 23 14:06:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0690600401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 23 16:57:19 2013] Source 43 is offset by -5.876827 and -6.752014 pixels which is larger than
2 X fitted extent = 3.500386 x 0.786280, not incorporating fit results
[Tue Jul 23 16:57:19 2013] Vigneting correction estimate = 1.000000
[Tue Jul 23 16:57:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 23 16:57:19 2013] Assessing source extent using major
[Tue Jul 23 16:57:19 2013] Source does appear to be extended
[Tue Jul 23 16:57:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 23 16:57:19 2013] Source is confused with source 57
[Tue Jul 23 19:26:37 2013] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Tue Jul 23 19:26:37 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Jul 23 19:26:37 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Tue Jul 23 19:26:37 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 6.80"
[Tue Jul 23 23:37:17 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jul 23 23:37:17 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jul 23 23:37:17 2013] Fit fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_src33 appears to have run properly
[Tue Jul 23 23:37:18 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jul 23 23:37:18 2013] fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jul 23 23:37:18 2013] Fit fullrun_mos1_xmm0690600401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Wed Jul 24 03:32:35 2013] Warning, spatial fit 33 centroid is now closest to src. 57
[Wed Jul 24 03:32:35 2013] Vigneting correction estimate = 1.000000
[Wed Jul 24 03:32:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 24 03:32:35 2013] Assessing source extent using major
[Wed Jul 24 03:32:35 2013] Source does appear to be extended
[Wed Jul 24 03:32:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 24 07:40:47 2013] XMMSAS src. selection expression = ellipse(25080.646057, 25573.432770, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 24 07:40:47 2013] Writing source region out to fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_src.reg
[Wed Jul 24 07:40:47 2013] Extracting stamp from image fullrun_mos1_xmm0690600401_pi300-10000_cl_sm2.00.img.gz, (251, 257) - (326, 332)
[Wed Jul 24 07:40:47 2013] XMMSAS bgd. selection expression = annulus(25080.646057, 25573.432770, 1087.500000, 2175.000000, X, Y) && !ellipse(24450.068600, 24571.463800, 1292.558437, 1254.988836, 11.698100, X, Y) && !ellipse(24043.190704, 23264.860901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23599.866000, 21714.296000, 2650.416076, 1553.424045, 166.162000, X, Y) && !ellipse(24543.398224, 25732.912415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.617200, 26910.249800, 311.621609, 311.621609, 0.000000, X, Y) && !ellipse(23089.788269, 23518.729492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24171.673400, 23976.960000, 1244.168036, 1244.168036, 0.000000, X, Y) && !ellipse(23036.860260, 24096.785126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21984.228760, 24859.654694, 3480.000000, 3480.000000, 0.000000, X, Y)
[Wed Jul 24 07:40:47 2013] Writing fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43.gif
[Wed Jul 24 08:05:02 2013] Mean detx,y = (-712.13, -587.41) 
[Wed Jul 24 08:05:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 24 08:05:10 2013] Binned source spectrum to 10 counts/bin
[Wed Jul 24 08:05:10 2013] Setting source spectrum file to fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jul 24 08:05:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Jul 24 09:12:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 24 09:12:56 2013] rmf not generated due to insufficient counts
[Wed Jul 24 12:08:32 2013] Updating aperture counts using extracted products
[Wed Jul 24 12:08:32 2013] Total counts from fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 1529.00
[Wed Jul 24 12:08:33 2013] Total counts from fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_bgd.pi.gz = 2626.00
[Wed Jul 24 12:08:33 2013] Got source and background scale factors 1264624.000000, 5399488.000000
[Wed Jul 24 12:08:33 2013] User source parameters:
  Position = (288.8, 294.5) = 0 42 48.76 41 31 40.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 914.0 +/- 40.1
  Background aperture counts = 615.0
  Rate = 0.008 +/- 0.0003

[Wed Jul 24 12:08:33 2013] Updating counts from extracted products
[Wed Jul 24 12:08:33 2013] Set source signif. to 913.96/24.80 = 36.85
[Wed Jul 24 12:08:40 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jul 24 12:08:40 2013] Using photon index=1.80, rate=0.00769, arf fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43.arf
[Wed Jul 24 12:08:40 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 24 12:08:40 2013] Updating source flux to 8.7e-14
[Wed Jul 24 12:08:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jul 24 12:09:14 2013] xmm0690600401/analysis//spectral/fullrun_mos1_xmm0690600401_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete