[Fri Jun 7 01:14:47 2013] Detection parameters: Position = (293.2, 340.4) = 19 1 40.73 -36 52 30.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 22.4 +/- 6.1 Background counts = 2.0 Rate = 0.006 +/- 0.002 [Fri Jun 7 01:14:47 2013] Off-axis axis estimate = 3.07' [Fri Jun 7 01:17:15 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 01:17:15 2013] Initial guess for spatial extent in simple fitting = 7.96" [Fri Jun 7 01:17:15 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Fri Jun 7 01:17:15 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.96" [Fri Jun 7 01:22:15 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_src1.ximg exists [Fri Jun 7 01:22:15 2013] Warning: total counts is not > 0 [Fri Jun 7 01:22:15 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_src1_1.ximg exists [Fri Jun 7 01:22:15 2013] Warning: total counts is not > 0 [Fri Jun 7 01:22:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 01:22:15 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Fri Jun 7 01:22:15 2013] Warning: total counts is not > 0 [Fri Jun 7 01:22:15 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Fri Jun 7 01:22:15 2013] Warning: total counts is not > 0 [Fri Jun 7 01:22:15 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0679990601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 02:16:25 2013] Source 1 is offset by 3.716672 and -3.831753 pixels which is larger than 2 X fitted extent = 0.915080 x 0.915080, not incorporating fit results [Fri Jun 7 02:16:25 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 02:16:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 02:16:25 2013] Assessing source extent using major [Fri Jun 7 02:16:25 2013] Source does appear to be extended [Fri Jun 7 02:16:25 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 02:16:36 2013] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 02:16:36 2013] Initial guess for spatial extent in simple fitting = 7.96" [Fri Jun 7 02:16:36 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921 [Fri Jun 7 02:16:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.96" [Fri Jun 7 02:21:36 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_src1.ximg exists [Fri Jun 7 02:21:36 2013] Warning: total counts is not > 0 [Fri Jun 7 02:21:36 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_src1_1.ximg exists [Fri Jun 7 02:21:36 2013] Warning: total counts is not > 0 [Fri Jun 7 02:21:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 02:21:36 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Fri Jun 7 02:21:36 2013] Warning: total counts is not > 0 [Fri Jun 7 02:21:36 2013] fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Fri Jun 7 02:21:36 2013] Warning: total counts is not > 0 [Fri Jun 7 02:21:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0679990601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 7 03:03:19 2013] Source 1 is offset by -7.159236 and 3.068523 pixels which is larger than 2 X fitted extent = 0.915080 x 0.915080, not incorporating fit results [Fri Jun 7 03:03:19 2013] Vigneting correction estimate = 1.000000 [Fri Jun 7 03:03:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 7 03:03:19 2013] Assessing source extent using major [Fri Jun 7 03:03:19 2013] Source does appear to be extended [Fri Jun 7 03:03:19 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 7 03:03:35 2013] XMMSAS src. selection expression = ellipse(25456.542450, 29565.075500, 652.500000, 652.500000, 0.000000, X, Y) [Fri Jun 7 03:03:35 2013] Writing source region out to fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_src.reg [Fri Jun 7 03:03:35 2013] Extracting stamp from image fullrun_pn_xmm0679990601_pi300-10000_cl_sm2.00.img.gz, (256, 303) - (331, 378) [Fri Jun 7 03:03:35 2013] XMMSAS bgd. selection expression = annulus(25456.542450, 29565.075500, 1087.500000, 2175.000000, X, Y) [Fri Jun 7 03:03:35 2013] Writing fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1.gif [Fri Jun 7 03:03:39 2013] Mean detx,y = (nan, nan) [Fri Jun 7 03:03:44 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 7 03:04:05 2013] Binned source spectrum to 10 counts/bin [Fri Jun 7 03:04:06 2013] Setting source spectrum file to fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Fri Jun 7 03:04:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_bgd.pi.gz [Fri Jun 7 03:05:31 2013] Not generating rmf since there are only 22 counts [Fri Jun 7 03:05:31 2013] rmf not generated due to insufficient counts [Fri Jun 7 04:05:35 2013] Updating aperture counts using extracted products [Fri Jun 7 04:05:35 2013] Total counts from fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 0.00 [Fri Jun 7 04:05:35 2013] Total counts from fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 13.00 [Fri Jun 7 04:05:35 2013] Got source and background scale factors 1340800.000000, 11151096.000000 [Fri Jun 7 04:05:35 2013] User source parameters: Position = (293.2, 340.4) = 19 1 40.73 -36 52 30.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -1.6 +/- 1.9 Background aperture counts = 1.6 Rate = -0.02 +/- 0.03 [Fri Jun 7 04:05:35 2013] Updating counts from extracted products [Fri Jun 7 04:05:35 2013] Set source signif. to -1.56/1.25 = -1.25 [Fri Jun 7 04:05:36 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 7 04:05:36 2013] Using photon index=1.80, rate=-0.0222, arf fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1.arf [Fri Jun 7 04:05:36 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 7 04:05:36 2013] Updated flux is not positive, keeping original flux [Fri Jun 7 04:05:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri Jun 7 04:05:54 2013] xmm0679990601/analysis//spectral/fullrun_pn_xmm0679990601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete