[Sun May 27 04:02:49 2012] Detection parameters:
  Position = (311.1, 287.3) = 18 33 6.86 -65 34 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.1 +/- 10.7
  Background counts = 19.8
  Rate = 0.005 +/- 0.001

[Sun May 27 04:02:49 2012] Off-axis axis estimate = 1.22'
[Sun May 27 04:04:11 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sun May 27 04:04:11 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun May 27 04:04:11 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Sun May 27 04:04:11 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.04"
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31.ximg exists
[Sun May 27 05:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31.csv
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May 27 05:13:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31.csv
[Sun May 27 05:13:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 05:13:28 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May 27 05:13:28 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May 27 05:13:28 2012] Fit fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun May 27 06:44:16 2012] Warning, spatial fit 31 centroid is now closest to src. 29
[Sun May 27 06:44:16 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:16 2012] Assessing source extent using major
[Sun May 27 06:44:16 2012] Source does appear to be extended
[Sun May 27 06:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 06:44:16 2012] Source is confused with source 29
[Sun May 27 06:44:34 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sun May 27 06:44:34 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun May 27 06:44:34 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.891
[Sun May 27 06:44:34 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 7.04"
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28.ximg exists
[Sun May 27 07:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28.csv
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun May 27 07:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28.csv
[Sun May 27 07:44:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun May 27 07:44:03 2012] Fit fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun May 27 09:06:17 2012] Source 31 is offset by 6.556024 and 5.406184 pixels which is larger than
2 X fitted extent = 6.148138 x 6.148138, not incorporating fit results
[Sun May 27 09:06:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:17 2012] Assessing source extent using major
[Sun May 27 09:06:17 2012] Source does appear to be extended
[Sun May 27 09:06:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:06:31 2012] XMMSAS src. selection expression = ellipse(27015.634064, 24942.550018, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 09:06:31 2012] Writing source region out to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31_src.reg
[Sun May 27 09:06:31 2012] Extracting stamp from image fullrun_pn_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (274, 250) - (349, 325)
[Sun May 27 09:06:31 2012] XMMSAS bgd. selection expression = annulus(27015.634064, 24942.550018, 1087.500000, 2175.000000, X, Y) && !ellipse(27803.873940, 26406.553000, 1156.752033, 1156.752033, 0.000000, X, Y) && !ellipse(27926.781708, 27834.585815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26930.314697, 27351.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29922.612366, 27234.554504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.569366, 26923.597473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28962.205963, 26396.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.879761, 24846.987549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27821.647600, 24418.425400, 396.533611, 396.533611, 0.000000, X, Y)
[Sun May 27 09:06:31 2012] Writing fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31.gif
[Sun May 27 09:21:28 2012] Mean detx,y = (166.06, 2224.48) 
[Sun May 27 09:21:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 09:21:41 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 09:21:41 2012] Setting source spectrum file to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun May 27 09:21:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sun May 27 09:51:00 2012] Not generating rmf since there are only 42 counts
[Sun May 27 09:51:00 2012] rmf not generated due to insufficient counts
[Sun May 27 10:55:54 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:54 2012] Error reading totcts from fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sun May 27 10:55:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:55:56 2012] Using photon index=1.80, rate=0.00521, arf fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src31.arf
[Sun May 27 10:55:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:55:56 2012] Updating source flux to 1.3e-14
[Sun May 27 10:56:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting