[Sat Jun 22 01:16:21 2013] Detection parameters:
  Position = (161.8, 218.8) = 20 53 53.71 44 23 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45932.7 +/- 244.2
  Background counts = 9.2
  Rate = 2 +/- 0.008

[Sat Jun 22 01:16:23 2013] Off-axis axis estimate = 11.46'
[Sat Jun 22 09:57:31 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 09:57:31 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 09:57:31 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sat Jun 22 09:57:31 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.806
[Sat Jun 22 09:57:31 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.16"
[Sat Jun 22 11:49:56 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 22 11:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 22 11:49:56 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 22 11:49:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1.csv
[Sat Jun 22 11:49:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 11:49:57 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 22 11:49:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 11:49:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 13:49:26 2013] Spatial fit model total counts = 49231.400000, observed total counts = 43273.000000
[Sat Jun 22 13:49:26 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 13:49:26 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 13:49:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 13:49:26 2013] Assessing source extent using major
[Sat Jun 22 13:49:26 2013] Source does appear to be extended
[Sat Jun 22 13:49:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 08:48:05 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 08:48:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 23 08:48:05 2013] Initial guess for spatial extent in simple fitting = 12.16"
[Sun Jun 23 08:48:05 2013] source mask rpix=2.8, npix_max = 43, mask sum = 35, frac = 0.806
[Sun Jun 23 08:48:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 12.16"
[Sun Jun 23 10:08:42 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 23 10:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 10:08:42 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 23 10:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1.csv
[Sun Jun 23 10:08:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 10:08:43 2013] fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 23 10:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 23 10:08:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:50:32 2013] Spatial fit model total counts = 49235.900000, observed total counts = 43273.000000
[Sun Jun 23 11:50:32 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 11:50:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:50:32 2013] Assessing source extent using major
[Sun Jun 23 11:50:32 2013] Source does appear to be extended
[Sun Jun 23 11:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:54:32 2013] Counts = 45932.679688, rescaling region sizes by 3.000000
[Sun Jun 23 14:54:32 2013] XMMSAS src. selection expression = ellipse(14029.314941, 18989.460587, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sun Jun 23 14:54:32 2013] Writing source region out to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 23 14:54:32 2013] Extracting stamp from image fullrun_mos1_xmm0679580201_pi300-10000_cl_sm2.00.img.gz, (49, 106) - (274, 331)
[Sun Jun 23 14:54:32 2013] XMMSAS bgd. selection expression = annulus(14029.314941, 18989.460587, 9787.500000, 19575.000000, X, Y) && !ellipse(25460.328522, 35511.536652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20788.706200, 24508.080400, 466.933613, 371.336811, 69.264000, X, Y) && !ellipse(32691.914124, 35686.941162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13164.218781, 26821.893921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21922.605600, 37436.753880, 443.242413, 262.840808, 326.224100, X, Y) && !ellipse(20099.192474, 23869.336731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31629.448395, 27112.914337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21288.869949, 25616.553101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16799.026901, 28834.398163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11325.239288, 27617.178741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32389.185400, 26728.221880, 379.760811, 261.281608, 62.786000, X, Y) && !ellipse(12982.922760, 20825.713364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32877.331200, 32457.153400, 784.561623, 328.376809, 48.344916, X, Y) && !ellipse(30842.443060, 31119.218800, 447.391213, 447.391213, 0.000000, X, Y) && !ellipse(21847.725000, 24763.091800, 381.565611, 381.565611, 0.000000, X, Y) && !ellipse(29330.612518, 14300.802307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16935.081223, 36062.447266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16957.095400, 22152.430800, 270.175208, 270.175208, 0.000000, X, Y) && !ellipse(30879.684052, 25122.717651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.174200, 35207.826600, 734.630854, 734.630854, 0.000000, X, Y) && !ellipse(13078.744200, 30269.140200, 735.144821, 735.144821, 0.000000, X, Y) && !ellipse(32671.096540, 11652.944200, 571.716816, 354.943210, 354.621335, X, Y) && !ellipse(18768.705521, 24356.146973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.368103, 37772.639252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17740.536600, 38949.460800, 799.832023, 315.883209, 319.783395, X, Y) && !ellipse(27383.480408, 39010.440460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.364000, 28415.224800, 498.104014, 498.104014, 0.000000, X, Y) && !ellipse(32166.226000, 34449.047600, 704.902420, 704.902420, 0.000000, X, Y) && !ellipse(13579.042000, 27807.447800, 368.076011, 368.076011, 0.000000, X, Y) && !ellipse(31451.059631, 22961.858337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30874.958000, 14154.191000, 265.305608, 265.305608, 0.000000, X, Y) && !ellipse(16575.993400, 23430.468260, 591.982417, 591.982417, 0.000000, X, Y) && !ellipse(16246.881800, 31529.516800, 825.768024, 311.088009, 81.091989, X, Y)
[Sun Jun 23 14:54:32 2013] Writing fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 23 14:54:40 2013] Mean detx,y = (-12740.89, -9065.28) 
[Sun Jun 23 14:54:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:59:41 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:59:41 2013] Setting source spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 23 14:59:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 23 15:13:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 15:13:57 2013] rmf not generated due to insufficient counts
[Sun Jun 23 16:36:53 2013] Updating aperture counts using extracted products
[Sun Jun 23 16:36:53 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 44849.00
[Sun Jun 23 16:36:53 2013] Total counts from fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 16409.00
[Sun Jun 23 16:36:54 2013] Got source and background scale factors 7096021.000000, 239689373.000000
[Sun Jun 23 16:36:54 2013] User source parameters:
  Position = (161.8, 218.8) = 20 53 53.71 44 23 11.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 44363.2 +/- 212.8
  Background aperture counts = 485.8
  Rate = 2 +/- 0.007

[Sun Jun 23 16:36:54 2013] Updating counts from extracted products
[Sun Jun 23 16:36:54 2013] Set source signif. to 44363.21/22.04 = 2012.79
[Sun Jun 23 16:37:00 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 16:37:00 2013] Using photon index=1.80, rate=1.51, arf fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 23 16:37:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 16:37:00 2013] Updating source flux to 6.9e-11
[Sun Jun 23 16:37:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 16:37:15 2013] xmm0679580201/analysis//spectral/fullrun_mos1_xmm0679580201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete