[Sat Jun 22 01:17:01 2013] Detection parameters:
  Position = (411.1, 166.2) = 20 52 12.61 44 19 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1802.3 +/- 50.9
  Background counts = 12.3
  Rate = 0.06 +/- 0.002

[Sat Jun 22 01:17:04 2013] Off-axis axis estimate = 12.59'
[Sat Jun 22 11:49:57 2013] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 11:49:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 11:49:57 2013] Initial guess for spatial extent in simple fitting = 12.73"
[Sat Jun 22 11:49:57 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Sat Jun 22 11:49:57 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.73"
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2.csv
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2.csv
[Sat Jun 22 13:48:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun 22 13:48:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:39 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.184796 pixels away
[Sat Jun 22 13:49:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:40 2013] Assessing source extent using major
[Sat Jun 22 13:49:40 2013] Source does appear to be extended
[Sat Jun 22 13:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:08:44 2013] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:08:44 2013] Initial guess for spatial extent in simple fitting = 12.73"
[Sun Jun 23 10:08:44 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.044
[Sun Jun 23 10:08:44 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.73"
[Sun Jun 23 11:49:57 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 23 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 11:49:57 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 23 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2.csv
[Sun Jun 23 11:49:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 23 11:49:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:44 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.184796 pixels away
[Sun Jun 23 11:50:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:44 2013] Assessing source extent using major
[Sun Jun 23 11:50:44 2013] Source does appear to be extended
[Sun Jun 23 11:50:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 15:36:13 2013] Counts = 1802.260132, rescaling region sizes by 2.000000
[Sun Jun 23 15:36:13 2013] XMMSAS src. selection expression = ellipse(35715.395111, 14409.322647, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 23 15:36:13 2013] Writing source region out to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 23 15:36:13 2013] Extracting stamp from image fullrun_mos2_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (336, 91) - (486, 241)
[Sun Jun 23 15:36:13 2013] XMMSAS bgd. selection expression = annulus(35715.395111, 14409.322647, 4350.000000, 8700.000000, X, Y) && !ellipse(44131.792000, 23092.516000, 551.934416, 278.970408, 97.122810, X, Y) && !ellipse(29268.330841, 14308.000092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36346.134491, 22468.691956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27723.252472, 13929.254852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.067400, 14117.646000, 611.735218, 357.544810, 129.986862, X, Y) && !ellipse(33029.574100, 22207.238560, 382.296011, 382.296011, 0.000000, X, Y) && !ellipse(32690.456512, 11634.029816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41349.930145, 17971.571472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38615.528748, 21917.116257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43803.548920, 23519.210052, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 15:36:13 2013] Writing fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5.gif
[Sun Jun 23 15:37:01 2013] Mean detx,y = (-12600.37, -7675.72) 
[Sun Jun 23 15:37:03 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:38:57 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:38:57 2013] Setting source spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 23 15:38:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 23 16:00:29 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 16:00:29 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:37:01 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:37:01 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 1917.00
[Sun Jun 23 16:37:01 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 5159.00
[Sun Jun 23 16:37:01 2013] Got source and background scale factors 3656064.000000, 82616353.000000
[Sun Jun 23 16:37:01 2013] User source parameters:
  Position = (411.1, 166.2) = 20 52 12.61 44 19 23.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1688.7 +/- 44.8
  Background aperture counts = 228.3
  Rate = 0.06 +/- 0.002

[Sun Jun 23 16:37:01 2013] Updating counts from extracted products
[Sun Jun 23 16:37:01 2013] Set source signif. to 1688.70/15.11 = 111.76
[Sun Jun 23 16:37:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:09 2013] Using photon index=1.80, rate=0.0576, arf fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5.arf
[Sun Jun 23 16:37:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:09 2013] Updating source flux to 2e-12
[Sun Jun 23 16:37:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:21 2013] xmm0679580201/analysis//spectral/fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete