[Sat Jun 22 01:17:03 2013] Detection parameters:
  Position = (231.6, 274.9) = 20 53 25.42 44 27 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.5 +/- 14.2
  Background counts = 14.8
  Rate = 0.006 +/- 0.0007

[Sat Jun 22 01:17:04 2013] Off-axis axis estimate = 5.14'
[Sat Jun 22 11:49:57 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 11:49:57 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Jun 22 11:49:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Sat Jun 22 11:49:57 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 9.00"
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18_1.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18.csv
[Sat Jun 22 13:48:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.csv
[Sat Jun 22 13:48:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:40 2013] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.032059 pixels away
[Sat Jun 22 13:49:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:40 2013] Assessing source extent using major
[Sat Jun 22 13:49:40 2013] Source does appear to be extended
[Sat Jun 22 13:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:08:44 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:08:44 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Sun Jun 23 10:08:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Sun Jun 23 10:08:44 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.00"
[Sun Jun 23 11:49:57 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Jun 23 11:49:57 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Jun 23 11:49:57 2013] Fit fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src17 appears to have run properly
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Jun 23 11:49:58 2013] Fit fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Jun 23 11:50:44 2013] Spatial fit model total counts = 292.133000, observed total counts = 284.000000
[Sun Jun 23 11:50:44 2013] Offset between fit and detection position for source 41 = 0.297938 pixels
[Sun Jun 23 11:50:44 2013] 301.241800 total counts/ 217.324000 bgd. counts: snr = 5.692463
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.297938 pixels
  Position = (231.4, 274.7) = 20 53 25.52 44 27 15.7
  Extent = 6.3 (4.3-8.0)" x 5.3 (4.1-6.9)", rotation angle = 33
  Source counts = 83.9 +/- 17.4
  Background counts = 217.3
  Rate = 0.003 +/- 0.0006
[Sun Jun 23 11:50:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:44 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:50:44 2013] Source does appear to be extended
[Sun Jun 23 11:50:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.62
[Sun Jun 23 15:36:13 2013] XMMSAS src. selection expression = ellipse(20079.385600, 23853.092600, 376.104611, 315.375609, 33.467200, X, Y)
[Sun Jun 23 15:36:13 2013] Writing source region out to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_src.reg
[Sun Jun 23 15:36:13 2013] Extracting stamp from image fullrun_mos2_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (210, 253) - (253, 296)
[Sun Jun 23 15:36:13 2013] XMMSAS bgd. selection expression = annulus(20079.385600, 23853.092600, 626.841018, 1253.682036, X, Y) && !ellipse(20783.864400, 24495.677400, 440.187213, 366.762411, 242.109000, X, Y) && !ellipse(18783.014801, 24371.562073, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 15:36:13 2013] Writing fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41.gif
[Sun Jun 23 15:43:32 2013] Mean detx,y = (5528.44, -6049.98) 
[Sun Jun 23 15:43:33 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:43:44 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:43:44 2013] Setting source spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun Jun 23 15:43:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sun Jun 23 16:20:31 2013] Not generating rmf since there are only 83 counts
[Sun Jun 23 16:20:31 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:37:03 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:37:03 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 120.00
[Sun Jun 23 16:37:03 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_bgd.pi.gz = 176.00
[Sun Jun 23 16:37:03 2013] Got source and background scale factors 372800.000000, 2002290.000000
[Sun Jun 23 16:37:03 2013] User source parameters:
  Position = (231.4, 274.7) = 20 53 25.52 44 27 15.7
  Extent = 6.3 (4.3-8.0)" x 5.3 (4.1-6.9)", rotation angle = 33
  Source aperture counts = 87.2 +/- 12.0
  Background aperture counts = 32.8
  Rate = 0.003 +/- 0.0004

[Sun Jun 23 16:37:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:09 2013] Using photon index=1.80, rate=0.00286, arf fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41.arf
[Sun Jun 23 16:37:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:09 2013] Updating source flux to 8.2e-14
[Sun Jun 23 16:37:15 2013] Source 41 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 16:37:21 2013] xmm0679580201/analysis//spectral/fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete