[Sat May 11 03:42:14 2013] Detection parameters:
  Position = (325.9, 362.2) = 20 50 45.43 44 54 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.7 +/- 23.5
  Background counts = 11.5
  Rate = 0.01 +/- 0.0009

[Sat May 11 03:42:15 2013] Off-axis axis estimate = 5.03'
[Sat May 11 04:38:26 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:38:26 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sat May 11 04:38:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sat May 11 04:38:26 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.95"
[Sat May 11 05:05:41 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 11 05:05:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 05:05:41 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 11 05:05:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1.csv
[Sat May 11 05:05:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:05:41 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 11 05:05:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 11 05:05:41 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 11 05:05:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 11 05:05:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:27:43 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.128443 pixels away
[Sat May 11 05:27:43 2013] Vigneting correction estimate = 1.000000
[Sat May 11 05:27:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 05:27:43 2013] Assessing source extent using major
[Sat May 11 05:27:43 2013] Source does appear to be extended
[Sat May 11 05:27:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 06:11:21 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Sat May 11 06:11:21 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Sat May 11 06:11:21 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Sat May 11 06:11:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.95"
[Sat May 11 06:43:24 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 11 06:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 06:43:24 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 11 06:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1.csv
[Sat May 11 06:43:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 06:43:24 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 11 06:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 11 06:43:24 2013] fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 11 06:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 11 06:43:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0679580101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 07:04:38 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.128443 pixels away
[Sat May 11 07:04:39 2013] Vigneting correction estimate = 1.000000
[Sat May 11 07:04:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 07:04:39 2013] Assessing source extent using major
[Sat May 11 07:04:39 2013] Source does appear to be extended
[Sat May 11 07:04:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 08:01:50 2013] XMMSAS src. selection expression = ellipse(28305.049042, 31463.094879, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 08:01:50 2013] Writing source region out to fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_src.reg
[Sat May 11 08:01:50 2013] Extracting stamp from image fullrun_mos1_xmm0679580101_pi300-10000_cl_sm2.00.img.gz, (288, 325) - (363, 400)
[Sat May 11 08:01:50 2013] XMMSAS bgd. selection expression = annulus(28305.049042, 31463.094879, 1087.500000, 2175.000000, X, Y) && !ellipse(29431.959200, 31958.009040, 491.951214, 202.620006, 111.579700, X, Y) && !ellipse(27842.192474, 29203.887970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31034.687317, 31513.107666, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 08:01:50 2013] Writing fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1.gif
[Sat May 11 08:01:52 2013] Mean detx,y = (4636.07, -1691.00) 
[Sat May 11 08:01:53 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 08:02:08 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 08:02:08 2013] Setting source spectrum file to fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 11 08:02:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 11 08:08:14 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 08:08:14 2013] rmf not generated due to insufficient counts
[Sat May 11 08:30:35 2013] Updating aperture counts using extracted products
[Sat May 11 08:30:35 2013] Total counts from fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 410.00
[Sat May 11 08:30:35 2013] Total counts from fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 532.00
[Sat May 11 08:30:35 2013] Got source and background scale factors 1260684.000000, 9064723.000000
[Sat May 11 08:30:35 2013] User source parameters:
  Position = (325.9, 362.2) = 20 50 45.43 44 54 53.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 336.0 +/- 21.3
  Background aperture counts = 74.0
  Rate = 0.01 +/- 0.0007

[Sat May 11 08:30:35 2013] Updating counts from extracted products
[Sat May 11 08:30:35 2013] Set source signif. to 336.01/8.60 = 39.06
[Sat May 11 08:30:38 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 08:30:38 2013] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1.arf
[Sat May 11 08:30:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 08:30:38 2013] Updating source flux to 2.3e-13
[Sat May 11 08:30:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 08:30:44 2013] xmm0679580101/analysis//spectral/fullrun_mos1_xmm0679580101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete