[Sat Jun 22 01:15:44 2013] Detection parameters:
  Position = (355.4, 358.1) = 20 52 35.07 44 33 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.6 +/- 19.4
  Background counts = 43.6
  Rate = 0.01 +/- 0.001

[Sat Jun 22 01:15:46 2013] Off-axis axis estimate = 5.98'
[Sat Jun 22 01:20:14 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:20:14 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Sat Jun 22 01:20:14 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Sat Jun 22 01:20:14 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.42"
[Sat Jun 22 09:57:28 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 22 09:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 09:57:28 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 22 09:57:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 09:57:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 09:57:29 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 22 09:57:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 09:57:29 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 22 09:57:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 09:57:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:13 2013] Source 20 is offset by 2.702833 and -8.772887 pixels which is larger than
2 X fitted extent = 1.140722 x 1.140722, not incorporating fit results
[Sat Jun 22 13:49:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:13 2013] Assessing source extent using major
[Sat Jun 22 13:49:13 2013] Source does appear to be extended
[Sat Jun 22 13:49:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 13:50:10 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 13:50:10 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Sat Jun 22 13:50:10 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Sat Jun 22 13:50:10 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.42"
[Sun Jun 23 08:48:01 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 23 08:48:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 08:48:02 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 23 08:48:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17.csv
[Sun Jun 23 08:48:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:48:03 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 23 08:48:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 08:48:03 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 23 08:48:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sun Jun 23 08:48:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:20 2013] Source 20 is offset by 2.776063 and -8.650611 pixels which is larger than
2 X fitted extent = 1.082763 x 1.082763, not incorporating fit results
[Sun Jun 23 11:50:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:21 2013] Assessing source extent using major
[Sun Jun 23 11:50:21 2013] Source does appear to be extended
[Sun Jun 23 11:50:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:51:04 2013] XMMSAS src. selection expression = ellipse(30873.723511, 31107.952850, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 11:51:04 2013] Writing source region out to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_src.reg
[Sun Jun 23 11:51:04 2013] Extracting stamp from image fullrun_pn_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (318, 321) - (393, 396)
[Sun Jun 23 11:51:04 2013] XMMSAS bgd. selection expression = annulus(30873.723511, 31107.952850, 1087.500000, 2175.000000, X, Y) && !ellipse(32268.536000, 34422.120200, 1759.152051, 378.252811, 357.523396, X, Y) && !ellipse(32779.832800, 32460.290200, 404.281612, 404.281612, 0.000000, X, Y)
[Sun Jun 23 11:51:04 2013] Writing fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20.gif
[Sun Jun 23 12:09:15 2013] Mean detx,y = (1203.60, -5357.55) 
[Sun Jun 23 12:09:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:09:34 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:09:35 2013] Setting source spectrum file to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sun Jun 23 12:09:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sun Jun 23 13:24:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 13:24:38 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:36:42 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:42 2013] Total counts from fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 329.00
[Sun Jun 23 16:36:42 2013] Total counts from fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_bgd.pi.gz = 1668.00
[Sun Jun 23 16:36:42 2013] Got source and background scale factors 1170792.000000, 10020742.000000
[Sun Jun 23 16:36:42 2013] User source parameters:
  Position = (355.4, 358.1) = 20 52 35.07 44 33 19.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 134.1 +/- 19.2
  Background aperture counts = 194.9
  Rate = 0.006 +/- 0.0008

[Sun Jun 23 16:36:42 2013] Updating counts from extracted products
[Sun Jun 23 16:36:42 2013] Set source signif. to 134.12/13.96 = 9.61
[Sun Jun 23 16:36:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:36:53 2013] Using photon index=1.80, rate=0.00573, arf fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20.arf
[Sun Jun 23 16:36:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:36:53 2013] Updating source flux to 4.5e-14
[Sun Jun 23 16:37:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:42 2013] xmm0679580201/analysis//spectral/fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete