[Sat Jun 22 01:17:03 2013] Detection parameters:
  Position = (216.5, 280.7) = 20 53 31.58 44 27 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.9 +/- 8.3
  Background counts = 15.2
  Rate = 0.001 +/- 0.0003

[Sat Jun 22 01:17:04 2013] Off-axis axis estimate = 6.08'
[Sat Jun 22 11:49:57 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 11:49:57 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Sat Jun 22 11:49:57 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.663
[Sat Jun 22 11:49:57 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 9.47"
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56.csv
[Sat Jun 22 13:48:47 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Jun 22 13:48:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56.csv
[Sat Jun 22 13:48:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun 22 13:48:48 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Jun 22 13:48:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun 22 13:48:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:40 2013] Spatial fit model total counts = 188.045000, observed total counts = 139.000000
[Sat Jun 22 13:49:40 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 13:49:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:40 2013] Assessing source extent using major
[Sat Jun 22 13:49:40 2013] Source does appear to be extended
[Sat Jun 22 13:49:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:08:44 2013] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:08:44 2013] Initial guess for spatial extent in simple fitting = 9.47"
[Sun Jun 23 10:08:44 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.663
[Sun Jun 23 10:08:44 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 9.47"
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53.csv
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53.csv
[Sun Jun 23 11:49:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jun 23 11:49:58 2013] fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun Jun 23 11:49:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jun 23 11:49:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:44 2013] Spatial fit model total counts = 190.904000, observed total counts = 139.000000
[Sun Jun 23 11:50:44 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 11:50:44 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:44 2013] Assessing source extent using major
[Sun Jun 23 11:50:44 2013] Source does appear to be extended
[Sun Jun 23 11:50:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 15:36:14 2013] XMMSAS src. selection expression = ellipse(18783.014801, 24371.562073, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 15:36:14 2013] Writing source region out to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_src.reg
[Sun Jun 23 15:36:14 2013] Extracting stamp from image fullrun_mos2_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (179, 243) - (254, 318)
[Sun Jun 23 15:36:14 2013] XMMSAS bgd. selection expression = annulus(18783.014801, 24371.562073, 1087.500000, 2175.000000, X, Y) && !ellipse(20783.864400, 24495.677400, 440.187213, 366.762411, 242.109000, X, Y) && !ellipse(21290.102400, 25616.593600, 370.347211, 370.347211, 0.000000, X, Y) && !ellipse(20079.385600, 23853.092600, 501.472814, 420.500812, 33.467200, X, Y) && !ellipse(16989.935540, 22125.990400, 799.112823, 279.199208, 58.037200, X, Y) && !ellipse(16562.345642, 23459.471893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18042.511280, 26340.946800, 629.871218, 257.549607, 19.033282, X, Y)
[Sun Jun 23 15:36:14 2013] Writing fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39.gif
[Sun Jun 23 15:54:59 2013] Mean detx,y = (6987.07, -6194.01) 
[Sun Jun 23 15:55:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:55:23 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:55:23 2013] Setting source spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Jun 23 15:55:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Jun 23 16:31:30 2013] Not generating rmf since there are only 37 counts
[Sun Jun 23 16:31:30 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:37:08 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:37:08 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 107.00
[Sun Jun 23 16:37:08 2013] Total counts from fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_bgd.pi.gz = 627.00
[Sun Jun 23 16:37:08 2013] Got source and background scale factors 986450.000000, 8085113.000000
[Sun Jun 23 16:37:08 2013] User source parameters:
  Position = (216.5, 280.7) = 20 53 31.58 44 27 39.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 30.5 +/- 11.4
  Background aperture counts = 76.5
  Rate = 0.001 +/- 0.0004

[Sun Jun 23 16:37:08 2013] Updating counts from extracted products
[Sun Jun 23 16:37:08 2013] Set source signif. to 30.50/8.75 = 3.49
[Sun Jun 23 16:37:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:09 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39.arf
[Sun Jun 23 16:37:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:09 2013] Updating source flux to 3.4e-14
[Sun Jun 23 16:37:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:21 2013] xmm0679580201/analysis//spectral/fullrun_mos2_xmm0679580201_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete