[Sat Jun 22 01:15:44 2013] Detection parameters:
  Position = (369.4, 396.2) = 20 52 29.37 44 36 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 15.1
  Background counts = 42.1
  Rate = 0.004 +/- 0.0006

[Sat Jun 22 01:15:46 2013] Off-axis axis estimate = 8.76'
[Sat Jun 22 01:20:14 2013] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:20:14 2013] Initial guess for spatial extent in simple fitting = 10.81"
[Sat Jun 22 01:20:14 2013] source mask rpix=2.5, npix_max = 35, mask sum = 15, frac = 0.421
[Sat Jun 22 01:20:14 2013] Skipping simple spatial due to low active detector fraction
[Sat Jun 22 13:49:13 2013] Spatial fit model total counts = 649.681000, observed total counts = 591.000000
[Sat Jun 22 13:49:13 2013] Offset between fit and detection position for source 16 = 2.076499 pixels
[Sat Jun 22 13:49:13 2013] Warning, changing simple spatial fit ID from -1 to 14
[Sat Jun 22 13:49:13 2013] 649.203000 total counts/ 535.586000 bgd. counts: snr = 4.909403
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.076499 pixels
  Position = (371.5, 396.2) = 20 52 28.53 44 36 4.1
  Extent = 22.0 (18.1-44.0)" x 4.7 (3.4-7.8)", rotation angle = 358 (349-6) degrees
  Source counts = 113.6 +/- 25.5
  Background counts = 535.6
  Rate = 0.005 +/- 0.001
[Sat Jun 22 13:49:13 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:13 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 13:49:13 2013] Source does appear to be extended
[Sat Jun 22 13:49:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.31
[Sat Jun 22 13:49:13 2013] Source is asymmetric
[Sat Jun 22 13:49:13 2013] Source is confused with source 11
[Sat Jun 22 13:50:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 13:50:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 13:50:10 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Sat Jun 22 13:50:10 2013] source mask rpix=3.1, npix_max = 51, mask sum = 37, frac = 0.725
[Sat Jun 22 13:50:10 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 13.36"
[Sun Jun 23 08:48:01 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 08:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 08:48:01 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 08:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 08:48:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 08:48:03 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 08:48:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 08:48:03 2013] fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 08:48:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 08:48:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:20 2013] Spatial fit model total counts = 908.623000, observed total counts = 814.000000
[Sun Jun 23 11:50:20 2013] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 11:50:21 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:21 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:50:21 2013] Source does appear to be extended
[Sun Jun 23 11:50:21 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.31
[Sun Jun 23 11:50:21 2013] Source is asymmetric
[Sun Jun 23 11:51:04 2013] XMMSAS src. selection expression = ellipse(32268.536000, 34422.120200, 1319.364038, 283.689608, 357.523396, X, Y)
[Sun Jun 23 11:51:04 2013] Writing source region out to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_src.reg
[Sun Jun 23 11:51:04 2013] Extracting stamp from image fullrun_pn_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (296, 320) - (447, 472)
[Sun Jun 23 11:51:04 2013] XMMSAS bgd. selection expression = annulus(32268.536000, 34422.120200, 2198.940063, 4397.880127, X, Y) && !ellipse(27363.671234, 39024.283783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32679.162018, 35614.129639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27589.149597, 35246.588623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32779.832800, 32460.290200, 404.281612, 404.281612, 0.000000, X, Y) && !ellipse(30873.723511, 31107.952850, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 11:51:04 2013] Writing fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16.gif
[Sun Jun 23 12:06:21 2013] Mean detx,y = (1119.70, -8993.81) 
[Sun Jun 23 12:06:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:07:38 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:07:39 2013] Setting source spectrum file to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Jun 23 12:07:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Jun 23 16:36:41 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:41 2013] Total counts from fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 282.00
[Sun Jun 23 16:36:41 2013] Total counts from fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_bgd.pi.gz = 5679.00
[Sun Jun 23 16:36:41 2013] Got source and background scale factors 1027626.000000, 35799304.000000
[Sun Jun 23 16:36:41 2013] User source parameters:
  Position = (371.5, 396.2) = 20 52 28.53 44 36 4.1
  Extent = 22.0 (18.1-44.0)" x 4.7 (3.4-7.8)", rotation angle = 358 (349-6) degrees
  Source aperture counts = 119.0 +/- 17.8
  Background aperture counts = 163.0
  Rate = 0.005 +/- 0.0008

[Sun Jun 23 16:36:53 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:36:53 2013] Using photon index=1.80, rate=0.00486, arf fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16.arf
[Sun Jun 23 16:36:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:36:53 2013] Updating source flux to 5.7e-14
[Sun Jun 23 16:37:21 2013] Flag p found in src. 16 procflags, skipping spectral fitting
[Sun Jun 23 16:37:21 2013] Flag c found in src. 16 procflags, skipping spectral fitting
[Sun Jun 23 16:37:42 2013] xmm0679580201/analysis//spectral/fullrun_pn_xmm0679580201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete