[Sun May 27 04:03:27 2012] Detection parameters:
  Position = (358.1, 447.8) = 18 32 34.22 -65 22 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.4 +/- 12.1
  Background counts = 5.4
  Rate = 0.007 +/- 0.0009

[Sun May 27 04:03:27 2012] Off-axis axis estimate = 11.66'
[Sun May 27 06:01:52 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sun May 27 06:01:52 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sun May 27 06:01:52 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.817
[Sun May 27 06:01:52 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.26"
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7.csv
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7.csv
[Sun May 27 06:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 27 06:44:08 2012] Fit fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun May 27 06:44:25 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 15.080023 pixels away
[Sun May 27 06:44:25 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:25 2012] Assessing source extent using major
[Sun May 27 06:44:25 2012] Source does appear to be extended
[Sun May 27 06:44:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 08:23:28 2012] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Sun May 27 08:23:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 08:23:28 2012] Initial guess for spatial extent in simple fitting = 12.26"
[Sun May 27 08:23:28 2012] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.817
[Sun May 27 08:23:28 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.26"
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 27 09:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7.csv
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 27 09:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7.csv
[Sun May 27 09:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 27 09:06:11 2012] Fit fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sun May 27 09:06:23 2012] Spatial fit model total counts = 143.998000, observed total counts = 144.000000
[Sun May 27 09:06:23 2012] Offset between fit and detection position for source 7 = 0.157440 pixels
[Sun May 27 09:06:23 2012] 142.031400 total counts/ 76.278500 bgd. counts: snr = 7.528593
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.157440 pixels
  Position = (358.0, 447.7) = 18 32 34.25 -65 22 54.6
  Extent = 5.9 (4.9-7.1)", rotation angle = 0
  Source counts = 65.8 +/- 11.9
  Background counts = 76.3
  Rate = 0.005 +/- 0.0009
[Sun May 27 09:06:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:23 2012] Assessing source extent using major axis lower bound
[Sun May 27 09:06:23 2012] Source does appear to be extended
[Sun May 27 09:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 10:38:58 2012] XMMSAS src. selection expression = ellipse(31098.883200, 38900.143200, 356.094010, 356.094010, 0.000000, X, Y)
[Sun May 27 10:38:58 2012] Writing source region out to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7_src.reg
[Sun May 27 10:38:58 2012] Extracting stamp from image fullrun_mos2_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (338, 427) - (378, 468)
[Sun May 27 10:38:58 2012] XMMSAS bgd. selection expression = annulus(31098.883200, 38900.143200, 593.490017, 1186.980034, X, Y) && !ellipse(30353.377600, 40910.217000, 823.392024, 823.392024, 0.000000, X, Y)
[Sun May 27 10:38:58 2012] Writing fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7.gif
[Sun May 27 10:41:07 2012] Mean detx,y = (-2455.36, 11863.49) 
[Sun May 27 10:41:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 10:41:15 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 10:41:15 2012] Setting source spectrum file to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 27 10:41:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun May 27 10:52:53 2012] Not generating rmf since there are only 65 counts
[Sun May 27 10:52:53 2012] rmf not generated due to insufficient counts
[Sun May 27 10:55:59 2012] Updating aperture counts using extracted products
[Sun May 27 10:55:59 2012] Error reading totcts from fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun May 27 10:56:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:56:00 2012] Using photon index=1.80, rate=0.00472, arf fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src7.arf
[Sun May 27 10:56:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:56:00 2012] Updating source flux to 1.4e-13
[Sun May 27 10:56:35 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting