[Sun May 27 04:03:27 2012] Detection parameters:
  Position = (123.5, 274.6) = 18 35 18.51 -65 35 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.8 +/- 6.5
  Background counts = 3.2
  Rate = 0.002 +/- 0.0005

[Sun May 27 04:03:27 2012] Off-axis axis estimate = 12.80'
[Sun May 27 06:01:52 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sun May 27 06:01:52 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Sun May 27 06:01:52 2012] source mask rpix=2.9, npix_max = 47, mask sum = 33, frac = 0.693
[Sun May 27 06:01:52 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.83"
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26.csv
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26.csv
[Sun May 27 06:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 27 06:44:08 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May 27 06:44:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May 27 06:44:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 06:44:25 2012] Spatial fit model total counts = 50.912600, observed total counts = 41.000000
[Sun May 27 06:44:25 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 06:44:25 2012] Vigneting correction estimate = 1.000000
[Sun May 27 06:44:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 06:44:25 2012] Assessing source extent using major
[Sun May 27 06:44:25 2012] Source does appear to be extended
[Sun May 27 06:44:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 08:23:28 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sun May 27 08:23:28 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Sun May 27 08:23:28 2012] source mask rpix=2.9, npix_max = 47, mask sum = 33, frac = 0.693
[Sun May 27 08:23:28 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.83"
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26.ximg exists
[Sun May 27 09:06:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26.csv
[Sun May 27 09:06:11 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun May 27 09:06:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26.csv
[Sun May 27 09:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:06:12 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun May 27 09:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun May 27 09:06:12 2012] fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun May 27 09:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sun May 27 09:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0679181501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 09:06:23 2012] Source 24 is offset by 6.723813 and -6.657956 pixels which is larger than
2 X fitted extent = 6.252874 x 6.252874, not incorporating fit results
[Sun May 27 09:06:23 2012] Vigneting correction estimate = 1.000000
[Sun May 27 09:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 09:06:23 2012] Assessing source extent using major
[Sun May 27 09:06:23 2012] Source does appear to be extended
[Sun May 27 09:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 10:38:59 2012] XMMSAS src. selection expression = ellipse(10693.469757, 23841.259796, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 27 10:38:59 2012] Writing source region out to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24_src.reg
[Sun May 27 10:38:59 2012] Extracting stamp from image fullrun_mos2_xmm0679181501_pi300-10000_cl_sm2.00.img.gz, (86, 237) - (161, 312)
[Sun May 27 10:38:59 2012] XMMSAS bgd. selection expression = annulus(10693.469757, 23841.259796, 1087.500000, 2175.000000, X, Y)
[Sun May 27 10:38:59 2012] Writing fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24.gif
[Sun May 27 10:47:15 2012] Mean detx,y = (15958.70, -5401.32) 
[Sun May 27 10:47:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 27 10:47:41 2012] Binned source spectrum to 10 counts/bin
[Sun May 27 10:47:41 2012] Setting source spectrum file to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun May 27 10:47:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun May 27 10:55:15 2012] Not generating rmf since there are only 25 counts
[Sun May 27 10:55:15 2012] rmf not generated due to insufficient counts
[Sun May 27 10:56:00 2012] Updating aperture counts using extracted products
[Sun May 27 10:56:00 2012] Error reading totcts from fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun May 27 10:56:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 27 10:56:00 2012] Using photon index=1.80, rate=0.00185, arf fullrun_mos2_xmm0679181501_pi300-10000_pass1_cl_src24.arf
[Sun May 27 10:56:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 27 10:56:00 2012] Updating source flux to 1e-13
[Sun May 27 10:56:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting