[Sat Jun 22 01:16:23 2013] Detection parameters:
  Position = (418.1, 257.6) = 20 52 9.65 44 26 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.7 +/- 13.5
  Background counts = 13.7
  Rate = 0.006 +/- 0.0007

[Sat Jun 22 01:16:23 2013] Off-axis axis estimate = 9.17'
[Sat Jun 22 09:57:31 2013] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:57:31 2013] Initial guess for spatial extent in simple fitting = 11.01"
[Sat Jun 22 09:57:31 2013] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.870
[Sat Jun 22 09:57:31 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 11.01"
[Sat Jun 22 11:49:56 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14.ximg exists
[Sat Jun 22 11:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 22 11:49:56 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14_1.ximg exists
[Sat Jun 22 11:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14.csv
[Sat Jun 22 11:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jun 22 11:49:57 2013] Fit fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jun 22 13:49:26 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.527299 pixels away
[Sat Jun 22 13:49:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:26 2013] Assessing source extent using major
[Sat Jun 22 13:49:26 2013] Source does appear to be extended
[Sat Jun 22 13:49:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 08:48:05 2013] Using EEF radius (= 11.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:48:05 2013] Initial guess for spatial extent in simple fitting = 11.01"
[Sun Jun 23 08:48:05 2013] source mask rpix=2.5, npix_max = 36, mask sum = 32, frac = 0.870
[Sun Jun 23 08:48:05 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 11.01"
[Sun Jun 23 10:08:42 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Jun 23 10:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 10:08:42 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Jun 23 10:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14.csv
[Sun Jun 23 10:08:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:32 2013] Source 42 is offset by 5.323459 and 7.071341 pixels which is larger than
2 X fitted extent = 1.265931 x 1.265931, not incorporating fit results
[Sun Jun 23 11:50:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:32 2013] Assessing source extent using major
[Sun Jun 23 11:50:32 2013] Source does appear to be extended
[Sun Jun 23 11:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:54:34 2013] XMMSAS src. selection expression = ellipse(36329.598969, 22360.852631, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:54:34 2013] Writing source region out to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_src.reg
[Sun Jun 23 14:54:34 2013] Extracting stamp from image fullrun_mos1_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (381, 220) - (456, 295)
[Sun Jun 23 14:54:34 2013] XMMSAS bgd. selection expression = annulus(36329.598969, 22360.852631, 1087.500000, 2175.000000, X, Y) && !ellipse(38550.872000, 22015.660000, 597.263217, 296.452809, 91.338087, X, Y)
[Sun Jun 23 14:54:34 2013] Writing fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42.gif
[Sun Jun 23 15:04:30 2013] Mean detx,y = (-79.67, 9502.53) 
[Sun Jun 23 15:04:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:04:50 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:04:50 2013] Setting source spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Jun 23 15:04:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Jun 23 15:29:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:29:10 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:36:55 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:55 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 177.00
[Sun Jun 23 16:36:55 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_bgd.pi.gz = 730.00
[Sun Jun 23 16:36:55 2013] Got source and background scale factors 1225930.000000, 10076148.000000
[Sun Jun 23 16:36:56 2013] User source parameters:
  Position = (418.1, 257.6) = 20 52 9.65 44 26 1.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.2 +/- 14.3
  Background aperture counts = 88.8
  Rate = 0.003 +/- 0.0005

[Sun Jun 23 16:36:56 2013] Updating counts from extracted products
[Sun Jun 23 16:36:56 2013] Set source signif. to 88.18/9.42 = 9.36
[Sun Jun 23 16:37:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:00 2013] Using photon index=1.80, rate=0.00301, arf fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42.arf
[Sun Jun 23 16:37:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:00 2013] Updating source flux to 9.4e-14
[Sun Jun 23 16:37:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:15 2013] xmm0679580201/analysis//spectral/fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete