[Sun May 27 04:02:49 2012] Detection parameters:
  Position = (273.3, 407.0) = 18 33 33.23 -65 25 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.4 +/- 10.5
  Background counts = 13.8
  Rate = 0.005 +/- 0.001

[Sun May 27 04:02:49 2012] Off-axis axis estimate = 8.08'
[Sun May 27 04:04:11 2012] Using EEF radius (= 10.47 ")to estimate initial spatial extent for simple fitting
[Sun May 27 04:04:11 2012] Initial guess for spatial extent in simple fitting = 10.47"
[Sun May 27 04:04:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.065
[Sun May 27 04:04:11 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.47"
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 27 05:13:27 2012] Fit fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_src10 appears to have run properly
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 27 05:13:27 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 27 05:13:27 2012] Fit fullrun_pn_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun May 27 06:44:16 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.178030 pixels away
[Sun May 27 06:44:16 2012] Spatial fit model total counts = 507.750000, observed total counts = 493.000000
[Sun May 27 06:44:16 2012] Offset between fit and detection position for source 10 = 4.145418 pixels
[Sun May 27 06:44:16 2012] Warning, changing simple spatial fit ID from 10 to 14
[Sun May 27 06:44:16 2012] 385.486000 total counts/ 265.831000 bgd. counts: snr = 7.338850
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.145418 pixels
  Position = (276.7, 404.7) = 18 33 30.86 -65 26 2.1
  Extent = 20.0 (20.0-40.0)", rotation angle = 0
  Source counts = 119.7 +/- 19.6
  Background counts = 265.8
  Rate = 0.01 +/- 0.002
[Sun May 27 06:44:16 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:16 2012] Assessing source extent using major axis lower bound
[Sun May 27 06:44:16 2012] Source does appear to be extended
[Sun May 27 06:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 06:44:16 2012] Source is confused with source 11
[Sun May 27 06:44:16 2012] Source is confused with source 14
[Sun May 27 06:44:16 2012] Source is confused with source 16
[Sun May 27 06:44:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 06:44:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 06:44:34 2012] Initial guess for spatial extent in simple fitting = 20.01"
[Sun May 27 06:44:34 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.961
[Sun May 27 06:44:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 20.01"
[Sun May 27 07:44:02 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 27 07:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9.csv
[Sun May 27 07:44:02 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 27 07:44:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9.csv
[Sun May 27 07:44:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 27 07:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 27 07:44:03 2012] fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 27 07:44:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun May 27 07:44:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:06:17 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Sun May 27 09:06:17 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:17 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:06:17 2012] Source does appear to be extended
[Sun May 27 09:06:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 09:06:31 2012] XMMSAS src. selection expression = ellipse(24028.744000, 35156.366000, 1200.840035, 1200.840035, 0.000000, X, Y)
[Sun May 27 09:06:31 2012] Writing source region out to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10_src.reg
[Sun May 27 09:06:31 2012] Extracting stamp from image fullrun_pn_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (208, 336) - (346, 474)
[Sun May 27 09:06:31 2012] XMMSAS bgd. selection expression = annulus(24028.744000, 35156.366000, 2001.400058, 4002.800115, X, Y) && !ellipse(23336.782990, 34970.919586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23707.810000, 34450.762000, 1499.880043, 1499.880043, 0.000000, X, Y) && !ellipse(23567.416000, 34412.590000, 849.568024, 849.568024, 0.000000, X, Y) && !ellipse(23182.440826, 34161.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26319.198360, 32067.073000, 403.162412, 403.162412, 0.000000, X, Y)
[Sun May 27 09:06:31 2012] Writing fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10.gif
[Sun May 27 09:14:28 2012] Mean detx,y = (-4053.36, -7267.69) 
[Sun May 27 09:14:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 09:14:59 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 09:14:59 2012] Setting source spectrum file to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 27 09:14:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 27 10:55:53 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:53 2012] Error reading totcts from fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 27 10:55:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:55:55 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0679181501_pi300-10000_pass1_cl_src10.arf
[Sun May 27 10:55:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:55:55 2012] Updating source flux to 4.4e-14
[Sun May 27 10:56:43 2012] Flag c found in src. 10 procflags, skipping spectral fitting