[Sat Jun 22 01:16:22 2013] Detection parameters:
  Position = (268.1, 482.2) = 20 53 10.66 44 42 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.6 +/- 9.9
  Background counts = 12.0
  Rate = 0.002 +/- 0.0003

[Sat Jun 22 01:16:23 2013] Off-axis axis estimate = 13.50'
[Sat Jun 22 09:57:31 2013] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:57:31 2013] Initial guess for spatial extent in simple fitting = 13.18"
[Sat Jun 22 09:57:31 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.983
[Sat Jun 22 09:57:31 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 13.18"
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun 22 11:49:57 2013] Fit fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src39 appears to have run properly
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun 22 11:49:57 2013] Fit fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sat Jun 22 13:49:26 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.117879 pixels away
[Sat Jun 22 13:49:26 2013] Spatial fit model total counts = 179.691000, observed total counts = 176.000000
[Sat Jun 22 13:49:26 2013] Offset between fit and detection position for source 18 = 0.275165 pixels
[Sat Jun 22 13:49:26 2013] 179.935500 total counts/ 145.328000 bgd. counts: snr = 2.870751
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.275165 pixels
  Position = (267.9, 482.0) = 20 53 10.75 44 42 17.5
  Extent = 6.8 (4.9-10.2)", rotation angle = 336 (318-351) degrees
  Source counts = 34.6 +/- 13.4
  Background counts = 145.3
  Rate = 0.001 +/- 0.0005
[Sat Jun 22 13:49:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:26 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 13:49:26 2013] Source does appear to be extended
[Sat Jun 22 13:49:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun Jun 23 08:48:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:48:05 2013] Initial guess for spatial extent in simple fitting = 5.07"
[Sun Jun 23 08:48:05 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.443
[Sun Jun 23 08:48:05 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 5.07"
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:32 2013] Warning, spatial fit 39 centroid is now closest to src. 19
[Sun Jun 23 11:50:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:32 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:50:32 2013] Source does appear to be extended
[Sun Jun 23 11:50:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Sun Jun 23 14:54:34 2013] XMMSAS src. selection expression = ellipse(23255.088800, 41886.863200, 410.409012, 197.706606, 335.661900, X, Y)
[Sun Jun 23 14:54:34 2013] Writing source region out to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_src.reg
[Sun Jun 23 14:54:34 2013] Extracting stamp from image fullrun_mos1_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (244, 458) - (291, 506)
[Sun Jun 23 14:54:34 2013] XMMSAS bgd. selection expression = annulus(23255.088800, 41886.863200, 684.015020, 1368.030039, X, Y) && !ellipse(23400.511400, 40933.009000, 968.352028, 491.256014, 359.800976, X, Y)
[Sun Jun 23 14:54:34 2013] Writing fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18.gif
[Sun Jun 23 15:11:14 2013] Mean detx,y = (11818.26, -10716.26) 
[Sun Jun 23 15:11:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 15:11:26 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 15:11:26 2013] Setting source spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Jun 23 15:11:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Jun 23 15:35:10 2013] Not generating rmf since there are only 34 counts
[Sun Jun 23 15:35:10 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:36:59 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:59 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 39.00
[Sun Jun 23 16:36:59 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 196.00
[Sun Jun 23 16:36:59 2013] Got source and background scale factors 248000.000000, 3073144.000000
[Sun Jun 23 16:36:59 2013] User source parameters:
  Position = (267.9, 482.0) = 20 53 10.75 44 42 17.5
  Extent = 6.8 (4.9-10.2)", rotation angle = 336 (318-351) degrees
  Source aperture counts = 23.2 +/- 7.3
  Background aperture counts = 15.8
  Rate = 0.0008 +/- 0.0002

[Sun Jun 23 16:37:01 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:01 2013] Using photon index=1.80, rate=0.00118, arf fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18.arf
[Sun Jun 23 16:37:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:01 2013] Updating source flux to 9.3e-14
[Sun Jun 23 16:37:11 2013] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 16:37:15 2013] xmm0679580201/analysis//spectral/fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete