[Sat Jun 22 01:16:23 2013] Detection parameters:
  Position = (216.3, 280.5) = 20 53 31.65 44 27 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.2 +/- 8.4
  Background counts = 15.6
  Rate = 0.002 +/- 0.0005

[Sat Jun 22 01:16:23 2013] Off-axis axis estimate = 6.10'
[Sat Jun 22 09:57:31 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:57:31 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sat Jun 22 09:57:31 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.836
[Sat Jun 22 09:57:31 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.48"
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 11:49:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 22 11:49:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:26 2013] Spatial fit model total counts = 180.126000, observed total counts = 137.000000
[Sat Jun 22 13:49:26 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 13:49:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:26 2013] Assessing source extent using major
[Sat Jun 22 13:49:26 2013] Source does appear to be extended
[Sat Jun 22 13:49:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 08:48:05 2013] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:48:05 2013] Initial guess for spatial extent in simple fitting = 9.48"
[Sun Jun 23 08:48:05 2013] source mask rpix=2.2, npix_max = 28, mask sum = 24, frac = 0.836
[Sun Jun 23 08:48:05 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 9.48"
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:32 2013] Source 37 is offset by -6.436603 and -3.760495 pixels which is larger than
2 X fitted extent = 1.034212 x 1.034212, not incorporating fit results
[Sun Jun 23 11:50:32 2013] Spatial fit model total counts = 180.956000, observed total counts = 137.000000
[Sun Jun 23 11:50:32 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 11:50:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:32 2013] Assessing source extent using major
[Sun Jun 23 11:50:32 2013] Source does appear to be extended
[Sun Jun 23 11:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:54:34 2013] XMMSAS src. selection expression = ellipse(18768.705521, 24356.146973, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:54:34 2013] Writing source region out to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_src.reg
[Sun Jun 23 14:54:34 2013] Extracting stamp from image fullrun_mos1_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (179, 243) - (254, 318)
[Sun Jun 23 14:54:34 2013] XMMSAS bgd. selection expression = annulus(18768.705521, 24356.146973, 1087.500000, 2175.000000, X, Y) && !ellipse(20788.706200, 24508.080400, 466.933613, 371.336811, 69.264000, X, Y) && !ellipse(20099.192474, 23869.336731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21288.869949, 25616.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16957.095400, 22152.430800, 270.175208, 270.175208, 0.000000, X, Y) && !ellipse(16575.993400, 23430.468260, 591.982417, 591.982417, 0.000000, X, Y)
[Sun Jun 23 14:54:34 2013] Writing fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37.gif
[Sun Jun 23 15:09:11 2013] Mean detx,y = (-5938.59, -7203.52) 
[Sun Jun 23 15:09:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:09:28 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:09:28 2013] Setting source spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun Jun 23 15:09:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun Jun 23 15:34:20 2013] Not generating rmf since there are only 35 counts
[Sun Jun 23 15:34:20 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:36:58 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:58 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 108.00
[Sun Jun 23 16:36:58 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 546.00
[Sun Jun 23 16:36:58 2013] Got source and background scale factors 1020598.000000, 6602083.000000
[Sun Jun 23 16:36:58 2013] User source parameters:
  Position = (216.3, 280.5) = 20 53 31.65 44 27 41.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 23.6 +/- 11.4
  Background aperture counts = 84.4
  Rate = 0.0008 +/- 0.0004

[Sun Jun 23 16:36:58 2013] Updating counts from extracted products
[Sun Jun 23 16:36:58 2013] Set source signif. to 23.60/9.19 = 2.57
[Sun Jun 23 16:37:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:01 2013] Using photon index=1.80, rate=0.000805, arf fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37.arf
[Sun Jun 23 16:37:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:01 2013] Updating source flux to 2.7e-14
[Sun Jun 23 16:37:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:15 2013] xmm0679580201/analysis//spectral/fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete