[Thu May  9 00:51:43 2013] Detection parameters:
  Position = (309.8, 214.0) = 19 1 34.77 -37 1 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.4 +/- 9.1
  Background counts = 14.4
  Rate = 0.008 +/- 0.002

[Thu May  9 00:51:44 2013] Off-axis axis estimate = 6.17'
[Thu May  9 00:53:23 2013] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Thu May  9 00:53:23 2013] Initial guess for spatial extent in simple fitting = 9.52"
[Thu May  9 00:53:23 2013] source mask rpix=2.2, npix_max = 28, mask sum = 32, frac = 1.108
[Thu May  9 00:53:23 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.52"
[Thu May  9 02:01:07 2013] fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26.ximg exists
[Thu May  9 02:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26.csv
[Thu May  9 02:01:07 2013] fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu May  9 02:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26.csv
[Thu May  9 02:01:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 02:01:07 2013] fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu May  9 02:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May  9 02:01:07 2013] fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May  9 02:01:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu May  9 02:01:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679990701_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 03:26:55 2013] Source 26 is offset by 8.245810 and -2.528528 pixels which is larger than
2 X fitted extent = 1.053710 x 1.053710, not incorporating fit results
[Thu May  9 03:26:55 2013] Spatial fit model total counts = 525.115000, observed total counts = 668.000000
[Thu May  9 03:26:55 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 03:26:55 2013] Vigneting correction estimate = 1.000000
[Thu May  9 03:26:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 03:26:55 2013] Assessing source extent using major
[Thu May  9 03:26:55 2013] Source does appear to be extended
[Thu May  9 03:26:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 03:26:55 2013] Deleting source due to low Poisson probability 0.9