[Thu Jun 20 00:28:46 2013] Detection parameters:
  Position = (310.7, 368.6) = 17 36 17.17 -44 40 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.4 +/- 17.7
  Background counts = 32.8
  Rate = 0.006 +/- 0.0006

[Thu Jun 20 00:28:48 2013] Off-axis axis estimate = 5.16'
[Thu Jun 20 12:38:50 2013] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 20 12:38:50 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Thu Jun 20 12:38:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.756
[Thu Jun 20 12:38:50 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 9.01"
[Thu Jun 20 21:29:19 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61.ximg exists
[Thu Jun 20 21:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61.csv
[Thu Jun 20 21:29:19 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Jun 20 21:29:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61.csv
[Thu Jun 20 21:29:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 21:29:21 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Jun 20 21:29:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jun 20 21:29:21 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Jun 20 21:29:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61.csv
[Thu Jun 20 21:29:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679380301_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 20 21:30:10 2013] Source 140 is offset by 6.014922 and -6.465183 pixels which is larger than
2 X fitted extent = 2.776795 x 2.776795, not incorporating fit results
[Thu Jun 20 21:30:11 2013] Vigneting correction estimate = 1.000000
[Thu Jun 20 21:30:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 20 21:30:11 2013] Assessing source extent using major
[Thu Jun 20 21:30:11 2013] Source does appear to be extended
[Thu Jun 20 21:30:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 20 21:30:11 2013] Source is confused with source 145
[Fri Jun 21 08:36:10 2013] Using EEF radius (= 9.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 08:36:10 2013] Initial guess for spatial extent in simple fitting = 9.01"
[Fri Jun 21 08:36:10 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.756
[Fri Jun 21 08:36:10 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 9.01"
[Fri Jun 21 17:10:58 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60.ximg exists
[Fri Jun 21 17:10:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60.csv
[Fri Jun 21 17:10:58 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60_1.ximg exists
[Fri Jun 21 17:10:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60.csv
[Fri Jun 21 17:10:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:11:01 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Fri Jun 21 17:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Jun 21 17:11:01 2013] fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Fri Jun 21 17:11:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60.csv
[Fri Jun 21 17:11:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679380301_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 17:11:55 2013] Source 140 is offset by 6.438049 and -6.642448 pixels which is larger than
2 X fitted extent = 3.209775 x 3.209775, not incorporating fit results
[Fri Jun 21 17:11:56 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 17:11:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 17:11:56 2013] Assessing source extent using major
[Fri Jun 21 17:11:56 2013] Source does appear to be extended
[Fri Jun 21 17:11:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 18:22:48 2013] XMMSAS src. selection expression = ellipse(26979.698242, 32019.127045, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 18:22:48 2013] Writing source region out to fullrun_mos2_xmm0679380301_pi300-10000_pass1_cl_src140_src.reg
[Fri Jun 21 18:22:48 2013] Extracting stamp from image fullrun_mos2_xmm0679380301_pi300-10000_cl_sm2.00.img.gz, (273, 331) - (348, 406)
[Fri Jun 21 18:22:48 2013] XMMSAS bgd. selection expression = annulus(26979.698242, 32019.127045, 1087.500000, 2175.000000, X, Y) && !ellipse(27797.006200, 34831.660000, 1384.504040, 522.612815, 76.216300, X, Y) && !ellipse(23519.068800, 28689.347200, 1604.048046, 341.142410, 125.897300, X, Y) && !ellipse(23859.394560, 29185.223000, 1647.096047, 368.510411, 122.617500, X, Y) && !ellipse(24391.546800, 30122.335800, 1705.848049, 352.085610, 296.432000, X, Y) && !ellipse(27782.172200, 33877.570000, 1546.024044, 591.271217, 96.543330, X, Y) && !ellipse(24104.425000, 29590.491600, 1647.168047, 358.776810, 300.586500, X, Y) && !ellipse(26842.605804, 31354.177612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25070.980800, 31864.827000, 986.624028, 226.220007, 108.144216, X, Y) && !ellipse(26502.399000, 30295.756000, 1381.800040, 309.588009, 292.596200, X, Y) && !ellipse(24018.993400, 35077.158600, 1647.184047, 205.897606, 85.691000, X, Y) && !ellipse(27791.667267, 33447.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24041.942841, 34224.030640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.601379, 32670.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27676.626000, 31187.261000, 1646.856047, 205.856806, 100.631800, X, Y) && !ellipse(27825.131256, 31882.270905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26533.886963, 29000.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.145599, 33546.953033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28558.753021, 34739.302795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26498.354500, 29715.676000, 1238.352036, 1238.352036, 0.000000, X, Y) && !ellipse(26649.579865, 35031.523285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.974915, 32743.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27710.460541, 29194.969727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25643.464478, 34495.948120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25449.112000, 29502.706000, 1228.328035, 421.237612, 114.425100, X, Y) && !ellipse(28322.649231, 31957.822418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28523.860626, 33883.934662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28447.963959, 33466.237488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25752.450775, 29963.059082, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 21 18:22:48 2013] Writing fullrun_mos2_xmm0679380301_pi300-10000_pass1_cl_src140.gif
[Fri Jun 21 19:01:36 2013] Mean detx,y = (-328.47, 4334.41) 
[Fri Jun 21 19:01:37 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 19:01:50 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 19:01:50 2013] Setting source spectrum file to fullrun_mos2_xmm0679380301_pi300-10000_pass1_cl_src140_src_b10.pi.gz
[Fri Jun 21 19:01:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0679380301_pi300-10000_pass1_cl_src140_bgd.pi.gz
[Fri Jun 21 21:47:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 21:47:00 2013] rmf not generated due to insufficient counts